[Mon Jan 23 10:16:46 2012] Detection parameters:
  Position = (348.7, 273.6) = 0 42 31.95 41 13 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2602.0 +/- 61.3
  Background counts = 93.6
  Rate = 0.3 +/- 0.006

[Mon Jan 23 10:16:48 2012] Off-axis axis estimate = 4.06'
[Mon Jan 23 10:20:59 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:20:59 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Mon Jan 23 10:20:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 9, frac = 0.376
[Mon Jan 23 10:20:59 2012] Skipping simple spatial due to low active detector fraction
[Mon Jan 23 23:43:38 2012] Spatial fit model total counts = 1745.220000, observed total counts = 1745.000000
[Mon Jan 23 23:43:38 2012] Offset between fit and detection position for source 10 = 1.657784 pixels
[Mon Jan 23 23:43:38 2012] Warning, changing simple spatial fit ID from -1 to 93
[Mon Jan 23 23:43:38 2012] 1753.000000 total counts/ 1329.240000 bgd. counts: snr = 11.623001
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.657784 pixels
  Position = (349.4, 275.1) = 0 42 31.66 41 13 19.6
  Extent = 3.4 (3.1-3.6)", rotation angle = 0
  Source counts = 423.8 +/- 41.9
  Background counts = 1329.2
  Rate = 0.03 +/- 0.002
[Mon Jan 23 23:43:38 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:38 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:43:38 2012] Source does appear to be extended
[Mon Jan 23 23:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:44:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:44:31 2012] Initial guess for spatial extent in simple fitting = 3.40"
[Mon Jan 23 23:44:31 2012] source mask rpix=0.8, npix_max = 6, mask sum = 3, frac = 0.456
[Mon Jan 23 23:44:31 2012] Skipping simple spatial due to low active detector fraction
[Tue Jan 24 12:46:52 2012] Spatial fit model total counts = 2452.320000, observed total counts = 2460.000000
[Tue Jan 24 12:46:52 2012] Offset between fit and detection position for source 10 = 1.038827 pixels
[Tue Jan 24 12:46:52 2012] Warning, changing simple spatial fit ID from -1 to 79
[Tue Jan 24 12:46:52 2012] 2456.480000 total counts/ 1353.070000 bgd. counts: snr = 29.996928
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.038827 pixels
  Position = (349.2, 274.1) = 0 42 31.77 41 13 15.2
  Extent = 4.3 (4.0-4.5)", rotation angle = 0
  Source counts = 1103.4 +/- 49.6
  Background counts = 1353.1
  Rate = 0.07 +/- 0.003
[Tue Jan 24 12:46:52 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:46:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:46:52 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 12:46:52 2012] Source does appear to be extended
[Tue Jan 24 12:46:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 12:48:10 2012] Counts = 1103.410000, rescaling region sizes by 2.000000
[Tue Jan 24 12:48:10 2012] XMMSAS src. selection expression = ellipse(30327.634000, 23796.508000, 513.440640, 513.440640, 0.000000, X, Y)
[Tue Jan 24 12:48:10 2012] Writing source region out to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src10_src.reg
[Tue Jan 24 12:48:10 2012] Extracting stamp from image fullrun_pn_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (320, 245) - (379, 304)
[Tue Jan 24 12:48:10 2012] XMMSAS bgd. selection expression = annulus(30327.634000, 23796.508000, 1711.468799, 3422.937598, X, Y) && !ellipse(25530.608380, 25151.703200, 1427.298765, 1427.298765, 0.000000, X, Y) && !ellipse(28817.293600, 27170.317880, 1393.632040, 1393.632040, 0.000000, X, Y) && !ellipse(26616.298400, 26368.476600, 538.513615, 538.513615, 0.000000, X, Y) && !ellipse(27353.699200, 27417.879800, 5495.208158, 5495.208158, 0.000000, X, Y) && !ellipse(26915.796000, 27618.886000, 605.541617, 482.880014, 64.161000, X, Y) && !ellipse(30500.028137, 27765.679840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33392.861800, 22788.704200, 390.891211, 390.891211, 0.000000, X, Y) && !ellipse(26418.656036, 27095.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32682.418000, 27100.384000, 503.720014, 402.474412, 344.619700, X, Y) && !ellipse(28141.193909, 26499.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.000000, 26268.561920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33323.454600, 24735.717000, 418.349612, 418.349612, 0.000000, X, Y) && !ellipse(32463.152400, 24173.722000, 411.871212, 354.822410, 111.132000, X, Y) && !ellipse(31146.833099, 22833.100037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.666400, 21857.862600, 444.481613, 444.481613, 0.000000, X, Y) && !ellipse(27157.808400, 20630.227400, 431.779212, 431.779212, 0.000000, X, Y) && !ellipse(31166.343080, 19908.593400, 489.494414, 489.494414, 0.000000, X, Y) && !ellipse(28893.261000, 28293.922000, 1307.384038, 1307.384038, 0.000000, X, Y) && !ellipse(26330.617920, 28012.950684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29798.438000, 28017.049000, 1294.248037, 1294.248037, 0.000000, X, Y) && !ellipse(31830.008000, 27571.479800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(30326.134000, 26661.528000, 606.943217, 606.943217, 0.000000, X, Y) && !ellipse(32103.100311, 26445.925842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32301.916870, 24833.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28598.169800, 25267.451000, 283.666408, 283.666408, 0.000000, X, Y) && !ellipse(27451.844000, 25049.440000, 1201.312035, 1201.312035, 0.000000, X, Y) && !ellipse(28073.904846, 24481.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.167236, 24521.475647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30956.143585, 24479.555389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27613.026276, 24071.628723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28340.213400, 24036.768600, 423.804012, 423.804012, 0.000000, X, Y) && !ellipse(26226.912000, 23111.864000, 1181.272034, 1181.272034, 0.000000, X, Y) && !ellipse(34317.554047, 22911.888031, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 12:48:10 2012] Writing fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src10.gif
[Tue Jan 24 13:18:13 2012] Mean detx,y = (3787.31, 2340.70) 
[Tue Jan 24 13:18:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 13:19:12 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 13:19:13 2012] Setting source spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jan 24 13:19:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jan 25 12:14:35 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:35 2012] Error reading totcts from fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jan 25 12:14:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:41 2012] Using photon index=1.80, rate=0.0655, arf fullrun_pn_xmm0600660201_pi300-10000_pass1_cl_src10.arf
[Wed Jan 25 12:14:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:41 2012] Updating source flux to 1.9e-13