[Wed Jan 25 01:00:01 2012] Detection parameters:
  Position = (289.9, 346.1) = 0 42 55.24 41 18 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.3 +/- 19.3
  Background counts = 22.9
  Rate = 0.01 +/- 0.001

[Wed Jan 25 01:00:02 2012] Off-axis axis estimate = 3.51'
[Wed Jan 25 07:32:40 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 07:32:40 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Wed Jan 25 07:32:40 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.661
[Wed Jan 25 07:32:40 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 8.18"
[Wed Jan 25 11:47:34 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src46.ximg exists
[Wed Jan 25 11:47:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src46.csv
[Wed Jan 25 11:47:34 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src46_1.ximg exists
[Wed Jan 25 11:47:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src46.csv
[Wed Jan 25 11:47:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Wed Jan 25 11:47:35 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Wed Jan 25 17:39:38 2012] Warning, spatial fit 46 centroid is now closest to src. 12
[Wed Jan 25 17:39:38 2012] Source 21 is offset by -8.696784 and -3.075264 pixels which is larger than
2 X fitted extent = 1.520658 x 1.520658, not incorporating fit results
[Wed Jan 25 17:39:38 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:38 2012] Assessing source extent using major
[Wed Jan 25 17:39:38 2012] Source does appear to be extended
[Wed Jan 25 17:39:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 00:00:22 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 00:00:22 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Thu Jan 26 00:00:22 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.661
[Thu Jan 26 00:00:22 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 8.18"
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src43.ximg exists
[Thu Jan 26 03:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src43.csv
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src43_1.ximg exists
[Thu Jan 26 03:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src43.csv
[Thu Jan 26 03:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 03:36:24 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Thu Jan 26 03:36:24 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Thu Jan 26 03:36:24 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Thu Jan 26 08:58:17 2012] Source 21 is offset by -7.582071 and -4.168896 pixels which is larger than
2 X fitted extent = 2.058612 x 2.058612, not incorporating fit results
[Thu Jan 26 08:58:17 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:17 2012] Assessing source extent using major
[Thu Jan 26 08:58:17 2012] Source does appear to be extended
[Thu Jan 26 08:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 17:27:29 2012] XMMSAS src. selection expression = ellipse(25176.529785, 30061.704041, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 17:27:29 2012] Writing source region out to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src21_src.reg
[Fri Jan 27 17:27:29 2012] Extracting stamp from image fullrun_mos1_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (252, 309) - (327, 384)
[Fri Jan 27 17:27:29 2012] XMMSAS bgd. selection expression = annulus(25176.529785, 30061.704041, 1087.500000, 2175.000000, X, Y) && !ellipse(27098.288340, 27392.291000, 736.250421, 736.250421, 0.000000, X, Y) && !ellipse(25829.931400, 30426.267600, 390.174411, 357.700010, 351.228930, X, Y) && !ellipse(27520.649841, 27341.493774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24215.437500, 30924.234400, 429.994412, 429.994412, 0.000000, X, Y) && !ellipse(23272.810480, 29431.449400, 403.797612, 403.797612, 0.000000, X, Y) && !ellipse(26557.277460, 28965.878800, 365.384811, 270.580808, 138.046000, X, Y) && !ellipse(28045.950000, 28106.918000, 1283.160037, 1283.160037, 0.000000, X, Y) && !ellipse(25911.487030, 27873.975830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.127260, 28979.425200, 364.378410, 364.378410, 0.000000, X, Y) && !ellipse(27517.092102, 28463.110901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.032074, 28040.578918, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 17:27:29 2012] Writing fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src21.gif
[Fri Jan 27 17:47:39 2012] Mean detx,y = (2312.67, -3466.17) 
[Fri Jan 27 17:47:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 17:47:49 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 17:47:49 2012] Setting source spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jan 27 17:47:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Jan 27 19:21:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan 27 19:21:10 2012] rmf not generated due to insufficient counts
[Fri Jan 27 22:51:20 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:20 2012] Error reading totcts from fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jan 27 22:51:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:21 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src21.arf
[Fri Jan 27 22:51:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:21 2012] Updating source flux to 1.7e-13
[Fri Jan 27 22:51:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting