[Mon Jan 23 10:16:47 2012] Detection parameters: Position = (336.9, 323.3) = 0 42 36.46 41 16 44.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 234.9 +/- 25.7 Background counts = 102.5 Rate = 0.02 +/- 0.002 [Mon Jan 23 10:16:48 2012] Off-axis axis estimate = 3.32' [Mon Jan 23 10:20:59 2012] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 10:20:59 2012] Initial guess for spatial extent in simple fitting = 8.09" [Mon Jan 23 10:20:59 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.808 [Mon Jan 23 10:20:59 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 8.09" [Mon Jan 23 16:04:52 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src77.ximg exists [Mon Jan 23 16:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src77.csv [Mon Jan 23 16:04:52 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src77_1.ximg exists [Mon Jan 23 16:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src77.csv [Mon Jan 23 16:04:52 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src77_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 23 16:04:54 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src77.ximg exists [Mon Jan 23 16:04:54 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists [Mon Jan 23 16:04:54 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly [Mon Jan 23 23:43:38 2012] Source 84 is offset by 5.906756 and 6.704541 pixels which is larger than 2 X fitted extent = 2.275536 x 2.275536, not incorporating fit results [Mon Jan 23 23:43:38 2012] Vigneting correction estimate = 1.000000 [Mon Jan 23 23:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 23 23:43:38 2012] Assessing source extent using major [Mon Jan 23 23:43:38 2012] Source does appear to be extended [Mon Jan 23 23:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 23 23:43:38 2012] Source is confused with source 78 [Mon Jan 23 23:44:31 2012] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 23:44:31 2012] Initial guess for spatial extent in simple fitting = 8.09" [Mon Jan 23 23:44:31 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.808 [Mon Jan 23 23:44:31 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 8.09" [Tue Jan 24 06:19:09 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src65.ximg exists [Tue Jan 24 06:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src65.csv [Tue Jan 24 06:19:09 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src65_1.ximg exists [Tue Jan 24 06:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src65.csv [Tue Jan 24 06:19:09 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src65_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jan 24 06:19:10 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src65.ximg exists [Tue Jan 24 06:19:10 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists [Tue Jan 24 06:19:11 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly [Tue Jan 24 12:46:52 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 84 at 13.644898 pixels away [Tue Jan 24 12:46:52 2012] Spatial fit model total counts = 3567.030000, observed total counts = 3574.000000 [Tue Jan 24 12:46:52 2012] Offset between fit and detection position for source 84 = 6.176137 pixels [Tue Jan 24 12:46:52 2012] 2134.940000 total counts/ 1415.190000 bgd. counts: snr = 19.132613 Spatial fit parameters: Offset between fit and detection position for source 84 = 6.176137 pixels Position = (343.1, 322.6) = 0 42 34.10 41 16 46.3 Extent = 16.2 (16.1-32.4)", rotation angle = 0 Source counts = 719.8 +/- 46.2 Background counts = 1415.2 Rate = 0.04 +/- 0.003 [Tue Jan 24 12:46:52 2012] Vigneting correction estimate = 1.000000 [Tue Jan 24 12:46:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jan 24 12:46:52 2012] Assessing source extent using major axis lower bound [Tue Jan 24 12:46:52 2012] Source does appear to be extended [Tue Jan 24 12:46:52 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jan 24 12:48:15 2012] XMMSAS src. selection expression = ellipse(29798.438000, 28017.049000, 970.686028, 970.686028, 0.000000, X, Y) [Tue Jan 24 12:48:15 2012] Writing source region out to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src84_src.reg [Tue Jan 24 12:48:15 2012] Extracting stamp from image fullrun_pn_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (287, 267) - (399, 378) [Tue Jan 24 12:48:15 2012] XMMSAS bgd. selection expression = annulus(29798.438000, 28017.049000, 1617.810047, 3235.620093, X, Y) && !ellipse(25530.608380, 25151.703200, 1427.298765, 1427.298765, 0.000000, X, Y) && !ellipse(28817.293600, 27170.317880, 1393.632040, 1393.632040, 0.000000, X, Y) && !ellipse(26616.298400, 26368.476600, 538.513615, 538.513615, 0.000000, X, Y) && !ellipse(27353.699200, 27417.879800, 5495.208158, 5495.208158, 0.000000, X, Y) && !ellipse(26915.796000, 27618.886000, 605.541617, 482.880014, 64.161000, X, Y) && !ellipse(30500.028137, 27765.679840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30472.866340, 31465.517400, 471.392014, 399.396811, 17.418645, X, Y) && !ellipse(26418.656036, 27095.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32682.418000, 27100.384000, 503.720014, 402.474412, 344.619700, X, Y) && !ellipse(28141.193909, 26499.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.000000, 26268.561920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33323.454600, 24735.717000, 418.349612, 418.349612, 0.000000, X, Y) && !ellipse(27367.214780, 28714.319200, 1239.712036, 859.960025, 38.743600, X, Y) && !ellipse(29589.809753, 31971.193146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31575.649536, 31108.377655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26299.952332, 30544.760071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28455.803600, 30390.654400, 468.292813, 468.292813, 0.000000, X, Y) && !ellipse(28093.257355, 29687.873260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.643890, 29111.333649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28961.432000, 28712.872000, 905.376026, 905.376026, 0.000000, X, Y) && !ellipse(26426.915400, 29119.820400, 409.036012, 409.036012, 0.000000, X, Y) && !ellipse(27943.112793, 28443.352173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28893.261000, 28293.922000, 1307.384038, 1307.384038, 0.000000, X, Y) && !ellipse(26330.617920, 28012.950684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.336000, 27668.604000, 1182.456034, 482.920814, 103.567700, X, Y) && !ellipse(31830.008000, 27571.479800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(30326.134000, 26661.528000, 606.943217, 606.943217, 0.000000, X, Y) && !ellipse(32103.100311, 26445.925842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32301.916870, 24833.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28598.169800, 25267.451000, 283.666408, 283.666408, 0.000000, X, Y) && !ellipse(27451.844000, 25049.440000, 1201.312035, 1201.312035, 0.000000, X, Y) && !ellipse(28073.904846, 24481.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.167236, 24521.475647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30956.143585, 24479.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27613.026276, 24071.628723, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jan 24 12:48:15 2012] Writing fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src84.gif [Tue Jan 24 14:41:15 2012] Mean detx,y = (2304.46, -1407.46) [Tue Jan 24 14:41:20 2012] Setting backscal keywords in source and bgd. spectrum [Tue Jan 24 14:42:15 2012] Binned source spectrum to 10 counts/bin [Tue Jan 24 14:42:16 2012] Setting source spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src84_src_b10.pi.gz [Tue Jan 24 14:42:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src84_bgd.pi.gz [Wed Jan 25 12:14:39 2012] Updating aperture counts using extracted products [Wed Jan 25 12:14:39 2012] Error reading totcts from fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src84_src_b10.pi.gz [Wed Jan 25 12:14:44 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 25 12:14:44 2012] Using photon index=1.80, rate=0.0427, arf fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src84.arf [Wed Jan 25 12:14:44 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 25 12:14:45 2012] Updating source flux to 1e-13 [Wed Jan 25 12:30:39 2012] Flag b found in src. 84 procflags, skipping spectral fitting [Wed Jan 25 12:30:39 2012] Flag c found in src. 84 procflags, skipping spectral fitting