[Wed Jan 25 01:00:00 2012] Detection parameters:
  Position = (295.7, 287.9) = 0 42 53.03 41 14 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24467.8 +/- 190.8
  Background counts = 29.3
  Rate = 2 +/- 0.01

[Wed Jan 25 01:00:02 2012] Off-axis axis estimate = 0.79'
[Wed Jan 25 07:32:40 2012] Using EEF radius (= 6.82 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 07:32:40 2012] Initial guess for spatial extent in simple fitting = 6.82"
[Wed Jan 25 07:32:40 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.935
[Wed Jan 25 07:32:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.82"
[Wed Jan 25 11:47:33 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan 25 11:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 11:47:33 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan 25 11:47:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 11:47:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan 25 11:47:35 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan 25 11:47:35 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan 25 17:39:37 2012] Spatial fit model total counts = 22136.800000, observed total counts = 22137.000000
[Wed Jan 25 17:39:37 2012] Offset between fit and detection position for source 1 = 0.060847 pixels
[Wed Jan 25 17:39:37 2012] 22246.970000 total counts/ 5063.870000 bgd. counts: snr = 241.468366
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.060847 pixels
  Position = (295.7, 287.9) = 0 42 53.03 41 14 22.9
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 17183.1 +/- 149.2
  Background counts = 5063.9
  Rate = 1 +/- 0.009
[Wed Jan 25 17:39:38 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 17:39:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 17:39:38 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 17:39:38 2012] Source does appear to be extended
[Wed Jan 25 17:39:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 00:00:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 00:00:22 2012] Initial guess for spatial extent in simple fitting = 5.76"
[Thu Jan 26 00:00:22 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.901
[Thu Jan 26 00:00:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.76"
[Thu Jan 26 03:36:22 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan 26 03:36:22 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan 26 03:36:22 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan 26 03:36:23 2012] fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan 26 03:36:23 2012] Fit fullrun_mos1_xmm0600660301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan 26 08:58:17 2012] Spatial fit model total counts = 22144.800000, observed total counts = 22137.000000
[Thu Jan 26 08:58:17 2012] Offset between fit and detection position for source 1 = 0.003383 pixels
[Thu Jan 26 08:58:17 2012] 22254.800000 total counts/ 5058.800000 bgd. counts: snr = 241.770708
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003383 pixels
  Position = (295.7, 287.9) = 0 42 53.03 41 14 22.9
  Extent = 6.0" x 5.5", rotation angle = 50
  Source counts = 17196.0 +/- 149.2
  Background counts = 5058.8
  Rate = 1 +/- 0.009
[Thu Jan 26 08:58:17 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 08:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 08:58:17 2012] Assessing source extent using major
[Thu Jan 26 08:58:17 2012] Source does appear to be extended
[Thu Jan 26 08:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.08
[Fri Jan 27 17:27:27 2012] Counts = 17196.000000, rescaling region sizes by 3.000000
[Fri Jan 27 17:27:27 2012] XMMSAS src. selection expression = ellipse(25673.922615, 24994.916015, 1077.685428, 998.642375, 49.617036, X, Y)
[Fri Jan 27 17:27:27 2012] Writing source region out to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src1_src.reg
[Fri Jan 27 17:27:27 2012] Extracting stamp from image fullrun_mos1_xmm0600660301_pi300-10000_cl_sm2.00.img.gz, (234, 226) - (358, 350)
[Fri Jan 27 17:27:27 2012] XMMSAS bgd. selection expression = annulus(25673.922615, 24994.916015, 5388.427141, 10776.854282, X, Y) && !ellipse(28961.217400, 27008.571000, 436.818413, 418.070412, 350.024000, X, Y) && !ellipse(32491.544880, 26440.961000, 379.552811, 379.552811, 0.000000, X, Y) && !ellipse(27098.288340, 27392.291000, 736.250421, 736.250421, 0.000000, X, Y) && !ellipse(26743.039200, 26187.703200, 463.179213, 463.179213, 0.000000, X, Y) && !ellipse(25829.931400, 30426.267600, 390.174411, 357.700010, 351.228930, X, Y) && !ellipse(21738.954200, 25577.634400, 408.913612, 408.913612, 0.000000, X, Y) && !ellipse(23434.733000, 26260.242000, 457.590413, 457.590413, 0.000000, X, Y) && !ellipse(25283.474000, 26999.286000, 354.713610, 354.713610, 0.000000, X, Y) && !ellipse(30642.672800, 27353.374400, 351.975210, 351.975210, 0.000000, X, Y) && !ellipse(34698.560400, 30068.565880, 380.764811, 380.764811, 0.000000, X, Y) && !ellipse(27520.649841, 27341.493774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.924000, 21083.696600, 405.650412, 405.650412, 0.000000, X, Y) && !ellipse(33532.421442, 22607.630800, 501.037614, 501.037614, 0.000000, X, Y) && !ellipse(30414.512940, 23618.557000, 439.223213, 439.223213, 0.000000, X, Y) && !ellipse(24215.437500, 30924.234400, 429.994412, 429.994412, 