[Wed Jan 25 01:00:01 2012] Detection parameters:
  Position = (378.0, 310.4) = 0 42 21.27 41 16 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 495.9 +/- 29.0
  Background counts = 20.2
  Rate = 0.03 +/- 0.002

[Wed Jan 25 01:00:02 2012] Off-axis axis estimate = 5.83'
[Wed Jan 25 07:32:40 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 07:32:40 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Wed Jan 25 07:32:40 2012] source mask rpix=2.1, npix_max = 28, mask sum = 26, frac = 0.927
[Wed Jan 25 07:32:40 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.34"
[Wed Jan 25 11:47:34 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jan 25 11:47:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src27.csv
[Wed Jan 25 11:47:34 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jan 25 11:47:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src27.csv
[Wed Jan 25 11:47:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jan 25 11:47:35 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Jan 25 17:39:38 2012] Warning, spatial fit 27 centroid is now closest to src. 2
[Wed Jan 25 17:39:38 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:38 2012] Assessing source extent using major
[Wed Jan 25 17:39:38 2012] Source does appear to be extended
[Wed Jan 25 17:39:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 17:39:38 2012] Source is confused with source 2
[Thu Jan 26 00:00:22 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 00:00:22 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Thu Jan 26 00:00:22 2012] source mask rpix=2.1, npix_max = 28, mask sum = 26, frac = 0.927
[Thu Jan 26 00:00:22 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.34"
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jan 26 03:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src25.csv
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jan 26 03:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src25.csv
[Thu Jan 26 03:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 03:36:24 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jan 26 03:36:24 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jan 26 03:36:24 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Jan 26 08:58:17 2012] Source 29 is offset by 3.941446 and 5.880923 pixels which is larger than
2 X fitted extent = 1.979572 x 1.979572, not incorporating fit results
[Thu Jan 26 08:58:17 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:17 2012] Assessing source extent using major
[Thu Jan 26 08:58:17 2012] Source does appear to be extended
[Thu Jan 26 08:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 17:27:28 2012] XMMSAS src. selection expression = ellipse(32836.185760, 26957.478302, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 17:27:28 2012] Writing source region out to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src29_src.reg
[Fri Jan 27 17:27:28 2012] Extracting stamp from image fullrun_mos1_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (340, 273) - (415, 348)
[Fri Jan 27 17:27:28 2012] XMMSAS bgd. selection expression = annulus(32836.185760, 26957.478302, 1087.500000, 2175.000000, X, Y) && !ellipse(32491.544880, 26440.961000, 379.552811, 379.552811, 0.000000, X, Y) && !ellipse(30642.672800, 27353.374400, 351.975210, 351.975210, 0.000000, X, Y) && !ellipse(33454.528809, 24593.060547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34928.561249, 29334.788879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30019.860779, 27338.459076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32371.984000, 24690.744958, 356.938947, 233.758598, 0.000000, X, Y) && !ellipse(34225.719238, 29352.264282, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 17:27:28 2012] Writing fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src29.gif
[Fri Jan 27 17:42:32 2012] Mean detx,y = (1749.52, 4581.18) 
[Fri Jan 27 17:42:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 17:42:52 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 17:42:52 2012] Setting source spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jan 27 17:42:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jan 27 19:02:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan 27 19:02:26 2012] rmf not generated due to insufficient counts
[Fri Jan 27 22:51:20 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:20 2012] Error reading totcts from fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jan 27 22:51:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:21 2012] Using photon index=1.80, rate=0.0342, arf fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src29.arf
[Fri Jan 27 22:51:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:21 2012] Updating source flux to 4e-13
[Fri Jan 27 22:51:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting