[Mon Jan 23 10:16:46 2012] Detection parameters: Position = (315.5, 251.9) = 0 42 44.73 41 11 38.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1966.5 +/- 55.1 Background counts = 72.3 Rate = 0.2 +/- 0.004 [Mon Jan 23 10:16:48 2012] Off-axis axis estimate = 3.60' [Mon Jan 23 10:20:59 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 10:20:59 2012] Initial guess for spatial extent in simple fitting = 8.23" [Mon Jan 23 10:20:59 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.093 [Mon Jan 23 10:20:59 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.23" [Mon Jan 23 16:04:51 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src30.ximg exists [Mon Jan 23 16:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src30.csv [Mon Jan 23 16:04:51 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src30_1.ximg exists [Mon Jan 23 16:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src30.csv [Mon Jan 23 16:04:51 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 23 16:04:53 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists [Mon Jan 23 16:04:53 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists [Mon Jan 23 16:04:53 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly [Mon Jan 23 23:43:37 2012] Source 34 is offset by -7.034281 and 6.283941 pixels which is larger than 2 X fitted extent = 0.947597 x 0.947597, not incorporating fit results [Mon Jan 23 23:43:38 2012] Vigneting correction estimate = 1.000000 [Mon Jan 23 23:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 23 23:43:38 2012] Assessing source extent using major [Mon Jan 23 23:43:38 2012] Source does appear to be extended [Mon Jan 23 23:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 23 23:44:31 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 23:44:31 2012] Initial guess for spatial extent in simple fitting = 8.23" [Mon Jan 23 23:44:31 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.093 [Mon Jan 23 23:44:31 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 8.23" [Tue Jan 24 06:19:08 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src27.ximg exists [Tue Jan 24 06:19:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src27.csv [Tue Jan 24 06:19:08 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src27_1.ximg exists [Tue Jan 24 06:19:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src27.csv [Tue Jan 24 06:19:08 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jan 24 06:19:10 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists [Tue Jan 24 06:19:10 2012] fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists [Tue Jan 24 06:19:10 2012] Fit fullrun_pn_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly [Tue Jan 24 12:46:52 2012] Spatial fit model total counts = 2666.800000, observed total counts = 2665.000000 [Tue Jan 24 12:46:52 2012] Offset between fit and detection position for source 34 = 0.102746 pixels [Tue Jan 24 12:46:52 2012] 2690.510000 total counts/ 1324.030000 bgd. counts: snr = 37.553841 Spatial fit parameters: Offset between fit and detection position for source 34 = 0.102746 pixels Position = (315.6, 251.8) = 0 42 44.70 41 11 38.4 Extent = 5.6 (5.3-5.8)", rotation angle = 0 Source counts = 1366.5 +/- 51.9 Background counts = 1324.0 Rate = 0.08 +/- 0.003 [Tue Jan 24 12:46:52 2012] Vigneting correction estimate = 1.000000 [Tue Jan 24 12:46:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jan 24 12:46:52 2012] Assessing source extent using major axis lower bound [Tue Jan 24 12:46:52 2012] Source does appear to be extended [Tue Jan 24 12:46:52 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jan 24 12:48:12 2012] Counts = 1366.480000, rescaling region sizes by 2.000000 [Tue Jan 24 12:48:12 2012] XMMSAS src. selection expression = ellipse(27409.666400, 21857.862600, 666.722419, 666.722419, 0.000000, X, Y) [Tue Jan 24 12:48:12 2012] Writing source region out to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src34_src.reg [Tue Jan 24 12:48:12 2012] Extracting stamp from image fullrun_pn_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (277, 213) - (354, 290) [Tue Jan 24 12:48:12 2012] XMMSAS bgd. selection expression = annulus(27409.666400, 21857.862600, 2222.408064, 4444.816128, X, Y) && !ellipse(25530.608380, 25151.703200, 1427.298765, 1427.298765, 0.000000, X, Y) && !ellipse(28817.293600, 27170.317880, 1393.632040, 1393.632040, 0.000000, X, Y) && !ellipse(26616.298400, 26368.476600, 538.513615, 538.513615, 0.000000, X, Y) && !ellipse(27353.699200, 27417.879800, 5495.208158, 5495.208158, 0.000000, X, Y) && !ellipse(25674.535400, 26696.622400, 400.104812, 400.104812, 0.000000, X, Y) && !ellipse(30327.634000, 23796.508000, 342.293760, 342.293760, 0.000000, X, Y) && !ellipse(23353.931824, 26302.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26418.656036, 27095.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28141.193909, 26499.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.000000, 26268.561920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31146.833099, 22833.100037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24448.012000, 21185.873400, 456.520813, 456.520813, 0.000000, X, Y) && !ellipse(27157.808400, 20630.227400, 431.779212, 431.779212, 0.000000, X, Y) && !ellipse(31166.343080, 19908.593400, 489.494414, 489.494414, 0.000000, X, Y) && !ellipse(31830.008000, 27571.479800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(30326.134000, 26661.528000, 606.943217, 606.943217, 0.000000, X, Y) && !ellipse(24403.865814, 26485.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23088.317383, 26492.930481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32103.100311, 26445.925842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32301.916870, 24833.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28598.169800, 25267.451000, 283.666408, 283.666408, 0.000000, X, Y) && !ellipse(27451.844000, 25049.440000, 1201.312035, 1201.312035, 0.000000, X, Y) && !ellipse(28073.904846, 24481.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.167236, 24521.475647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23852.996656, 24553.577739, 700.083391, 340.815488, 339.075359, X, Y) && !ellipse(30956.143585, 24479.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27613.026276, 24071.628723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23690.156769, 23873.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28340.213400, 24036.768600, 423.804012, 423.804012, 0.000000, X, Y) && !ellipse(26226.912000, 23111.864000, 1181.272034, 1181.272034, 0.000000, X, Y) && !ellipse(24580.000800, 21788.774000, 1293.272037, 355.507210, 290.754000, X, Y) && !ellipse(23223.994690, 20139.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24105.012200, 20070.750200, 1636.048047, 354.731210, 106.630000, X, Y) && !ellipse(23871.150116, 19261.725876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23665.693329, 18481.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23602.185000, 18252.440000, 1592.520046, 1592.520046, 0.000000, X, Y) && !ellipse(23310.439789, 17183.671616, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jan 24 12:48:12 2012] Writing fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src34.gif [Tue Jan 24 13:56:24 2012] Mean detx,y = (1463.74, 4953.71) [Tue Jan 24 13:56:28 2012] Setting backscal keywords in source and bgd. spectrum [Tue Jan 24 13:57:38 2012] Binned source spectrum to 10 counts/bin [Tue Jan 24 13:57:39 2012] Setting source spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src34_src_b10.pi.gz [Tue Jan 24 13:57:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src34_bgd.pi.gz [Wed Jan 25 12:14:36 2012] Updating aperture counts using extracted products [Wed Jan 25 12:14:36 2012] Error reading totcts from fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src34_src_b10.pi.gz [Wed Jan 25 12:14:43 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 25 12:14:43 2012] Using photon index=1.80, rate=0.0811, arf fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src34.arf [Wed Jan 25 12:14:43 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 25 12:14:43 2012] Updating source flux to 2.4e-13 [Wed Jan 25 12:30:39 2012] Flag b found in src. 34 procflags, skipping spectral fitting