[Mon Jan 23 10:18:21 2012] Detection parameters:
  Position = (304.3, 341.8) = 0 42 49.05 41 18 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.4 +/- 20.1
  Background counts = 23.7
  Rate = 0.01 +/- 0.002

[Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 3.17'
[Mon Jan 23 19:45:19 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Mon Jan 23 19:45:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.683
[Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.01"
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src53.ximg exists
[Mon Jan 23 23:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src53.csv
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src53_1.ximg exists
[Mon Jan 23 23:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src53.csv
[Mon Jan 23 23:43:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Mon Jan 23 23:43:15 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Mon Jan 23 23:44:09 2012] Warning, spatial fit 53 centroid is now closest to src. 58
[Mon Jan 23 23:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:44:09 2012] Assessing source extent using major
[Mon Jan 23 23:44:09 2012] Source does appear to be extended
[Mon Jan 23 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:44:09 2012] Source is confused with source 63
[Tue Jan 24 09:00:18 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:00:18 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Tue Jan 24 09:00:18 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.683
[Tue Jan 24 09:00:18 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 8.01"
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src51.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src51.csv
[Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src51_1.ximg exists
[Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src51.csv
[Tue Jan 24 12:46:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Tue Jan 24 12:46:17 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Tue Jan 24 12:47:36 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 12.651199 pixels away
[Tue Jan 24 12:47:36 2012] Source 60 is offset by -4.184262 and 2.297946 pixels which is larger than
2 X fitted extent = 0.436766 x 0.436766, not incorporating fit results
[Tue Jan 24 12:47:36 2012] Warning, spatial fit 51 centroid is now closest to src. 58
[Tue Jan 24 12:47:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:36 2012] Assessing source extent using major
[Tue Jan 24 12:47:36 2012] Source does appear to be extended
[Tue Jan 24 12:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:46:39 2012] XMMSAS src. selection expression = ellipse(26426.459167, 29687.411285, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:46:39 2012] Writing source region out to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src60_src.reg
[Wed Jan 25 08:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (267, 304) - (342, 379)
[Wed Jan 25 08:46:39 2012] XMMSAS bgd. selection expression = annulus(26426.459167, 29687.411285, 1087.500000, 2175.000000, X, Y) && !ellipse(28833.408000, 27670.262000, 1301.632037, 1301.632037, 0.000000, X, Y) && !ellipse(26950.211000, 27556.557200, 830.368024, 483.413614, 54.456109, X, Y) && !ellipse(27376.498000, 27413.732600, 1169.656034, 1169.656034, 0.000000, X, Y) && !ellipse(25686.029700, 30573.437200, 394.125611, 394.125611, 0.000000, X, Y) && !ellipse(24067.846840, 31082.397600, 420.195212, 364.448010, 0.000000, X, Y) && !ellipse(24024.026816, 27209.900405, 370.196407, 344.835509, 342.006138, X, Y) && !ellipse(26447.410004, 27103.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28457.258400, 30391.831000, 364.481610, 364.481610, 0.000000, X, Y) && !ellipse(27341.337200, 28726.973000, 219.270406, 219.270406, 0.000000, X, Y) && !ellipse(26454.080200, 29132.072200, 303.989609, 303.989609, 0.000000, X, Y) && !ellipse(25713.730960, 28077.116200, 278.093608, 278.093608, 0.000000, X, Y) && !ellipse(25087.804016, 30235.749176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29302.132019, 28219.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.002000, 29457.738000, 1266.752036, 1266.752036, 0.000000, X, Y)
[Wed Jan 25 08:46:39 2012] Writing fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src60.gif
[Wed Jan 25 09:12:42 2012] Mean detx,y = (1736.10, 2047.22) 
[Wed Jan 25 09:12:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 09:12:51 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 09:12:51 2012] Setting source spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Jan 25 09:12:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Wed Jan 25 11:53:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 11:53:48 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:57 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:58 2012] Error reading totcts from fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Jan 25 12:15:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:15:02 2012] Using photon index=1.80, rate=0.0117, arf fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src60.arf
[Wed Jan 25 12:15:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:15:02 2012] Updating source flux to 1.2e-13
[Wed Jan 25 12:22:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting