[Mon Jan 23 10:16:46 2012] Detection parameters: Position = (281.6, 244.0) = 0 42 57.82 41 11 5.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2373.9 +/- 59.4 Background counts = 50.3 Rate = 0.2 +/- 0.005 [Mon Jan 23 10:16:48 2012] Off-axis axis estimate = 4.13' [Mon Jan 23 10:20:59 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 10:20:59 2012] Initial guess for spatial extent in simple fitting = 8.49" [Mon Jan 23 10:20:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.831 [Mon Jan 23 10:20:59 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.49" [Mon Jan 23 16:04:51 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src31.ximg exists [Mon Jan 23 16:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src31.csv [Mon Jan 23 16:04:51 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src31_1.ximg exists [Mon Jan 23 16:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src31.csv [Mon Jan 23 16:04:51 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 23 16:04:53 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Mon Jan 23 16:04:53 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Mon Jan 23 16:04:53 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly [Mon Jan 23 23:43:37 2012] Spatial fit model total counts = 2946.880000, observed total counts = 2944.000000 [Mon Jan 23 23:43:37 2012] Offset between fit and detection position for source 35 = 0.047536 pixels [Mon Jan 23 23:43:37 2012] 2986.260000 total counts/ 1345.500000 bgd. counts: snr = 44.730444 Spatial fit parameters: Offset between fit and detection position for source 35 = 0.047536 pixels Position = (281.6, 244.1) = 0 42 57.82 41 11 4.8 Extent = 5.7 (5.4-5.9)", rotation angle = 0 Source counts = 1640.8 +/- 54.6 Background counts = 1345.5 Rate = 0.1 +/- 0.003 [Mon Jan 23 23:43:38 2012] Vigneting correction estimate = 1.000000 [Mon Jan 23 23:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 23 23:43:38 2012] Assessing source extent using major axis lower bound [Mon Jan 23 23:43:38 2012] Source does appear to be extended [Mon Jan 23 23:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 23 23:43:38 2012] Source is confused with source 111 [Mon Jan 23 23:44:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon Jan 23 23:44:31 2012] Initial guess for spatial extent in simple fitting = 5.69" [Mon Jan 23 23:44:31 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.917 [Mon Jan 23 23:44:31 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 5.69" [Tue Jan 24 06:19:08 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src28.ximg exists [Tue Jan 24 06:19:08 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src28_1.ximg exists [Tue Jan 24 06:19:08 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src28 appears to have run properly [Tue Jan 24 06:19:10 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Tue Jan 24 06:19:10 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Tue Jan 24 06:19:10 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly [Tue Jan 24 12:46:52 2012] Spatial fit model total counts = 2940.870000, observed total counts = 2944.000000 [Tue Jan 24 12:46:52 2012] Offset between fit and detection position for source 35 = 0.004715 pixels [Tue Jan 24 12:46:52 2012] 2954.580000 total counts/ 1314.690000 bgd. counts: snr = 45.227547 Spatial fit parameters: Offset between fit and detection position for source 35 = 0.004715 pixels Position = (281.6, 244.1) = 0 42 57.82 41 11 4.8 Extent = 5.7 (5.4-6.0)", rotation angle = 0 Source counts = 1639.9 +/- 54.4 Background counts = 1314.7 Rate = 0.1 +/- 0.003 [Tue Jan 24 12:46:52 2012] Vigneting correction estimate = 1.000000 [Tue Jan 24 12:46:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jan 24 12:46:52 2012] Assessing source extent using major axis lower bound [Tue Jan 24 12:46:52 2012] Source does appear to be extended [Tue Jan 24 12:46:52 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jan 24 12:48:12 2012] Counts = 1639.890000, rescaling region sizes by 2.000000 [Tue Jan 24 12:48:12 2012] XMMSAS src. selection expression = ellipse(24448.012000, 21185.873400, 684.781220, 684.781220, 0.000000, X, Y) [Tue Jan 24 12:48:12 2012] Writing source region out to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src35_src.reg [Tue Jan 24 12:48:12 2012] Extracting stamp from image fullrun_pn_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (242, 205) - (321, 283) [Tue Jan 24 12:48:12 2012] XMMSAS bgd. selection expression = annulus(24448.012000, 21185.873400, 2282.604066, 4565.208131, X, Y) && !ellipse(25530.608380, 25151.703200, 1427.298765, 1427.298765, 0.000000, X, Y) && !ellipse(27353.699200, 27417.879800, 5495.208158, 5495.208158, 0.000000, X, Y) && !ellipse(21595.160200, 25723.084600, 438.400813, 438.400813, 0.000000, X, Y) && !ellipse(20715.135376, 16655.211929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23353.931824, 26302.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28141.193909, 26499.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.666400, 21857.862600, 444.481613, 444.481613, 0.000000, X, Y) && !ellipse(27157.808400, 20630.227400, 431.779212, 431.779212, 0.000000, X, Y) && !ellipse(24403.865814, 26485.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23088.317383, 26492.930481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28598.169800, 25267.451000, 283.666408, 283.666408, 0.000000, X, Y) && !ellipse(27451.844000, 25049.440000, 1201.312035, 1201.312035, 0.000000, X, Y) && !ellipse(28073.904846, 24481.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.167236, 24521.475647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23852.996656, 24553.577739, 700.083391, 340.815488, 339.075359, X, Y) && !ellipse(27613.026276, 24071.628723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23690.156769, 23873.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28340.213400, 24036.768600, 423.804012, 423.804012, 0.000000, X, Y) && !ellipse(26226.912000, 23111.864000, 1181.272034, 1181.272034, 0.000000, X, Y) && !ellipse(22027.442000, 23269.972800, 342.724810, 342.724810, 0.000000, X, Y) && !ellipse(24580.000800, 21788.774000, 1293.272037, 355.507210, 290.754000, X, Y) && !ellipse(20487.024551, 21600.687210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23223.994690, 20139.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24105.012200, 20070.750200, 1636.048047, 354.731210, 106.630000, X, Y) && !ellipse(23871.150116, 19261.725876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23665.693329, 18481.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23602.185000, 18252.440000, 1592.520046, 1592.520046, 0.000000, X, Y) && !ellipse(23310.439789, 17183.671616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23080.750549, 16306.272049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22913.432400, 15966.972000, 1252.744036, 1252.744036, 0.000000, X, Y) [Tue Jan 24 12:48:12 2012] Writing fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src35.gif [Tue Jan 24 13:58:03 2012] Mean detx,y = (-1188.51, 6415.86) [Tue Jan 24 13:58:09 2012] Setting backscal keywords in source and bgd. spectrum [Tue Jan 24 13:58:48 2012] Binned source spectrum to 10 counts/bin [Tue Jan 24 13:58:49 2012] Setting source spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Tue Jan 24 13:58:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src35_bgd.pi.gz [Wed Jan 25 12:14:36 2012] Updating aperture counts using extracted products [Wed Jan 25 12:14:37 2012] Error reading totcts from fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Wed Jan 25 12:14:43 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 25 12:14:43 2012] Using photon index=1.80, rate=0.0973, arf fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src35.arf [Wed Jan 25 12:14:43 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 25 12:14:43 2012] Updating source flux to 3.2e-13 [Wed Jan 25 12:30:39 2012] Flag c found in src. 35 procflags, skipping spectral fitting