[Wed Jan 25 01:00:37 2012] Detection parameters:
  Position = (413.2, 153.0) = 0 42 7.80 41 4 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.7 +/- 11.4
  Background counts = 6.9
  Rate = 0.004 +/- 0.0007

[Wed Jan 25 01:00:38 2012] Off-axis axis estimate = 13.43'
[Wed Jan 25 11:47:39 2012] Using EEF radius (= 13.14 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 11:47:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 25 11:47:39 2012] Initial guess for spatial extent in simple fitting = 13.14"
[Wed Jan 25 11:47:39 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.988
[Wed Jan 25 11:47:39 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 13.14"
[Wed Jan 25 17:38:55 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src76.ximg exists
[Wed Jan 25 17:38:55 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src76_1.ximg exists
[Wed Jan 25 17:38:55 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src76 appears to have run properly
[Wed Jan 25 17:38:57 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Wed Jan 25 17:38:57 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Wed Jan 25 17:38:57 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Wed Jan 25 17:39:55 2012] Source 68 is offset by 9.372967 and 1.852358 pixels which is larger than
2 X fitted extent = 3.181448 x 1.510782, not incorporating fit results
[Wed Jan 25 17:39:55 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:55 2012] Assessing source extent using major
[Wed Jan 25 17:39:55 2012] Source does appear to be extended
[Wed Jan 25 17:39:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 03:36:25 2012] Using EEF radius (= 13.14 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 03:36:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 03:36:25 2012] Initial guess for spatial extent in simple fitting = 13.14"
[Thu Jan 26 03:36:25 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.988
[Thu Jan 26 03:36:25 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 13.14"
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src72.ximg exists
[Thu Jan 26 08:57:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src72.csv
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src72_1.ximg exists
[Thu Jan 26 08:57:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src72.csv
[Thu Jan 26 08:57:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:57:38 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Thu Jan 26 08:57:38 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Thu Jan 26 08:57:38 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Thu Jan 26 08:58:31 2012] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 16.557883 pixels away
[Thu Jan 26 08:58:31 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:31 2012] Assessing source extent using major
[Thu Jan 26 08:58:31 2012] Source does appear to be extended
[Thu Jan 26 08:58:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 19:37:33 2012] XMMSAS src. selection expression = ellipse(35901.024139, 13265.131134, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 19:37:33 2012] Writing source region out to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src68_src.reg
[Fri Jan 27 19:37:33 2012] Extracting stamp from image fullrun_mos2_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (376, 116) - (451, 191)
[Fri Jan 27 19:37:33 2012] XMMSAS bgd. selection expression = annulus(35901.024139, 13265.131134, 1087.500000, 2175.000000, X, Y) && !ellipse(35121.673800, 13097.008000, 472.431214, 472.431214, 0.000000, X, Y)
[Fri Jan 27 19:37:33 2012] Writing fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src68.gif
[Fri Jan 27 20:08:11 2012] Mean detx,y = (-12642.43, -9656.62) 
[Fri Jan 27 20:08:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 20:08:25 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 20:08:25 2012] Setting source spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Fri Jan 27 20:08:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Fri Jan 27 22:50:28 2012] Not generating rmf since there are only 72 counts
[Fri Jan 27 22:50:28 2012] rmf not generated due to insufficient counts
[Fri Jan 27 22:51:23 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:23 2012] Error reading totcts from fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Fri Jan 27 22:51:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:24 2012] Using photon index=1.80, rate=0.00427, arf fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src68.arf
[Fri Jan 27 22:51:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:24 2012] Updating source flux to 1.1e-13
[Fri Jan 27 22:54:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting