[Mon Jan 23 10:16:48 2012] Detection parameters:
  Position = (315.2, 286.2) = 0 42 44.86 41 14 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 240.1 +/- 28.2
  Background counts = 114.9
  Rate = 0.02 +/- 0.002

[Mon Jan 23 10:16:48 2012] Off-axis axis estimate = 1.50'
[Mon Jan 23 10:20:59 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:20:59 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Mon Jan 23 10:20:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Mon Jan 23 10:20:59 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 7.18"
[Mon Jan 23 16:04:52 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src87.ximg exists
[Mon Jan 23 16:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src87.csv
[Mon Jan 23 16:04:52 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src87_1.ximg exists
[Mon Jan 23 16:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src87.csv
[Mon Jan 23 16:04:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:04:54 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Mon Jan 23 16:04:54 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Mon Jan 23 16:04:54 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Mon Jan 23 23:43:38 2012] Warning, spatial fit 87 centroid is now closest to src. 29
[Mon Jan 23 23:43:38 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:38 2012] Assessing source extent using major
[Mon Jan 23 23:43:38 2012] Source does appear to be extended
[Mon Jan 23 23:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:44:31 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:44:31 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Mon Jan 23 23:44:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Mon Jan 23 23:44:31 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 7.18"
[Tue Jan 24 06:19:09 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src75.ximg exists
[Tue Jan 24 06:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src75.csv
[Tue Jan 24 06:19:09 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src75_1.ximg exists
[Tue Jan 24 06:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src75.csv
[Tue Jan 24 06:19:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 06:19:11 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Tue Jan 24 06:19:11 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Tue Jan 24 06:19:11 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Tue Jan 24 12:46:52 2012] Source 97 is offset by -6.107877 and -7.366801 pixels which is larger than
2 X fitted extent = 1.928625 x 1.928625, not incorporating fit results
[Tue Jan 24 12:46:52 2012] Spatial fit model total counts = 2984.600000, observed total counts = 2981.000000
[Tue Jan 24 12:46:52 2012] Offset between fit and detection position for source 97 = 2.425093 pixels
[Tue Jan 24 12:46:52 2012] Warning, changing simple spatial fit ID from 75 to 76
[Tue Jan 24 12:46:52 2012] 2928.713000 total counts/ 2576.890000 bgd. counts: snr = 6.930687
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 2.425093 pixels
  Position = (316.1, 288.5) = 0 42 44.51 41 14 18.0
  Extent = 15.0 (15.0-30.0)", rotation angle = 0
  Source counts = 351.8 +/- 54.1
  Background counts = 2576.9
  Rate = 0.02 +/- 0.003
[Tue Jan 24 12:46:52 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:46:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:46:52 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 12:46:52 2012] Source does appear to be extended
[Tue Jan 24 12:46:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 12:46:52 2012] Source is confused with source 99
[Tue Jan 24 12:48:16 2012] XMMSAS src. selection expression = ellipse(27451.844000, 25049.440000, 900.984026, 900.984026, 0.000000, X, Y)
[Tue Jan 24 12:48:16 2012] Writing source region out to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src97_src.reg
[Tue Jan 24 12:48:16 2012] Extracting stamp from image fullrun_pn_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (264, 237) - (368, 340)
[Tue Jan 24 12:48:16 2012] XMMSAS bgd. selection expression = annulus(27451.844000, 25049.440000, 1501.640043, 3003.280086, X, Y) && !ellipse(25530.608380, 25151.703200, 1427.298765, 1427.298765, 0.000000, X, Y) && !ellipse(28817.293600, 27170.317880, 1393.632040, 1393.632040, 0.000000, X, Y) && !ellipse(26616.298400, 26368.476600, 538.513615, 538.513615, 0.000000, X, Y) && !ellipse(27353.699200, 27417.879800, 5495.208158, 5495.208158, 0.000000, X, Y) && !ellipse(25674.535400, 26696.622400, 400.104812, 400.104812, 0.000000, X, Y) && !ellipse(26915.796000, 27618.886000, 605.541617, 482.880014, 64.161000, X, Y) && !ellipse(30500.028137, 27765.679840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30327.634000, 23796.508000, 342.293760, 342.293760, 0.000000, X, Y) && !ellipse(26418.656036, 27095.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.849442, 27211.086193, 446.541001, 386.634918, 99.748143, X, Y) && !ellipse(28141.193909, 26499.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31146.833099, 22833.100037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.666400, 21857.862600, 444.481613, 444.481613, 0.000000, X, Y) && !ellipse(27367.214780, 28714.319200, 1239.712036, 859.960025, 38.743600, X, Y) && !ellipse(28961.432000, 28712.872000, 905.376026, 905.376026, 0.000000, X, Y) && !ellipse(27943.112793, 28443.352173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28893.261000, 28293.922000, 1307.384038, 1307.384038, 0.000000, X, Y) && !ellipse(26330.617920, 28012.950684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.336000, 27668.604000, 1182.456034, 482.920814, 103.567700, X, Y) && !ellipse(25111.362091, 28079.188354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29798.438000, 28017.049000, 1294.248037, 1294.248037, 0.000000, X, Y) && !ellipse(31830.008000, 27571.479800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(24922.852356, 27279.522736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.134000, 26661.528000, 606.943217, 606.943217, 0.000000, X, Y) && !ellipse(24403.865814, 26485.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28598.169800, 25267.451000, 283.666408, 283.666408, 0.000000, X, Y) && !ellipse(28073.904846, 24481.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.167236, 24521.475647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23852.996656, 24553.577739, 700.083391, 340.815488, 339.075359, X, Y) && !ellipse(30956.143585, 24479.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27613.026276, 24071.628723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23690.156769, 23873.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28340.213400, 24036.768600, 423.804012, 423.804012, 0.000000, X, Y) && !ellipse(26226.912000, 23111.864000, 1181.272034, 1181.272034, 0.000000, X, Y) && !ellipse(24580.000800, 21788.774000, 1293.272037, 355.507210, 290.754000, X, Y)
[Tue Jan 24 12:48:16 2012] Writing fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src97.gif
[Tue Jan 24 14:53:59 2012] Mean detx,y = (616.37, 1768.49) 
[Tue Jan 24 14:54:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 14:54:30 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 14:54:31 2012] Setting source spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Tue Jan 24 14:54:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Wed Jan 25 12:14:39 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:39 2012] Error reading totcts from fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Wed Jan 25 12:14:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:45 2012] Using photon index=1.80, rate=0.0209, arf fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src97.arf
[Wed Jan 25 12:14:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:45 2012] Updating source flux to 4.8e-14
[Wed Jan 25 12:30:39 2012] Flag b found in src. 97 procflags, skipping spectral fitting
[Wed Jan 25 12:30:39 2012] Flag c found in src. 97 procflags, skipping spectral fitting