[Mon Jan 23 10:18:22 2012] Detection parameters:
  Position = (304.8, 275.8) = 0 42 48.86 41 13 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.5 +/- 14.4
  Background counts = 33.7
  Rate = 0.004 +/- 0.0009

[Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 1.71'
[Mon Jan 23 19:45:19 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Jan 23 19:45:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 11, frac = 0.582
[Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 7.28"
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src75.ximg exists
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src75_1.ximg exists
[Mon Jan 23 23:43:14 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src75 appears to have run properly
[Mon Jan 23 23:43:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Mon Jan 23 23:43:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src75.csv
[Mon Jan 23 23:43:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Mon Jan 23 23:43:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src75.csv
[Mon Jan 23 23:43:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:44:09 2012] Warning, spatial fit 75 centroid is now closest to src. 75
[Mon Jan 23 23:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:44:09 2012] Assessing source extent using major
[Mon Jan 23 23:44:09 2012] Source does appear to be extended
[Mon Jan 23 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:00:18 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:00:18 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jan 24 09:00:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 11, frac = 0.582
[Tue Jan 24 09:00:18 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 7.28"
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src70.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src70.csv
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src70_1.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src70.csv
[Tue Jan 24 12:46:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Tue Jan 24 12:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Tue Jan 24 12:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Tue Jan 24 12:46:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:47:36 2012] Source 85 is offset by 7.468890 and 4.653760 pixels which is larger than
2 X fitted extent = 6.696368 x 6.696368, not incorporating fit results
[Tue Jan 24 12:47:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:36 2012] Assessing source extent using major
[Tue Jan 24 12:47:36 2012] Source does appear to be extended
[Tue Jan 24 12:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:46:39 2012] XMMSAS src. selection expression = ellipse(26469.433472, 23942.865112, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:46:39 2012] Writing source region out to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src85_src.reg
[Wed Jan 25 08:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (267, 238) - (342, 313)
[Wed Jan 25 08:46:39 2012] XMMSAS bgd. selection expression = annulus(26469.433472, 23942.865112, 1087.500000, 2175.000000, X, Y) && !ellipse(25510.936480, 25142.339000, 1736.584850, 1736.584850, 0.000000, X, Y) && !ellipse(26617.121680, 26367.188289, 637.251306, 371.897969, 123.369917, X, Y) && !ellipse(25841.830000, 26703.434000, 629.366418, 629.366418, 0.000000, X, Y) && !ellipse(27409.763800, 21848.882000, 412.724012, 412.724012, 0.000000, X, Y) && !ellipse(28194.403351, 26403.148010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.703200, 25577.447800, 377.632811, 291.529608, 60.804154, X, Y) && !ellipse(24469.585754, 21416.238342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28625.570200, 25242.550000, 330.686410, 330.686410, 0.000000, X, Y) && !ellipse(24366.100677, 26479.742950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28365.297200, 24025.032200, 314.758409, 314.758409, 0.000000, X, Y) && !ellipse(26942.957947, 25707.155975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.435028, 22129.364609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23645.655823, 24561.064789, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:46:39 2012] Writing fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src85.gif
[Wed Jan 25 09:17:52 2012] Mean detx,y = (253.38, -3297.27) 
[Wed Jan 25 09:17:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 09:18:00 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 09:18:00 2012] Setting source spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed Jan 25 09:18:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Wed Jan 25 11:55:15 2012] Not generating rmf since there are only 71 counts
[Wed Jan 25 11:55:15 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:59 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:59 2012] Error reading totcts from fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed Jan 25 12:15:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:15:03 2012] Using photon index=1.80, rate=0.00434, arf fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src85.arf
[Wed Jan 25 12:15:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:15:03 2012] Updating source flux to 4.3e-14
[Wed Jan 25 12:22:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting