[Wed Jan 25 01:00:37 2012] Detection parameters:
  Position = (282.6, 303.2) = 0 42 58.08 41 15 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.3 +/- 18.6
  Background counts = 32.0
  Rate = 0.009 +/- 0.001

[Wed Jan 25 01:00:38 2012] Off-axis axis estimate = 1.20'
[Wed Jan 25 11:47:39 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 11:47:39 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Wed Jan 25 11:47:39 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.117
[Wed Jan 25 11:47:39 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 7.03"
[Wed Jan 25 17:38:55 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src61.ximg exists
[Wed Jan 25 17:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src61.csv
[Wed Jan 25 17:38:55 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src61_1.ximg exists
[Wed Jan 25 17:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src61.csv
[Wed Jan 25 17:38:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 17:38:56 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Wed Jan 25 17:38:56 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Wed Jan 25 17:38:56 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Wed Jan 25 17:39:55 2012] Source 65 is offset by -5.892259 and -7.241472 pixels which is larger than
2 X fitted extent = 1.428630 x 1.428630, not incorporating fit results
[Wed Jan 25 17:39:55 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:55 2012] Assessing source extent using major
[Wed Jan 25 17:39:55 2012] Source does appear to be extended
[Wed Jan 25 17:39:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 03:36:25 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 03:36:25 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Thu Jan 26 03:36:25 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.117
[Thu Jan 26 03:36:25 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 7.03"
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src59.ximg exists
[Thu Jan 26 08:57:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src59.csv
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu Jan 26 08:57:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src59.csv
[Thu Jan 26 08:57:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:57:38 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu Jan 26 08:57:38 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu Jan 26 08:57:38 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Thu Jan 26 08:58:31 2012] Source 65 is offset by -5.892259 and -7.241472 pixels which is larger than
2 X fitted extent = 1.430133 x 1.430133, not incorporating fit results
[Thu Jan 26 08:58:31 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:31 2012] Assessing source extent using major
[Thu Jan 26 08:58:31 2012] Source does appear to be extended
[Thu Jan 26 08:58:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 19:37:32 2012] XMMSAS src. selection expression = ellipse(24535.215424, 26331.833923, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 19:37:32 2012] Writing source region out to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src65_src.reg
[Fri Jan 27 19:37:32 2012] Extracting stamp from image fullrun_mos2_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (245, 266) - (320, 341)
[Fri Jan 27 19:37:32 2012] XMMSAS bgd. selection expression = annulus(24535.215424, 26331.833923, 1087.500000, 2175.000000, X, Y) && !ellipse(25674.518000, 25001.414000, 1451.469642, 1303.250438, 31.306200, X, Y) && !ellipse(27084.166000, 27413.739200, 661.448019, 661.448019, 0.000000, X, Y) && !ellipse(26737.124480, 26197.104400, 435.968813, 435.968813, 0.000000, X, Y) && !ellipse(25275.696800, 27010.101400, 382.920011, 382.920011, 0.000000, X, Y) && !ellipse(23434.806980, 26263.938600, 412.775212, 412.775212, 0.000000, X, Y) && !ellipse(26018.866000, 26581.696000, 797.313623, 797.313623, 0.000000, X, Y) && !ellipse(24164.294800, 27068.446600, 379.816811, 358.374745, 33.651000, X, Y) && !ellipse(26567.194305, 26935.558380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27465.296000, 25909.770000, 1108.536032, 1108.536032, 0.000000, X, Y) && !ellipse(26463.496000, 28913.980000, 1076.488031, 1076.488031, 0.000000, X, Y) && !ellipse(25831.113983, 27863.865479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26916.590851, 25254.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.085815, 28297.768951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26492.906586, 24474.741821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26398.700836, 23872.036896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23888.484802, 24430.838257, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 19:37:32 2012] Writing fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src65.gif
[Fri Jan 27 20:05:12 2012] Mean detx,y = (2621.55, -1737.03) 
[Fri Jan 27 20:05:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 20:05:23 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 20:05:23 2012] Setting source spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Fri Jan 27 20:05:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Fri Jan 27 22:46:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan 27 22:46:24 2012] rmf not generated due to insufficient counts
[Fri Jan 27 22:51:23 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:23 2012] Error reading totcts from fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Fri Jan 27 22:51:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:24 2012] Using photon index=1.80, rate=0.00947, arf fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src65.arf
[Fri Jan 27 22:51:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:24 2012] Updating source flux to 9.6e-14
[Fri Jan 27 22:54:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting