[Wed Jan 25 01:00:37 2012] Detection parameters:
  Position = (455.5, 291.8) = 0 41 51.38 41 14 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.4 +/- 11.0
  Background counts = 7.0
  Rate = 0.004 +/- 0.0006

[Wed Jan 25 01:00:38 2012] Off-axis axis estimate = 11.40'
[Wed Jan 25 11:47:39 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 11:47:39 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Wed Jan 25 11:47:39 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.133
[Wed Jan 25 11:47:39 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 12.13"
[Wed Jan 25 17:38:55 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src74.ximg exists
[Wed Jan 25 17:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src74.csv
[Wed Jan 25 17:38:55 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src74_1.ximg exists
[Wed Jan 25 17:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src74.csv
[Wed Jan 25 17:38:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 17:38:57 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Wed Jan 25 17:38:57 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Wed Jan 25 17:38:57 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Wed Jan 25 17:39:55 2012] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 66 at 15.261758 pixels away
[Wed Jan 25 17:39:55 2012] Source 66 is offset by 8.324084 and 2.943891 pixels which is larger than
2 X fitted extent = 1.415503 x 1.415503, not incorporating fit results
[Wed Jan 25 17:39:55 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:55 2012] Assessing source extent using major
[Wed Jan 25 17:39:55 2012] Source does appear to be extended
[Wed Jan 25 17:39:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 03:36:25 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 03:36:25 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Thu Jan 26 03:36:25 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.133
[Thu Jan 26 03:36:25 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 12.13"
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src70.ximg exists
[Thu Jan 26 08:57:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src70.csv
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src70_1.ximg exists
[Thu Jan 26 08:57:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src70.csv
[Thu Jan 26 08:57:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:57:38 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Thu Jan 26 08:57:38 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Thu Jan 26 08:57:38 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Thu Jan 26 08:58:31 2012] Spatial fit model total counts = 131.376000, observed total counts = 134.000000
[Thu Jan 26 08:58:31 2012] Offset between fit and detection position for source 66 = 0.233451 pixels
[Thu Jan 26 08:58:31 2012] 131.836700 total counts/ 80.950300 bgd. counts: snr = 5.655780
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 0.233451 pixels
  Position = (455.3, 291.6) = 0 41 51.45 41 14 38.2
  Extent = 4.9 (3.8-6.3)", rotation angle = 0
  Source counts = 50.9 +/- 11.5
  Background counts = 81.0
  Rate = 0.003 +/- 0.0007
[Thu Jan 26 08:58:31 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:31 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:31 2012] Source does appear to be extended
[Thu Jan 26 08:58:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 19:37:33 2012] XMMSAS src. selection expression = ellipse(39564.570060, 25322.107800, 293.082008, 293.082008, 0.000000, X, Y)
[Fri Jan 27 19:37:33 2012] Writing source region out to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src66_src.reg
[Fri Jan 27 19:37:33 2012] Extracting stamp from image fullrun_mos2_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (438, 275) - (472, 308)
[Fri Jan 27 19:37:33 2012] XMMSAS bgd. selection expression = annulus(39564.570060, 25322.107800, 488.470014, 976.940028, X, Y)
[Fri Jan 27 19:37:33 2012] Writing fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src66.gif
[Fri Jan 27 20:07:46 2012] Mean detx,y = (-11681.17, 2955.95) 
[Fri Jan 27 20:07:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 20:07:55 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 20:07:55 2012] Setting source spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Fri Jan 27 20:07:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Fri Jan 27 22:50:26 2012] Not generating rmf since there are only 50 counts
[Fri Jan 27 22:50:26 2012] rmf not generated due to insufficient counts
[Fri Jan 27 22:51:23 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:23 2012] Error reading totcts from fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Fri Jan 27 22:51:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:24 2012] Using photon index=1.80, rate=0.00299, arf fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src66.arf
[Fri Jan 27 22:51:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:24 2012] Updating source flux to 7.5e-14
[Fri Jan 27 22:54:34 2012] Flag b found in src. 66 procflags, skipping spectral fitting
[Fri Jan 27 22:54:34 2012] Source 66 has fewer than 100.000000 counts, skipping spectral fitting