[Wed Jan 25 01:00:00 2012] Detection parameters:
  Position = (307.9, 301.3) = 0 42 48.31 41 15 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2127.7 +/- 56.7
  Background counts = 33.9
  Rate = 0.1 +/- 0.003

[Wed Jan 25 01:00:02 2012] Off-axis axis estimate = 0.71'
[Wed Jan 25 07:32:40 2012] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 07:32:40 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Wed Jan 25 07:32:40 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.943
[Wed Jan 25 07:32:40 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 6.79"
[Wed Jan 25 11:47:33 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jan 25 11:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src5.csv
[Wed Jan 25 11:47:33 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jan 25 11:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src5.csv
[Wed Jan 25 11:47:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jan 25 11:47:35 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jan 25 17:39:38 2012] Spatial fit model total counts = 3621.550000, observed total counts = 3624.000000
[Wed Jan 25 17:39:38 2012] Offset between fit and detection position for source 4 = 0.315738 pixels
[Wed Jan 25 17:39:38 2012] 3625.340000 total counts/ 2279.370000 bgd. counts: snr = 28.192135
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.315738 pixels
  Position = (307.9, 301.6) = 0 42 48.29 41 15 22.5
  Extent = 5.9 (5.6-6.2)", rotation angle = 0
  Source counts = 1346.0 +/- 60.2
  Background counts = 2279.4
  Rate = 0.08 +/- 0.004
[Wed Jan 25 17:39:38 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:38 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 17:39:38 2012] Source does appear to be extended
[Wed Jan 25 17:39:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 00:00:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 00:00:22 2012] Initial guess for spatial extent in simple fitting = 5.87"
[Thu Jan 26 00:00:22 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.876
[Thu Jan 26 00:00:22 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.87"
[Thu Jan 26 03:36:22 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jan 26 03:36:22 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jan 26 03:36:22 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jan 26 03:36:24 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jan 26 08:58:17 2012] Spatial fit model total counts = 3708.030000, observed total counts = 3715.000000
[Thu Jan 26 08:58:17 2012] Offset between fit and detection position for source 4 = 0.006693 pixels
[Thu Jan 26 08:58:17 2012] 3713.700000 total counts/ 2388.790000 bgd. counts: snr = 27.107995
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.006693 pixels
  Position = (307.9, 301.6) = 0 42 48.29 41 15 22.5
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 1324.9 +/- 60.9
  Background counts = 2388.8
  Rate = 0.08 +/- 0.004
[Thu Jan 26 08:58:17 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:17 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 08:58:17 2012] Source does appear to be extended
[Thu Jan 26 08:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 17:27:28 2012] Counts = 1324.910000, rescaling region sizes by 2.000000
[Fri Jan 27 17:27:28 2012] XMMSAS src. selection expression = ellipse(26743.039200, 26187.703200, 694.768820, 694.768820, 0.000000, X, Y)
[Fri Jan 27 17:27:28 2012] Writing source region out to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src4_src.reg
[Fri Jan 27 17:27:28 2012] Extracting stamp from image fullrun_mos1_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (268, 262) - (348, 341)
[Fri Jan 27 17:27:28 2012] XMMSAS bgd. selection expression = annulus(26743.039200, 26187.703200, 2315.896067, 4631.792133, X, Y) && !ellipse(25673.922615, 24994.916015, 1436.913904, 1331.523167, 49.617036, X, Y) && !ellipse(28961.217400, 27008.571000, 436.818413, 418.070412, 350.024000, X, Y) && !ellipse(27098.288340, 27392.291000, 736.250421, 736.250421, 0.000000, X, Y) && !ellipse(25829.931400, 30426.267600, 390.174411, 357.700010, 351.228930, X, Y) && !ellipse(21738.954200, 25577.634400, 408.913612, 408.913612, 0.000000, X, Y) && !ellipse(23434.733000, 26260.242000, 457.590413, 457.590413, 0.000000, X, Y) && !ellipse(25283.474000, 26999.286000, 354.713610, 354.713610, 0.000000, X, Y) && !ellipse(30642.672800, 27353.374400, 351.975210, 351.975210, 0.000000, X, Y) && !ellipse(27520.649841, 27341.493774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30414.512940, 23618.557000, 439.223213, 439.223213, 0.000000, X, Y) && !ellipse(24215.437500, 30924.234400, 429.994412, 429.994412, 0.000000, X, Y) && !ellipse(25840.454376, 26556.683044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.410400, 27050.723800, 356.302410, 356.302410, 0.000000, X, Y) && !ellipse(23272.810480, 29431.449400, 403.797612, 403.797612, 0.000000, X, Y) && !ellipse(31805.322845, 30829.673920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.279266, 26250.645782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.876000, 25440.927200, 349.906410, 349.906410, 0.000000, X, Y) && !ellipse(27546.082367, 26322.944885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28749.556702, 25111.306335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28482.278580, 23864.847400, 302.817609, 302.817609, 0.000000, X, Y) && !ellipse(25176.529785, 30061.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30019.860779, 27338.459076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28579.744600, 30233.610600, 358.609610, 358.609610, 0.000000, X, Y) && !ellipse(26557.277460, 28965.878800, 365.384811, 270.580808, 138.046000, X, Y) && !ellipse(24505.094116, 26323.693604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28045.950000, 28106.918000, 1283.160037, 1283.160037, 0.000000, X, Y) && !ellipse(22164.620200, 23103.637000, 348.702410, 348.702410, 0.000000, X, Y) && !ellipse(27537.951620, 24664.971800, 270.064008, 270.064008, 0.000000, X, Y) && !ellipse(25911.487030, 27873.975830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31299.027600, 22604.295400, 429.092812, 429.092812, 0.000000, X, Y) && !ellipse(27544.127260, 28979.425200, 364.378410, 364.378410, 0.000000, X, Y) && !ellipse(27517.092102, 28463.110901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.032074, 28040.578918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29596.837616, 28188.782654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23149.167999, 26975.298859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29727.839417, 25891.258362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.503693, 28380.159821, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 17:27:28 2012] Writing fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src4.gif
[Fri Jan 27 17:34:09 2012] Mean detx,y = (-820.45, -710.21) 
[Fri Jan 27 17:34:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 17:34:23 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 17:34:23 2012] Setting source spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan 27 17:34:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jan 27 22:51:20 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:20 2012] Error reading totcts from fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan 27 22:51:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:21 2012] Using photon index=1.80, rate=0.078, arf fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src4.arf
[Fri Jan 27 22:51:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:21 2012] Updating source flux to 7.8e-13