[Mon Jan 23 10:18:21 2012] Detection parameters:
  Position = (337.4, 324.9) = 0 42 36.30 41 16 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.8 +/- 14.3
  Background counts = 30.3
  Rate = 0.004 +/- 0.0008

[Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 3.41'
[Mon Jan 23 19:45:19 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Mon Jan 23 19:45:19 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.890
[Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 8.14"
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src77.ximg exists
[Mon Jan 23 23:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src77.csv
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src77_1.ximg exists
[Mon Jan 23 23:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src77.csv
[Mon Jan 23 23:43:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:43:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Mon Jan 23 23:43:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Mon Jan 23 23:43:16 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Mon Jan 23 23:44:09 2012] Source 69 is offset by -1.764069 and 3.788177 pixels which is larger than
2 X fitted extent = 0.890956 x 0.890956, not incorporating fit results
[Mon Jan 23 23:44:09 2012] Warning, spatial fit 77 centroid is now closest to src. 4
[Mon Jan 23 23:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:44:09 2012] Assessing source extent using major
[Mon Jan 23 23:44:09 2012] Source does appear to be extended
[Mon Jan 23 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:44:09 2012] Source is confused with source 4
[Tue Jan 24 09:00:18 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:00:18 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Tue Jan 24 09:00:18 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.890
[Tue Jan 24 09:00:18 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 8.14"
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src71.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src71.csv
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src71_1.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src71.csv
[Tue Jan 24 12:46:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Tue Jan 24 12:46:17 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Tue Jan 24 12:47:36 2012] Warning, spatial fit 71 centroid is now closest to src. 4
[Tue Jan 24 12:47:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:36 2012] Assessing source extent using major
[Tue Jan 24 12:47:36 2012] Source does appear to be extended
[Tue Jan 24 12:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:46:39 2012] XMMSAS src. selection expression = ellipse(29302.132019, 28219.177429, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:46:39 2012] Writing source region out to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src69_src.reg
[Wed Jan 25 08:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (300, 287) - (375, 362)
[Wed Jan 25 08:46:40 2012] XMMSAS bgd. selection expression = annulus(29302.132019, 28219.177429, 1087.500000, 2175.000000, X, Y) && !ellipse(25510.936480, 25142.339000, 1736.584850, 1736.584850, 0.000000, X, Y) && !ellipse(28833.408000, 27670.262000, 1301.632037, 1301.632037, 0.000000, X, Y) && !ellipse(26617.121680, 26367.188289, 637.251306, 371.897969, 123.369917, X, Y) && !ellipse(26950.211000, 27556.557200, 830.368024, 483.413614, 54.456109, X, Y) && !ellipse(27376.498000, 27413.732600, 1169.656034, 1169.656034, 0.000000, X, Y) && !ellipse(30498.258176, 27516.860419, 434.194702, 382.310649, 15.716830, X, Y) && !ellipse(26447.410004, 27103.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28194.403351, 26403.148010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28457.258400, 30391.831000, 364.481610, 364.481610, 0.000000, X, Y) && !ellipse(27341.337200, 28726.973000, 219.270406, 219.270406, 0.000000, X, Y) && !ellipse(29861.655160, 27475.681000, 396.196811, 396.196811, 0.000000, X, Y) && !ellipse(26426.459167, 29687.411285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26942.957947, 25707.155975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30229.170000, 25413.114000, 1276.768037, 1276.768037, 0.000000, X, Y) && !ellipse(28498.002000, 29457.738000, 1266.752036, 1266.752036, 0.000000, X, Y)
[Wed Jan 25 08:46:40 2012] Writing fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src69.gif
[Wed Jan 25 09:18:02 2012] Mean detx,y = (-1385.59, 1419.29) 
[Wed Jan 25 09:18:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 09:18:12 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 09:18:12 2012] Setting source spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Jan 25 09:18:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Wed Jan 25 11:55:17 2012] Not generating rmf since there are only 69 counts
[Wed Jan 25 11:55:17 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:59 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:15:00 2012] Error reading totcts from fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Jan 25 12:15:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:15:03 2012] Using photon index=1.80, rate=0.00411, arf fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src69.arf
[Wed Jan 25 12:15:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:15:03 2012] Updating source flux to 4.1e-14
[Wed Jan 25 12:22:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting