[Mon Jan 23 10:16:48 2012] Detection parameters:
  Position = (371.8, 286.0) = 0 42 23.01 41 14 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 559.1 +/- 31.8
  Background counts = 75.8
  Rate = 0.05 +/- 0.003

[Mon Jan 23 10:16:48 2012] Off-axis axis estimate = 5.40'
[Mon Jan 23 10:20:59 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:20:59 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Mon Jan 23 10:20:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 27, frac = 1.000
[Mon Jan 23 10:20:59 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 9.13"
[Mon Jan 23 16:04:52 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src85.ximg exists
[Mon Jan 23 16:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src85.csv
[Mon Jan 23 16:04:52 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src85_1.ximg exists
[Mon Jan 23 16:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src85.csv
[Mon Jan 23 16:04:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:04:54 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Mon Jan 23 16:04:54 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Mon Jan 23 16:04:54 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Mon Jan 23 23:43:38 2012] Source 95 is offset by -1.879484 and 7.221615 pixels which is larger than
2 X fitted extent = 1.630386 x 1.630386, not incorporating fit results
[Mon Jan 23 23:43:38 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:38 2012] Assessing source extent using major
[Mon Jan 23 23:43:38 2012] Source does appear to be extended
[Mon Jan 23 23:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:44:31 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:44:31 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Mon Jan 23 23:44:31 2012] source mask rpix=2.1, npix_max = 27, mask sum = 27, frac = 1.000
[Mon Jan 23 23:44:31 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 9.13"
[Tue Jan 24 06:19:09 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src73.ximg exists
[Tue Jan 24 06:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src73.csv
[Tue Jan 24 06:19:09 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src73_1.ximg exists
[Tue Jan 24 06:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src73.csv
[Tue Jan 24 06:19:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 06:19:11 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Tue Jan 24 06:19:11 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Tue Jan 24 06:19:11 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Tue Jan 24 12:46:52 2012] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 95 at 10.792230 pixels away
[Tue Jan 24 12:46:52 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:46:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:46:52 2012] Assessing source extent using major
[Tue Jan 24 12:46:52 2012] Source does appear to be extended
[Tue Jan 24 12:46:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 12:48:16 2012] XMMSAS src. selection expression = ellipse(32301.916870, 24833.072540, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 12:48:16 2012] Writing source region out to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src95_src.reg
[Tue Jan 24 12:48:16 2012] Extracting stamp from image fullrun_pn_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (334, 248) - (409, 323)
[Tue Jan 24 12:48:16 2012] XMMSAS bgd. selection expression = annulus(32301.916870, 24833.072540, 1087.500000, 2175.000000, X, Y) && !ellipse(28817.293600, 27170.317880, 1393.632040, 1393.632040, 0.000000, X, Y) && !ellipse(27353.699200, 27417.879800, 5495.208158, 5495.208158, 0.000000, X, Y) && !ellipse(30500.028137, 27765.679840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30327.634000, 23796.508000, 342.293760, 342.293760, 0.000000, X, Y) && !ellipse(33392.861800, 22788.704200, 390.891211, 390.891211, 0.000000, X, Y) && !ellipse(32682.418000, 27100.384000, 503.720014, 402.474412, 344.619700, X, Y) && !ellipse(32446.000000, 26268.561920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33323.454600, 24735.717000, 418.349612, 418.349612, 0.000000, X, Y) && !ellipse(32463.152400, 24173.722000, 411.871212, 354.822410, 111.132000, X, Y) && !ellipse(31146.833099, 22833.100037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28893.261000, 28293.922000, 1307.384038, 1307.384038, 0.000000, X, Y) && !ellipse(29798.438000, 28017.049000, 1294.248037, 1294.248037, 0.000000, X, Y) && !ellipse(31830.008000, 27571.479800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(30326.134000, 26661.528000, 606.943217, 606.943217, 0.000000, X, Y) && !ellipse(32103.100311, 26445.925842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30956.143585, 24479.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34317.554047, 22911.888031, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 12:48:16 2012] Writing fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src95.gif
[Tue Jan 24 14:52:22 2012] Mean detx,y = (5483.18, 865.57) 
[Tue Jan 24 14:52:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 14:52:56 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 14:52:56 2012] Setting source spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Tue Jan 24 14:52:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Wed Jan 25 04:47:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 04:47:58 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:39 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:39 2012] Error reading totcts from fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Wed Jan 25 12:14:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:45 2012] Using photon index=1.80, rate=0.0458, arf fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src95.arf
[Wed Jan 25 12:14:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:45 2012] Updating source flux to 1.4e-13
[Wed Jan 25 12:30:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting