[Mon Jan 23 10:18:21 2012] Detection parameters: Position = (288.9, 348.1) = 0 42 54.99 41 18 36.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 163.8 +/- 18.4 Background counts = 25.9 Rate = 0.01 +/- 0.001 [Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 3.67' [Mon Jan 23 19:45:19 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 8.26" [Mon Jan 23 19:45:19 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.695 [Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 8.26" [Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src56.ximg exists [Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src56_1.ximg exists [Mon Jan 23 23:43:14 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src56 appears to have run properly [Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists [Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists [Mon Jan 23 23:43:15 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly [Mon Jan 23 23:44:09 2012] Source 58 is offset by -7.974437 and -2.274883 pixels which is larger than 2 X fitted extent = 2.384207 x 2.384207, not incorporating fit results [Mon Jan 23 23:44:09 2012] Source 58 is offset by -7.368207 and -3.861458 pixels which is larger than 2 X fitted extent = 2.687499 x 2.687499, not incorporating fit results [Mon Jan 23 23:44:09 2012] Vigneting correction estimate = 1.000000 [Mon Jan 23 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 23 23:44:09 2012] Assessing source extent using major [Mon Jan 23 23:44:09 2012] Source does appear to be extended [Mon Jan 23 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jan 24 09:00:18 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting [Tue Jan 24 09:00:18 2012] Initial guess for spatial extent in simple fitting = 8.26" [Tue Jan 24 09:00:18 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.695 [Tue Jan 24 09:00:18 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 8.26" [Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src53.ximg exists [Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src53.csv [Tue Jan 24 12:46:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src53_1.ximg exists [Tue Jan 24 12:46:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src53.csv [Tue Jan 24 12:46:15 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src53_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists [Tue Jan 24 12:46:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src53.csv [Tue Jan 24 12:46:17 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists [Tue Jan 24 12:46:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src53.csv [Tue Jan 24 12:46:17 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jan 24 12:47:36 2012] Source 58 is offset by -7.999931 and -2.274883 pixels which is larger than 2 X fitted extent = 2.397021 x 2.397021, not incorporating fit results [Tue Jan 24 12:47:36 2012] Spatial fit model total counts = -21.746300, observed total counts = 1499.000000 [Tue Jan 24 12:47:36 2012] Poor agreement between spatial fit and data for source 58 It may help to tweak spatial fit manually Not incorporating fit results [Tue Jan 24 12:47:36 2012] Vigneting correction estimate = 1.000000 [Tue Jan 24 12:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jan 24 12:47:36 2012] Assessing source extent using major [Tue Jan 24 12:47:36 2012] Source does appear to be extended [Tue Jan 24 12:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jan 25 08:46:39 2012] XMMSAS src. selection expression = ellipse(25087.804016, 30235.749176, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jan 25 08:46:39 2012] Writing source region out to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src58_src.reg [Wed Jan 25 08:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (251, 311) - (326, 386) [Wed Jan 25 08:46:39 2012] XMMSAS bgd. selection expression = annulus(25087.804016, 30235.749176, 1087.500000, 2175.000000, X, Y) && !ellipse(26950.211000, 27556.557200, 830.368024, 483.413614, 54.456109, X, Y) && !ellipse(27376.498000, 27413.732600, 1169.656034, 1169.656034, 0.000000, X, Y) && !ellipse(25686.029700, 30573.437200, 394.125611, 394.125611, 0.000000, X, Y) && !ellipse(23131.732800, 29593.417000, 383.932011, 383.932011, 0.000000, X, Y) && !ellipse(24067.846840, 31082.397600, 420.195212, 364.448010, 0.000000, X, Y) && !ellipse(27341.337200, 28726.973000, 219.270406, 219.270406, 0.000000, X, Y) && !ellipse(26454.080200, 29132.072200, 303.989609, 303.989609, 0.000000, X, Y) && !ellipse(25713.730960, 28077.116200, 278.093608, 278.093608, 0.000000, X, Y) && !ellipse(26426.459167, 29687.411285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.002000, 29457.738000, 1266.752036, 1266.752036, 0.000000, X, Y) [Wed Jan 25 08:46:39 2012] Writing fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src58.gif [Wed Jan 25 09:13:05 2012] Mean detx,y = (3024.33, 2488.68) [Wed Jan 25 09:13:06 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jan 25 09:13:15 2012] Binned source spectrum to 10 counts/bin [Wed Jan 25 09:13:15 2012] Setting source spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src58_src_b10.pi.gz [Wed Jan 25 09:13:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src58_bgd.pi.gz [Wed Jan 25 11:53:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Jan 25 11:53:52 2012] rmf not generated due to insufficient counts [Wed Jan 25 12:14:58 2012] Updating aperture counts using extracted products [Wed Jan 25 12:14:58 2012] Error reading totcts from fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src58_src_b10.pi.gz [Wed Jan 25 12:15:02 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 25 12:15:02 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src58.arf [Wed Jan 25 12:15:02 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 25 12:15:02 2012] Updating source flux to 1.3e-13 [Wed Jan 25 12:22:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting