[Wed Jan 25 01:00:01 2012] Detection parameters:
  Position = (331.0, 289.2) = 0 42 39.40 41 14 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.9 +/- 21.8
  Background counts = 35.0
  Rate = 0.01 +/- 0.001

[Wed Jan 25 01:00:02 2012] Off-axis axis estimate = 2.45'
[Wed Jan 25 07:32:40 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 07:32:40 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Wed Jan 25 07:32:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783
[Wed Jan 25 07:32:40 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 7.66"
[Wed Jan 25 11:47:34 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src44.ximg exists
[Wed Jan 25 11:47:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src44.csv
[Wed Jan 25 11:47:34 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src44_1.ximg exists
[Wed Jan 25 11:47:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src44.csv
[Wed Jan 25 11:47:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Wed Jan 25 11:47:35 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Wed Jan 25 17:39:38 2012] Source 38 is offset by 7.052192 and -3.847720 pixels which is larger than
2 X fitted extent = 1.838276 x 1.838276, not incorporating fit results
[Wed Jan 25 17:39:38 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:38 2012] Assessing source extent using major
[Wed Jan 25 17:39:38 2012] Source does appear to be extended
[Wed Jan 25 17:39:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 00:00:22 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 00:00:22 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Thu Jan 26 00:00:22 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783
[Thu Jan 26 00:00:22 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 7.66"
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src41.ximg exists
[Thu Jan 26 03:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src41.csv
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu Jan 26 03:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src41.csv
[Thu Jan 26 03:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 03:36:24 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu Jan 26 03:36:24 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu Jan 26 03:36:24 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Thu Jan 26 08:58:17 2012] Source 38 is offset by 7.052192 and -3.847238 pixels which is larger than
2 X fitted extent = 1.866786 x 1.866786, not incorporating fit results
[Thu Jan 26 08:58:17 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:17 2012] Assessing source extent using major
[Thu Jan 26 08:58:17 2012] Source does appear to be extended
[Thu Jan 26 08:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 17:27:29 2012] XMMSAS src. selection expression = ellipse(28749.556702, 25111.306335, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 17:27:29 2012] Writing source region out to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src38_src.reg
[Fri Jan 27 17:27:29 2012] Extracting stamp from image fullrun_mos1_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (294, 252) - (369, 327)
[Fri Jan 27 17:27:29 2012] XMMSAS bgd. selection expression = annulus(28749.556702, 25111.306335, 1087.500000, 2175.000000, X, Y) && !ellipse(25673.922615, 24994.916015, 1436.913904, 1331.523167, 49.617036, X, Y) && !ellipse(28961.217400, 27008.571000, 436.818413, 418.070412, 350.024000, X, Y) && !ellipse(27098.288340, 27392.291000, 736.250421, 736.250421, 0.000000, X, Y) && !ellipse(26743.039200, 26187.703200, 463.179213, 463.179213, 0.000000, X, Y) && !ellipse(30642.672800, 27353.374400, 351.975210, 351.975210, 0.000000, X, Y) && !ellipse(27520.649841, 27341.493774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30414.512940, 23618.557000, 439.223213, 439.223213, 0.000000, X, Y) && !ellipse(25840.454376, 26556.683044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.279266, 26250.645782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.876000, 25440.927200, 349.906410, 349.906410, 0.000000, X, Y) && !ellipse(27546.082367, 26322.944885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28482.278580, 23864.847400, 302.817609, 302.817609, 0.000000, X, Y) && !ellipse(30019.860779, 27338.459076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28045.950000, 28106.918000, 1283.160037, 1283.160037, 0.000000, X, Y) && !ellipse(27537.951620, 24664.971800, 270.064008, 270.064008, 0.000000, X, Y) && !ellipse(25911.487030, 27873.975830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31299.027600, 22604.295400, 429.092812, 429.092812, 0.000000, X, Y) && !ellipse(26258.032074, 28040.578918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29727.839417, 25891.258362, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 17:27:29 2012] Writing fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src38.gif
[Fri Jan 27 17:47:16 2012] Mean detx,y = (-1048.21, 1485.99) 
[Fri Jan 27 17:47:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 17:47:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 17:47:27 2012] Setting source spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jan 27 17:47:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Fri Jan 27 19:17:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan 27 19:17:33 2012] rmf not generated due to insufficient counts
[Fri Jan 27 22:51:20 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:20 2012] Error reading totcts from fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jan 27 22:51:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:21 2012] Using photon index=1.80, rate=0.015, arf fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src38.arf
[Fri Jan 27 22:51:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:21 2012] Updating source flux to 1.5e-13
[Fri Jan 27 22:51:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting