[Mon Jan 23 10:16:47 2012] Detection parameters:
  Position = (333.9, 330.9) = 0 42 37.62 41 17 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.2 +/- 21.3
  Background counts = 96.8
  Rate = 0.01 +/- 0.002

[Mon Jan 23 10:16:48 2012] Off-axis axis estimate = 3.49'
[Mon Jan 23 10:20:59 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:20:59 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Mon Jan 23 10:20:59 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.884
[Mon Jan 23 10:20:59 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 8.17"
[Mon Jan 23 16:04:52 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src66.ximg exists
[Mon Jan 23 16:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src66.csv
[Mon Jan 23 16:04:52 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src66_1.ximg exists
[Mon Jan 23 16:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src66.csv
[Mon Jan 23 16:04:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:04:54 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Mon Jan 23 16:04:54 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Mon Jan 23 16:04:54 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Mon Jan 23 23:43:38 2012] Spatial fit model total counts = 1765.880000, observed total counts = 1769.000000
[Mon Jan 23 23:43:38 2012] Offset between fit and detection position for source 73 = 0.549285 pixels
[Mon Jan 23 23:43:38 2012] Warning, changing simple spatial fit ID from 66 to 64
[Mon Jan 23 23:43:38 2012] 1571.609000 total counts/ 1341.020000 bgd. counts: snr = 6.296815
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 0.549285 pixels
  Position = (333.4, 330.6) = 0 42 37.81 41 17 21.1
  Extent = 11.3 (10.1-13.2)", rotation angle = 0
  Source counts = 230.6 +/- 39.6
  Background counts = 1341.0
  Rate = 0.01 +/- 0.002
[Mon Jan 23 23:43:38 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:38 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:43:38 2012] Source does appear to be extended
[Mon Jan 23 23:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:43:38 2012] Source is confused with source 78
[Mon Jan 23 23:44:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:44:31 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Mon Jan 23 23:44:31 2012] source mask rpix=2.6, npix_max = 38, mask sum = 46, frac = 1.195
[Mon Jan 23 23:44:31 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 11.32"
[Tue Jan 24 06:19:09 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src58.ximg exists
[Tue Jan 24 06:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src58.csv
[Tue Jan 24 06:19:09 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src58_1.ximg exists
[Tue Jan 24 06:19:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src58.csv
[Tue Jan 24 06:19:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 06:19:10 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Tue Jan 24 06:19:10 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Tue Jan 24 06:19:10 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Tue Jan 24 12:46:52 2012] Warning, spatial fit 58 centroid is now closest to src. 71
[Tue Jan 24 12:46:52 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:46:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:46:52 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 12:46:52 2012] Source does appear to be extended
[Tue Jan 24 12:46:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 12:48:14 2012] XMMSAS src. selection expression = ellipse(28961.432000, 28712.872000, 679.032020, 679.032020, 0.000000, X, Y)
[Tue Jan 24 12:48:14 2012] Writing source region out to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src73_src.reg
[Tue Jan 24 12:48:14 2012] Extracting stamp from image fullrun_pn_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (294, 292) - (372, 370)
[Tue Jan 24 12:48:14 2012] XMMSAS bgd. selection expression = annulus(28961.432000, 28712.872000, 1131.720033, 2263.440065, X, Y) && !ellipse(25530.608380, 25151.703200, 1427.298765, 1427.298765, 0.000000, X, Y) && !ellipse(28817.293600, 27170.317880, 1393.632040, 1393.632040, 0.000000, X, Y) && !ellipse(26616.298400, 26368.476600, 538.513615, 538.513615, 0.000000, X, Y) && !ellipse(27353.699200, 27417.879800, 5495.208158, 5495.208158, 0.000000, X, Y) && !ellipse(26915.796000, 27618.886000, 605.541617, 482.880014, 64.161000, X, Y) && !ellipse(30500.028137, 27765.679840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26418.656036, 27095.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28141.193909, 26499.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27367.214780, 28714.319200, 1239.712036, 859.960025, 38.743600, X, Y) && !ellipse(31575.649536, 31108.377655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26299.952332, 30544.760071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28455.803600, 30390.654400, 468.292813, 468.292813, 0.000000, X, Y) && !ellipse(28093.257355, 29687.873260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.643890, 29111.333649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26426.915400, 29119.820400, 409.036012, 409.036012, 0.000000, X, Y) && !ellipse(27943.112793, 28443.352173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28893.261000, 28293.922000, 1307.384038, 1307.384038, 0.000000, X, Y) && !ellipse(26330.617920, 28012.950684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.336000, 27668.604000, 1182.456034, 482.920814, 103.567700, X, Y) && !ellipse(29798.438000, 28017.049000, 1294.248037, 1294.248037, 0.000000, X, Y) && !ellipse(31830.008000, 27571.479800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(30326.134000, 26661.528000, 606.943217, 606.943217, 0.000000, X, Y)
[Tue Jan 24 12:48:14 2012] Writing fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src73.gif
[Tue Jan 24 14:34:44 2012] Mean detx,y = (1185.51, -1934.20) 
[Tue Jan 24 14:34:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 14:35:11 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 14:35:11 2012] Setting source spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Tue Jan 24 14:35:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed Jan 25 12:14:38 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:38 2012] Error reading totcts from fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Jan 25 12:14:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:44 2012] Using photon index=1.80, rate=0.0137, arf fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src73.arf
[Wed Jan 25 12:14:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:44 2012] Updating source flux to 3.4e-14
[Wed Jan 25 12:30:39 2012] Flag c found in src. 73 procflags, skipping spectral fitting