[Wed Jan 25 01:00:36 2012] Detection parameters:
  Position = (318.7, 312.8) = 0 42 44.14 41 16 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1575.9 +/- 49.9
  Background counts = 38.4
  Rate = 0.1 +/- 0.003

[Wed Jan 25 01:00:38 2012] Off-axis axis estimate = 1.80'
[Wed Jan 25 11:47:38 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 11:47:38 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Wed Jan 25 11:47:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.786
[Wed Jan 25 11:47:38 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.33"
[Wed Jan 25 17:38:54 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src13.ximg exists
[Wed Jan 25 17:38:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src13.csv
[Wed Jan 25 17:38:54 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Jan 25 17:38:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src13.csv
[Wed Jan 25 17:38:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 17:38:56 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Jan 25 17:38:56 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jan 25 17:38:56 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Jan 25 17:39:55 2012] Warning, spatial fit 13 centroid is now closest to src. 7
[Wed Jan 25 17:39:55 2012] Spatial fit model total counts = 2687.630000, observed total counts = 2691.000000
[Wed Jan 25 17:39:55 2012] Offset between fit and detection position for source 11 = 3.318869 pixels
[Wed Jan 25 17:39:55 2012] Warning, changing simple spatial fit ID from 13 to 43
[Wed Jan 25 17:39:55 2012] 2504.592000 total counts/ 2092.350000 bgd. counts: snr = 9.012288
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.318869 pixels
  Position = (320.4, 309.9) = 0 42 43.48 41 15 59.0
  Extent = 8.4 (7.4-9.7)", rotation angle = 0
  Source counts = 412.2 +/- 50.0
  Background counts = 2092.3
  Rate = 0.02 +/- 0.003
[Wed Jan 25 17:39:55 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:55 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 17:39:55 2012] Source does appear to be extended
[Wed Jan 25 17:39:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:39:55 2012] Source is confused with source 27
[Thu Jan 26 03:36:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 03:36:25 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Thu Jan 26 03:36:25 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.839
[Thu Jan 26 03:36:25 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.44"
[Thu Jan 26 08:57:36 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jan 26 08:57:36 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jan 26 08:57:36 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_src13 appears to have run properly
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jan 26 08:57:37 2012] fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jan 26 08:57:37 2012] Fit fullrun_mos2_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jan 26 08:58:31 2012] Spatial fit model total counts = 5133.390000, observed total counts = 5136.000000
[Thu Jan 26 08:58:31 2012] Offset between fit and detection position for source 11 = 7.641372 pixels
[Thu Jan 26 08:58:31 2012] 5119.410000 total counts/ 3701.690000 bgd. counts: snr = 23.301852
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 7.641372 pixels
  Position = (326.0, 304.7) = 0 42 41.34 41 15 36.1
  Extent = 16.9 (16.8-33.8)", rotation angle = 0
  Source counts = 1417.7 +/- 71.6
  Background counts = 3701.7
  Rate = 0.08 +/- 0.004
[Thu Jan 26 08:58:31 2012] Source 11 is offset by -0.312230 and 3.930023 pixels which is larger than
2 X fitted extent = 1.498018 x 1.498018, not incorporating fit results
[Thu Jan 26 08:58:31 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:31 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:31 2012] Source does appear to be extended
[Thu Jan 26 08:58:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 19:37:31 2012] Counts = 1417.720000, rescaling region sizes by 2.000000
[Fri Jan 27 19:37:31 2012] XMMSAS src. selection expression = ellipse(28310.950000, 26460.580000, 2026.452058, 2026.452058, 0.000000, X, Y)
[Fri Jan 27 19:37:31 2012] Writing source region out to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src11_src.reg
[Fri Jan 27 19:37:31 2012] Extracting stamp from image fullrun_mos2_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (210, 188) - (442, 421)
[Fri Jan 27 19:37:31 2012] XMMSAS bgd. selection expression = annulus(28310.950000, 26460.580000, 6754.840194, 13509.680389, X, Y) && !ellipse(25674.518000, 25001.414000, 1451.469642, 1303.250438, 31.306200, X, Y) && !ellipse(28962.299880, 27015.438494, 433.240544, 392.025338, 29.586211, X, Y) && !ellipse(32483.186000, 26448.198000, 372.062411, 329.972009, 23.526200, X, Y) && !ellipse(27084.166000, 27413.739200, 661.448019, 661.448019, 0.000000, X, Y) && !ellipse(26737.124480, 26197.104400, 435.968813, 435.968813, 0.000000, X, Y) && !ellipse(20864.535202, 16569.666885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21734.809800, 25578.732000, 384.660011, 384.660011, 0.000000, X, Y) && !ellipse(34706.518000, 30060.382000, 326.487209, 326.487209, 0.000000, X, Y) && !ellipse(25827.627200, 30433.812400, 399.720812, 399.720812, 0.000000, X, Y) && !ellipse(25275.696800, 27010.101400, 382.920011, 382.920011, 0.000000, X, Y) && !ellipse(23434.806980, 26263.938600, 412.775212, 412.775212, 0.000000, X, Y) && !ellipse(30649.992400, 27367.677600, 394.284011, 394.284011, 0.000000, X, Y) && !ellipse(26018.866000, 26581.696000, 797.313623, 797.313623, 0.000000, X, Y) && !ellipse(33468.415800, 24588.956800, 392.022411, 392.022411, 0.000000, X, Y) && !ellipse(33537.007120, 22631.577000, 461.103213, 461.103213, 0.000000, X, Y) && !ellipse(30424.982600, 23630.497600, 429.792012, 429.792012, 0.000000, X, Y) && !ellipse(27304.696423, 20481.151556, 435.669599, 345.990176, 138.926437, X, Y) && !ellipse(27557.130600, 21707.212800, 389.491211, 389.491211, 0.000000, X, Y) && !ellipse(24220.672100, 30931.800200, 398.759211, 398.759211, 0.000000, X, Y) && !ellipse(24164.294800, 27068.446600, 379.816811, 358.374745, 33.651000, X, Y) && !ellipse(34917.954220, 29320.308000, 302.719209, 302.719209, 0.000000, X, Y) && !ellipse(31788.635560, 30851.395800, 393.980011, 393.980011, 0.000000, X, Y) && !ellipse(32845.794312, 26921.797363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23262.246640, 29448.276800, 364.365645, 364.365645, 0.000000, X, Y) && !ellipse(15707.663834, 25425.598083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31310.569581, 19752.544838, 521.376570, 425.333780, 356.484844, X, Y) && !ellipse(34270.086203, 22853.237233, 309.378551, 269.109918, 324.369778, X, Y) && !ellipse(35923.145844, 29533.990417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32623.956400, 24034.567200, 298.767209, 298.767209, 0.000000, X, Y) && !ellipse(31144.398000, 13260.931400, 621.680818, 386.222411, 349.420600, X, Y) && !ellipse(26756.383728, 38205.427612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26567.194305, 26935.558380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17511.518616, 17109.188751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.895844, 25458.140778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16836.938065, 20583.179092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35121.673800, 13097.008000, 472.431214, 472.431214, 0.000000, X, Y) && !ellipse(16429.426000, 23812.886600, 342.832010, 342.832010, 0.000000, X, Y) && !ellipse(41153.889200, 21217.241600, 441.204813, 441.204813, 0.000000, X, Y) && !ellipse(30045.072937, 27354.296326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32467.319000, 24711.546000, 257.570407, 257.570407, 0.000000, X, Y) && !ellipse(27465.296000, 25909.770000, 1108.536032, 1108.536032, 0.000000, X, Y) && !ellipse(23448.374860, 20037.988400, 368.444011, 368.444011, 0.000000, X, Y) && !ellipse(28747.706754, 25114.124400, 258.146407, 258.146407, 0.000000, X, Y) && !ellipse(28491.547360, 23877.694400, 345.404810, 345.404810, 0.000000, X, Y) && !ellipse(28549.447600, 30259.671200, 446.357613, 446.357613, 0.000000, X, Y) && !ellipse(34229.287598, 29381.445709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25202.020721, 30077.089935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35046.542786, 20745.866013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24673.976840, 21193.972200, 370.450411, 370.450411, 0.000000, X, Y) && !ellipse(30619.644200, 31325.539400, 320.289609, 320.289609, 0.000000, X, Y) && !ellipse(26571.703358, 29651.808000, 225.871206, 225.871206, 0.000000, X, Y) && !ellipse(35596.141400, 32734.193400, 461.335213, 461.335213, 0.000000, X, Y) && !ellipse(26463.496000, 28913.980000, 1076.488031, 1076.488031, 0.000000, X, Y) && !ellipse(27529.542284, 24674.691600, 286.191208, 286.191208, 0.000000, X, Y) && !ellipse(17832.354200, 29866.805800, 635.610418, 635.610418, 0.000000, X, Y) && !ellipse(25831.113983, 27863.865479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29707.362262, 31873.144600, 359.242410, 359.242410, 0.000000, X, Y) && !ellipse(22173.374200, 23138.612000, 327.076809, 327.076809, 0.000000, X, Y) && !ellipse(24535.215424, 26331.833923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31292.003800, 22614.508800, 325.285609, 325.285609, 0.000000, X, Y) && !ellipse(34153.252869, 28565.486176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35885.189545, 20327.929886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26916.590851, 25254.725708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32114.145233, 36601.673096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32024.190186, 24146.309387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31777.001400, 38801.374000, 330.788810, 330.788810, 0.000000, X, Y) && !ellipse(25340.212700, 38854.078600, 795.089623, 795.089623, 0.000000, X, Y) && !ellipse(26002.952789, 23263.196198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.085815, 28297.768951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39564.570060, 25322.107800, 390.776011, 390.776011, 0.000000, X, Y) && !ellipse(26492.906586, 24474.741821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35901.024139, 13265.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23509.890900, 33205.181732, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26398.700836, 23872.036896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23888.484802, 24430.838257, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 19:37:31 2012] Writing fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src11.gif
[Fri Jan 27 19:49:35 2012] Mean detx,y = (-556.28, 47.90) 
[Fri Jan 27 19:49:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 19:54:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 19:54:46 2012] Setting source spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jan 27 19:54:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jan 27 22:51:22 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:22 2012] Error reading totcts from fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jan 27 22:51:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:23 2012] Using photon index=1.80, rate=0.0833, arf fullrun_mos2_xmm0600660301_pi300-10000_pass1_cl_src11.arf
[Fri Jan 27 22:51:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:23 2012] Updating source flux to 7.2e-13
[Fri Jan 27 22:54:34 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Fri Jan 27 22:54:34 2012] Flag c found in src. 11 procflags, skipping spectral fitting