0.000000, X, Y) && !ellipse(27291.303101, 20474.126419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25840.454376, 26556.683044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33454.528809, 24593.060547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.410400, 27050.723800, 356.302410, 356.302410, 0.000000, X, Y) && !ellipse(34928.561249, 29334.788879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23272.810480, 29431.449400, 403.797612, 403.797612, 0.000000, X, Y) && !ellipse(31306.275574, 19738.554535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32836.185760, 26957.478302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31805.322845, 30829.673920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35935.486420, 29593.237396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32598.010800, 24008.623400, 314.975209, 314.975209, 0.000000, X, Y) && !ellipse(15684.802704, 25378.941254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.279266, 26250.645782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33566.788000, 22616.168000, 1622.160047, 1622.160047, 0.000000, X, Y) && !ellipse(23404.111877, 33354.641296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.876000, 25440.927200, 349.906410, 349.906410, 0.000000, X, Y) && !ellipse(16365.866837, 23798.428864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27546.082367, 26322.944885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16796.540466, 20576.757904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32154.700806, 36580.666504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28749.556702, 25111.306335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28482.278580, 23864.847400, 302.817609, 302.817609, 0.000000, X, Y) && !ellipse(25176.529785, 30061.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30019.860779, 27338.459076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32371.984000, 24690.744958, 356.938947, 233.758598, 0.000000, X, Y) && !ellipse(28579.744600, 30233.610600, 358.609610, 358.609610, 0.000000, X, Y) && !ellipse(34225.719238, 29352.264282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26557.277460, 28965.878800, 365.384811, 270.580808, 138.046000, X, Y) && !ellipse(30617.996800, 31296.486800, 375.997611, 375.997611, 0.000000, X, Y) && !ellipse(24505.094116, 26323.693604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28045.950000, 28106.918000, 1283.160037, 1283.160037, 0.000000, X, Y) && !ellipse(35627.386200, 32743.079193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22164.620200, 23103.637000, 348.702410, 348.702410, 0.000000, X, Y) && !ellipse(29696.686700, 31858.214000, 390.510411, 390.510411, 0.000000, X, Y) && !ellipse(35044.672400, 20739.251600, 495.041614, 495.041614, 0.000000, X, Y) && !ellipse(27537.951620, 24664.971800, 270.064008, 270.064008, 0.000000, X, Y) && !ellipse(25911.487030, 27873.975830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31299.027600, 22604.295400, 429.092812, 429.092812, 0.000000, X, Y) && !ellipse(27544.127260, 28979.425200, 364.378410, 364.378410, 0.000000, X, Y) && !ellipse(27517.092102, 28463.110901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.032074, 28040.578918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17825.014400, 29968.446600, 417.065612, 417.065612, 0.000000, X, Y) && !ellipse(29596.837616, 28188.782654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23149.167999, 26975.298859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29727.839417, 25891.258362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.503693, 28380.159821, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 17:27:27 2012] Writing fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src1.gif
[Fri Jan 27 17:27:35 2012] Mean detx,y = (-2338.16, -1243.87) 
[Fri Jan 27 17:27:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 17:31:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 17:31:36 2012] Setting source spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan 27 17:31:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jan 27 22:51:19 2012] Updating aperture counts using extracted products
[Fri Jan 27 22:51:19 2012] Error reading totcts from fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan 27 22:51:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:51:21 2012] Using photon index=1.80, rate=1.01, arf fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src1.arf
[Fri Jan 27 22:51:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:51:21 2012] Updating source flux to 1e-11
[Fri Jan 27 22:54:34 2012] Reading fit data from xmm0600660301/analysis//spectral/fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jan 27 22:54:34 2012] Spectral fit parameter nH value = 1.98566e+21
[Fri Jan 27 22:54:34 2012] Spectral fit parameter PhoIndex value = 2.35785
[Fri Jan 27 22:54:34 2012] Failed to get F(0.3-8.0) from xmm0600660301/analysis//spectral/fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jan 27 22:54:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 22:54:34 2012] Using Nh = 2e+21, photon index=2.36, rate=1.01, arf fullrun_mos1_xmm0600660301_pi300-10000_pass1_cl_src1.arf
[Fri Jan 27 22:54:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 22:54:34 2012] Updating source flux to 9.4e-12