[Mon Jan 23 10:18:21 2012] Detection parameters:
  Position = (280.6, 304.9) = 0 42 58.19 41 15 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.4 +/- 20.5
  Background counts = 33.0
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 1.37'
[Mon Jan 23 19:45:19 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Mon Jan 23 19:45:19 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 7.12"
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src57.ximg exists
[Mon Jan 23 23:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src57.csv
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src57_1.ximg exists
[Mon Jan 23 23:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src57.csv
[Mon Jan 23 23:43:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Mon Jan 23 23:43:15 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Mon Jan 23 23:44:09 2012] Warning, spatial fit 57 centroid is now closest to src. 24
[Mon Jan 23 23:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:44:09 2012] Assessing source extent using major
[Mon Jan 23 23:44:09 2012] Source does appear to be extended
[Mon Jan 23 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:00:18 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:00:18 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Tue Jan 24 09:00:18 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Tue Jan 24 09:00:18 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 7.12"
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src54.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src54.csv
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src54.csv
[Tue Jan 24 12:46:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Jan 24 12:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src54.csv
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Jan 24 12:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src54.csv
[Tue Jan 24 12:46:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:47:36 2012] Spatial fit model total counts = 911.223000, observed total counts = 1615.000000
[Tue Jan 24 12:47:36 2012] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jan 24 12:47:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:36 2012] Assessing source extent using major
[Tue Jan 24 12:47:36 2012] Source does appear to be extended
[Tue Jan 24 12:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:46:39 2012] XMMSAS src. selection expression = ellipse(24366.100677, 26479.742950, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:46:39 2012] Writing source region out to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src73_src.reg
[Wed Jan 25 08:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (243, 267) - (318, 342)
[Wed Jan 25 08:46:39 2012] XMMSAS bgd. selection expression = annulus(24366.100677, 26479.742950, 1087.500000, 2175.000000, X, Y) && !ellipse(25510.936480, 25142.339000, 1736.584850, 1736.584850, 0.000000, X, Y) && !ellipse(26617.121680, 26367.188289, 637.251306, 371.897969, 123.369917, X, Y) && !ellipse(26950.211000, 27556.557200, 830.368024, 483.413614, 54.456109, X, Y) && !ellipse(23291.702404, 26402.246974, 496.970329, 376.042079, 229.733111, X, Y) && !ellipse(27376.498000, 27413.732600, 1169.656034, 1169.656034, 0.000000, X, Y) && !ellipse(25134.295600, 27160.664000, 344.298410, 344.298410, 0.000000, X, Y) && !ellipse(24024.026816, 27209.900405, 370.196407, 344.835509, 342.006138, X, Y) && !ellipse(25841.830000, 26703.434000, 629.366418, 629.366418, 0.000000, X, Y) && !ellipse(26447.410004, 27103.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25713.730960, 28077.116200, 278.093608, 278.093608, 0.000000, X, Y) && !ellipse(26942.957947, 25707.155975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26469.433472, 23942.865112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23645.655823, 24561.064789, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 08:46:39 2012] Writing fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src73.gif
[Wed Jan 25 09:13:18 2012] Mean detx,y = (2814.99, -1482.73) 
[Wed Jan 25 09:13:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 09:13:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 09:13:28 2012] Setting source spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Jan 25 09:13:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed Jan 25 11:53:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 11:53:55 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:58 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:58 2012] Error reading totcts from fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Jan 25 12:15:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:15:02 2012] Using photon index=1.80, rate=0.00993, arf fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src73.arf
[Wed Jan 25 12:15:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:15:02 2012] Updating source flux to 1e-13
[Wed Jan 25 12:22:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting