[Wed Jan 25 01:00:02 2012] Detection parameters:
  Position = (322.9, 322.8) = 0 42 42.50 41 16 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.3 +/- 21.2
  Background counts = 31.0
  Rate = 0.01 +/- 0.001

[Wed Jan 25 01:00:02 2012] Off-axis axis estimate = 2.50'
[Wed Jan 25 07:32:40 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 07:32:40 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Jan 25 07:32:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Wed Jan 25 07:32:40 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 7.68"
[Wed Jan 25 11:47:34 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src54.ximg exists
[Wed Jan 25 11:47:34 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src54_1.ximg exists
[Wed Jan 25 11:47:34 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src54 appears to have run properly
[Wed Jan 25 11:47:36 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Wed Jan 25 11:47:36 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Wed Jan 25 11:47:36 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Wed Jan 25 17:39:38 2012] Warning, spatial fit 54 centroid is now closest to src. 7
[Wed Jan 25 17:39:38 2012] Source 60 is offset by -5.920360 and 1.772515 pixels which is larger than
2 X fitted extent = 4.375150 x 4.375150, not incorporating fit results
[Wed Jan 25 17:39:38 2012] Spatial fit model total counts = 730.100000, observed total counts = 732.000000
[Wed Jan 25 17:39:38 2012] Offset between fit and detection position for source 60 = 0.832197 pixels
[Wed Jan 25 17:39:38 2012] Warning, changing simple spatial fit ID from 54 to 83
[Wed Jan 25 17:39:38 2012] 707.385000 total counts/ 565.469000 bgd. counts: snr = 5.967975
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.832197 pixels
  Position = (322.9, 323.6) = 0 42 42.51 41 16 58.4
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 141.9 +/- 26.6
  Background counts = 565.5
  Rate = 0.008 +/- 0.002
[Wed Jan 25 17:39:38 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:38 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 17:39:38 2012] Source does appear to be extended
[Wed Jan 25 17:39:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:39:38 2012] Source is confused with source 7
[Wed Jan 25 17:39:38 2012] Source is confused with source 77
[Thu Jan 26 00:00:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 00:00:22 2012] Initial guess for spatial extent in simple fitting = 16.04"
[Thu Jan 26 00:00:22 2012] source mask rpix=3.7, npix_max = 70, mask sum = 70, frac = 0.998
[Thu Jan 26 00:00:22 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 16.04"
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src51.ximg exists
[Thu Jan 26 03:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src51.csv
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu Jan 26 03:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src51.csv
[Thu Jan 26 03:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 03:36:24 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu Jan 26 03:36:24 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu Jan 26 03:36:24 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Thu Jan 26 08:58:17 2012] Warning, spatial fit 51 centroid is now closest to src. 78
[Thu Jan 26 08:58:17 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:17 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:17 2012] Source does appear to be extended
[Thu Jan 26 08:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 17:27:29 2012] XMMSAS src. selection expression = ellipse(28045.950000, 28106.918000, 962.370028, 962.370028, 0.000000, X, Y)
[Fri Jan 27 17:27:29 2012] Writing source region out to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src60_src.reg
[Fri Jan 27 17:27:29 2012] Extracting stamp from image fullrun_mos1_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (268, 268) - (378, 379)
[Fri Jan 27 17:27:29 2012] XMMSAS bgd. selection expression = annulus(28045.950000, 28106.918000, 1603.950046, 3207.900092, X, Y) && !ellipse(25673.922615, 24994.916015, 1436.913904, 1331.523167, 49.617036, X, Y) && !ellipse(28961.217400, 27008.571000, 436.818413, 418.070412, 350.024000, X, Y) && !ellipse(27098.288340, 27392.291000, 736.250421, 736.250421, 0.000000, X, Y) && !ellipse(26743.039200, 26187.703200, 463.179213, 463.179213, 0.000000, X, Y) && !ellipse(25829.931400, 30426.267600, 390.174411, 357.700010, 351.228930, X, Y) && !ellipse(25283.474000, 26999.286000, 354.713610, 354.713610, 0.000000, X, Y) && !ellipse(30642.672800, 27353.374400, 351.975210, 351.975210, 0.000000, X, Y) && !ellipse(27520.649841, 27341.493774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25840.454376, 26556.683044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31805.322845, 30829.673920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.279266, 26250.645782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.876000, 25440.927200, 349.906410, 349.906410, 0.000000, X, Y) && !ellipse(27546.082367, 26322.944885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28749.556702, 25111.306335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.529785, 30061.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30019.860779, 27338.459076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28579.744600, 30233.610600, 358.609610, 358.609610, 0.000000, X, Y) && !ellipse(26557.277460, 28965.878800, 365.384811, 270.580808, 138.046000, X, Y) && !ellipse(30617.996800, 31296.486800, 375.997611, 375.997611, 0.000000, X, Y) && !ellipse(24505.094116, 26323.693604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27537.951620, 24664.971800, 270.064008, 270.064008, 0.000000, X, Y) && !ellipse(25911.487030, 27873.975830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.127260, 28979.425200, 364.378410, 364.378410, 0.000000, X, Y) && !ellipse(27517.092102, 28463.110901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.032074, 28040.578918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29596.837616, 28188.782654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29727.839417, 25891.258362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.503693, 28380.159821, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 17:27:29 2012] Writing fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src60.gif
[Fri Jan 27 17:49:25 2012] Mean detx,y = (1038.05, -217.38) 
[Fri Jan 27 17:49:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 17:49:37 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 17:49:37 2012] Setting source spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Fri Jan 27 17:49:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Fri Jan 27 22:51:20 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:20 2012] Error reading totcts from fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Fri Jan 27 22:51:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:22 2012] Using photon index=1.80, rate=0.00835, arf fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src60.arf
[Fri Jan 27 22:51:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:22 2012] Updating source flux to 7.9e-14
[Fri Jan 27 22:51:27 2012] Flag b found in src. 60 procflags, skipping spectral fitting
[Fri Jan 27 22:51:27 2012] Flag c found in src. 60 procflags, skipping spectral fitting