[Mon Jan 23 10:16:46 2012] Detection parameters:
  Position = (269.0, 302.9) = 0 43 2.68 41 15 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1661.1 +/- 54.0
  Background counts = 79.8
  Rate = 0.1 +/- 0.003

[Mon Jan 23 10:16:48 2012] Off-axis axis estimate = 2.16'
[Mon Jan 23 10:20:59 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:20:59 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Mon Jan 23 10:20:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 4, frac = 0.202
[Mon Jan 23 10:20:59 2012] Skipping simple spatial due to low active detector fraction
[Mon Jan 23 23:43:38 2012] Source 14 is offset by -1.401220 and -3.028322 pixels which is larger than
2 X fitted extent = 1.727995 x 1.727995, not incorporating fit results
[Mon Jan 23 23:43:38 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:38 2012] Assessing source extent using major
[Mon Jan 23 23:43:38 2012] Source does appear to be extended
[Mon Jan 23 23:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:43:38 2012] Source is confused with source 91
[Mon Jan 23 23:44:31 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:44:31 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Mon Jan 23 23:44:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 4, frac = 0.202
[Mon Jan 23 23:44:31 2012] Skipping simple spatial due to low active detector fraction
[Tue Jan 24 12:46:52 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:46:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:46:52 2012] Assessing source extent using major
[Tue Jan 24 12:46:52 2012] Source does appear to be extended
[Tue Jan 24 12:46:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 12:48:10 2012] Counts = 1661.063477, rescaling region sizes by 2.000000
[Tue Jan 24 12:48:10 2012] XMMSAS src. selection expression = ellipse(23353.931824, 26302.163971, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jan 24 12:48:10 2012] Writing source region out to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src14_src.reg
[Tue Jan 24 12:48:10 2012] Extracting stamp from image fullrun_pn_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (194, 228) - (344, 378)
[Tue Jan 24 12:48:10 2012] XMMSAS bgd. selection expression = annulus(23353.931824, 26302.163971, 4350.000000, 8700.000000, X, Y) && !ellipse(25530.608380, 25151.703200, 1427.298765, 1427.298765, 0.000000, X, Y) && !ellipse(28817.293600, 27170.317880, 1393.632040, 1393.632040, 0.000000, X, Y) && !ellipse(26616.298400, 26368.476600, 538.513615, 538.513615, 0.000000, X, Y) && !ellipse(27353.699200, 27417.879800, 5495.208158, 5495.208158, 0.000000, X, Y) && !ellipse(25674.535400, 26696.622400, 400.104812, 400.104812, 0.000000, X, Y) && !ellipse(21595.160200, 25723.084600, 438.400813, 438.400813, 0.000000, X, Y) && !ellipse(26915.796000, 27618.886000, 605.541617, 482.880014, 64.161000, X, Y) && !ellipse(30500.028137, 27765.679840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30327.634000, 23796.508000, 342.293760, 342.293760, 0.000000, X, Y) && !ellipse(23124.607309, 29614.719815, 401.839350, 324.636610, 17.526987, X, Y) && !ellipse(15567.354400, 25576.459000, 492.705614, 492.705614, 0.000000, X, Y) && !ellipse(19740.828568, 32230.347900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30472.866340, 31465.517400, 471.392014, 399.396811, 17.418645, X, Y) && !ellipse(24073.552000, 31074.370200, 448.602413, 448.602413, 0.000000, X, Y) && !ellipse(26418.656036, 27095.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.849442, 27211.086193, 446.541001, 386.634918, 99.748143, X, Y) && !ellipse(28141.193909, 26499.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.000000, 26268.561920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32463.152400, 24173.722000, 411.871212, 354.822410, 111.132000, X, Y) && !ellipse(16227.951340, 23968.613586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31146.833099, 22833.100037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.666400, 21857.862600, 444.481613, 444.481613, 0.000000, X, Y) && !ellipse(24448.012000, 21185.873400, 456.520813, 456.520813, 0.000000, X, Y) && !ellipse(16640.138000, 20740.348862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27157.808400, 20630.227400, 431.779212, 431.779212, 0.000000, X, Y) && !ellipse(31166.343080, 19908.593400, 489.494414, 489.494414, 0.000000, X, Y) && !ellipse(17394.986800, 17258.691400, 670.107219, 339.095210, 49.008826, X, Y) && !ellipse(23244.089400, 33532.539800, 442.617698, 442.617698, 0.000000, X, Y) && !ellipse(27367.214780, 28714.319200, 1239.712036, 859.960025, 38.743600, X, Y) && !ellipse(28134.974780, 33190.804800, 419.915239, 419.915239, 0.000000, X, Y) && !ellipse(29589.809753, 31971.193146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22478.327057, 30974.017242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31575.649536, 31108.377655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26299.952332, 30544.760071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28455.803600, 30390.654400, 468.292813, 468.292813, 0.000000, X, Y) && !ellipse(24919.542000, 30203.962000, 304.341609, 304.341609, 0.000000, X, Y) && !ellipse(17691.342422, 30120.223541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28093.257355, 29687.873260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19235.406570, 29337.985535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.643890, 29111.333649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28961.432000, 28712.872000, 905.376026, 905.376026, 0.000000, X, Y) && !ellipse(26426.915400, 29119.820400, 409.036012, 409.036012, 0.000000, X, Y) && !ellipse(27943.112793, 28443.352173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28893.261000, 28293.922000, 1307.384038, 1307.384038, 0.000000, X, Y) && !ellipse(26330.617920, 28012.950684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.336000, 27668.604000, 1182.456034, 482.920814, 103.567700, X, Y) && !ellipse(25111.362091, 28079.188354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29798.438000, 28017.049000, 1294.248037, 1294.248037, 0.000000, X, Y) && !ellipse(31830.008000, 27571.479800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(24922.852356, 27279.522736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.966000, 27704.480000, 1233.744036, 1233.744036, 0.000000, X, Y) && !ellipse(30326.134000, 26661.528000, 606.943217, 606.943217, 0.000000, X, Y) && !ellipse(24403.865814, 26485.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23088.317383, 26492.930481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32103.100311, 26445.925842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32301.916870, 24833.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28598.169800, 25267.451000, 283.666408, 283.666408, 0.000000, X, Y) && !ellipse(27451.844000, 25049.440000, 1201.312035, 1201.312035, 0.000000, X, Y) && !ellipse(28073.904846, 24481.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.167236, 24521.475647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23852.996656, 24553.577739, 700.083391, 340.815488, 339.075359, X, Y) && !ellipse(30956.143585, 24479.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27613.026276, 24071.628723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23690.156769, 23873.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28340.213400, 24036.768600, 423.804012, 423.804012, 0.000000, X, Y) && !ellipse(26226.912000, 23111.864000, 1181.272034, 1181.272034, 0.000000, X, Y) && !ellipse(22027.442000, 23269.972800, 342.724810, 342.724810, 0.000000, X, Y) && !ellipse(14066.109665, 22908.632965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24580.000800, 21788.774000, 1293.272037, 355.507210, 290.754000, X, Y) && !ellipse(20487.024551, 21600.687210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23223.994690, 20139.636536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24105.012200, 20070.750200, 1636.048047, 354.731210, 106.630000, X, Y) && !ellipse(23871.150116, 19261.725876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23665.693329, 18481.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23602.185000, 18252.440000, 1592.520046, 1592.520046, 0.000000, X, Y) && !ellipse(23310.439789, 17183.671616, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 12:48:10 2012] Writing fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src14.gif
[Tue Jan 24 13:24:34 2012] Mean detx,y = (-3402.94, 1523.96) 
[Tue Jan 24 13:24:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 13:27:33 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 13:27:33 2012] Setting source spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jan 24 13:27:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Jan 25 02:29:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 02:29:21 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:35 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:36 2012] Error reading totcts from fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jan 25 12:14:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:42 2012] Using photon index=1.80, rate=0.0985, arf fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src14.arf
[Wed Jan 25 12:14:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:42 2012] Updating source flux to 2.7e-13
[Wed Jan 25 12:30:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting