[Wed Jan 25 01:00:36 2012] Detection parameters:
  Position = (240.4, 191.0) = 0 43 14.31 41 7 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1112.0 +/- 40.0
  Background counts = 7.8
  Rate = 0.1 +/- 0.005

[Wed Jan 25 01:00:38 2012] Off-axis axis estimate = 8.85'
[Wed Jan 25 11:47:37 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 11:47:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 25 11:47:37 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Wed Jan 25 11:47:37 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003
[Wed Jan 25 11:47:37 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.85"
[Wed Jan 25 17:38:54 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jan 25 17:38:54 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jan 25 17:38:54 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src6 appears to have run properly
[Wed Jan 25 17:38:56 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jan 25 17:38:56 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jan 25 17:38:56 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Jan 25 17:39:55 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.088352 pixels away
[Wed Jan 25 17:39:55 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:55 2012] Assessing source extent using major
[Wed Jan 25 17:39:55 2012] Source does appear to be extended
[Wed Jan 25 17:39:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 03:36:25 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 03:36:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 03:36:25 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Thu Jan 26 03:36:25 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003
[Thu Jan 26 03:36:25 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.85"
[Thu Jan 26 08:57:36 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jan 26 08:57:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src6.csv
[Thu Jan 26 08:57:36 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jan 26 08:57:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src6.csv
[Thu Jan 26 08:57:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jan 26 08:57:37 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Jan 26 08:58:31 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.088352 pixels away
[Thu Jan 26 08:58:31 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:31 2012] Assessing source extent using major
[Thu Jan 26 08:58:31 2012] Source does appear to be extended
[Thu Jan 26 08:58:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 19:37:31 2012] Counts = 1111.987671, rescaling region sizes by 2.000000
[Fri Jan 27 19:37:31 2012] XMMSAS src. selection expression = ellipse(20864.535202, 16569.666885, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jan 27 19:37:31 2012] Writing source region out to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src6_src.reg
[Fri Jan 27 19:37:31 2012] Extracting stamp from image fullrun_mos2_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (165, 116) - (315, 266)
[Fri Jan 27 19:37:31 2012] XMMSAS bgd. selection expression = annulus(20864.535202, 16569.666885, 4350.000000, 8700.000000, X, Y) && !ellipse(25674.518000, 25001.414000, 1451.469642, 1303.250438, 31.306200, X, Y) && !ellipse(21734.809800, 25578.732000, 384.660011, 384.660011, 0.000000, X, Y) && !ellipse(28310.950000, 26460.580000, 1350.968039, 1350.968039, 0.000000, X, Y) && !ellipse(27304.696423, 20481.151556, 435.669599, 345.990176, 138.926437, X, Y) && !ellipse(27557.130600, 21707.212800, 389.491211, 389.491211, 0.000000, X, Y) && !ellipse(15707.663834, 25425.598083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17511.518616, 17109.188751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.895844, 25458.140778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16836.938065, 20583.179092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16429.426000, 23812.886600, 342.832010, 342.832010, 0.000000, X, Y) && !ellipse(27465.296000, 25909.770000, 1108.536032, 1108.536032, 0.000000, X, Y) && !ellipse(23448.374860, 20037.988400, 368.444011, 368.444011, 0.000000, X, Y) && !ellipse(28747.706754, 25114.124400, 258.146407, 258.146407, 0.000000, X, Y) && !ellipse(28491.547360, 23877.694400, 345.404810, 345.404810, 0.000000, X, Y) && !ellipse(24673.976840, 21193.972200, 370.450411, 370.450411, 0.000000, X, Y) && !ellipse(27529.542284, 24674.691600, 286.191208, 286.191208, 0.000000, X, Y) && !ellipse(22173.374200, 23138.612000, 327.076809, 327.076809, 0.000000, X, Y) && !ellipse(26916.590851, 25254.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26002.952789, 23263.196198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26492.906586, 24474.741821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26398.700836, 23872.036896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23888.484802, 24430.838257, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 19:37:31 2012] Writing fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src6.gif
[Fri Jan 27 19:44:14 2012] Mean detx,y = (2338.81, -12186.45) 
[Fri Jan 27 19:44:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 19:46:52 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 19:46:52 2012] Setting source spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jan 27 19:46:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jan 27 20:27:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan 27 20:27:54 2012] rmf not generated due to insufficient counts
[Fri Jan 27 22:51:22 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:22 2012] Error reading totcts from fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jan 27 22:51:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:23 2012] Using photon index=1.80, rate=0.13, arf fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src6.arf
[Fri Jan 27 22:51:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:23 2012] Updating source flux to 2.2e-12
[Fri Jan 27 22:54:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting