[Mon Jan 23 10:18:21 2012] Detection parameters:
  Position = (356.0, 281.4) = 0 42 29.14 41 13 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.5 +/- 14.4
  Background counts = 30.4
  Rate = 0.005 +/- 0.0009

[Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 4.35'
[Mon Jan 23 19:45:19 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Mon Jan 23 19:45:19 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 8.60"
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src71.ximg exists
[Mon Jan 23 23:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src71.csv
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src71_1.ximg exists
[Mon Jan 23 23:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src71.csv
[Mon Jan 23 23:43:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:43:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Mon Jan 23 23:43:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Mon Jan 23 23:43:16 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Mon Jan 23 23:44:09 2012] Spatial fit model total counts = 701.983000, observed total counts = 702.000000
[Mon Jan 23 23:44:09 2012] Offset between fit and detection position for source 82 = 8.285338 pixels
[Mon Jan 23 23:44:09 2012] Warning, changing simple spatial fit ID from 71 to 70
[Mon Jan 23 23:44:09 2012] 630.959600 total counts/ 560.901000 bgd. counts: snr = 2.958137
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 8.285338 pixels
  Position = (359.0, 273.7) = 0 42 27.96 41 13 13.4
  Extent = 18.0 (17.4-36.0)", rotation angle = 0
  Source counts = 70.1 +/- 25.1
  Background counts = 560.9
  Rate = 0.004 +/- 0.001
[Mon Jan 23 23:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:44:09 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:44:09 2012] Source does appear to be extended
[Mon Jan 23 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:44:09 2012] Source is confused with source 33
[Tue Jan 24 09:00:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:00:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 09:00:18 2012] Initial guess for spatial extent in simple fitting = 18.00"
[Tue Jan 24 09:00:18 2012] source mask rpix=4.1, npix_max = 86, mask sum = 90, frac = 1.046
[Tue Jan 24 09:00:18 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 18.00"
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src67.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src67.csv
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src67_1.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src67.csv
[Tue Jan 24 12:46:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Tue Jan 24 12:46:17 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Tue Jan 24 12:47:36 2012] Warning, spatial fit 67 centroid is now closest to src. 83
[Tue Jan 24 12:47:36 2012] Source 82 is offset by 2.861011 and -4.929011 pixels which is larger than
2 X fitted extent = 3.429154 x 3.429154, not incorporating fit results
[Tue Jan 24 12:47:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:36 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 12:47:36 2012] Source does appear to be extended
[Tue Jan 24 12:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:46:39 2012] XMMSAS src. selection expression = ellipse(31187.146000, 23759.730000, 1080.258031, 1080.258031, 0.000000, X, Y)
[Wed Jan 25 08:46:39 2012] Writing source region out to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src82_src.reg
[Wed Jan 25 08:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (297, 212) - (421, 336)
[Wed Jan 25 08:46:39 2012] XMMSAS bgd. selection expression = annulus(31187.146000, 23759.730000, 1800.430052, 3600.860104, X, Y) && !ellipse(28833.408000, 27670.262000, 1301.632037, 1301.632037, 0.000000, X, Y) && !ellipse(32350.808200, 26590.474000, 382.536011, 382.536011, 0.000000, X, Y) && !ellipse(26950.211000, 27556.557200, 830.368024, 483.413614, 54.456109, X, Y) && !ellipse(27376.498000, 27413.732600, 1169.656034, 1169.656034, 0.000000, X, Y) && !ellipse(30498.258176, 27516.860419, 434.194702, 382.310649, 15.716830, X, Y) && !ellipse(30286.067600, 23772.116400, 441.318413, 441.318413, 0.000000, X, Y) && !ellipse(33387.908000, 22751.975200, 465.942413, 465.942413, 0.000000, X, Y) && !ellipse(33321.363526, 24716.285606, 386.732074, 312.167311, 79.150843, X, Y) && !ellipse(27409.763800, 21848.882000, 412.724012, 412.724012, 0.000000, X, Y) && !ellipse(34123.040960, 23010.432600, 339.523210, 339.523210, 0.000000, X, Y) && !ellipse(31160.691903, 19903.344869, 430.651940, 307.035462, 351.685481, X, Y) && !ellipse(32699.510162, 27088.628784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31138.361400, 22735.595600, 370.680011, 370.680011, 0.000000, X, Y) && !ellipse(28194.403351, 26403.148010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.703200, 25577.447800, 377.632811, 291.529608, 60.804154, X, Y) && !ellipse(28625.570200, 25242.550000, 330.686410, 330.686410, 0.000000, X, Y) && !ellipse(29861.655160, 27475.681000, 396.196811, 396.196811, 0.000000, X, Y) && !ellipse(34851.645220, 20884.930600, 359.836010, 359.836010, 0.000000, X, Y) && !ellipse(28365.297200, 24025.032200, 314.758409, 314.758409, 0.000000, X, Y) && !ellipse(26942.957947, 25707.155975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31891.460000, 24301.054000, 360.086410, 360.086410, 0.000000, X, Y) && !ellipse(26799.435028, 22129.364609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34822.556549, 28050.219330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29302.132019, 28219.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30229.170000, 25413.114000, 1276.768037, 1276.768037, 0.000000, X, Y)
[Wed Jan 25 08:46:39 2012] Writing fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src82.gif
[Wed Jan 25 09:15:54 2012] Mean detx,y = (-4081.63, -2412.68) 
[Wed Jan 25 09:15:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 09:16:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 09:16:35 2012] Setting source spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Wed Jan 25 09:16:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Wed Jan 25 11:54:42 2012] Not generating rmf since there are only 70 counts
[Wed Jan 25 11:54:42 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:59 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:59 2012] Error reading totcts from fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Wed Jan 25 12:15:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:15:03 2012] Using photon index=1.80, rate=0.0038, arf fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src82.arf
[Wed Jan 25 12:15:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:15:03 2012] Updating source flux to 4.2e-14
[Wed Jan 25 12:22:43 2012] Flag b found in src. 82 procflags, skipping spectral fitting
[Wed Jan 25 12:22:43 2012] Flag c found in src. 82 procflags, skipping spectral fitting
[Wed Jan 25 12:22:43 2012] Source 82 has fewer than 100.000000 counts, skipping spectral fitting