[Mon Jan 23 10:18:20 2012] Detection parameters:
  Position = (289.6, 312.8) = 0 42 54.72 41 16 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1950.2 +/- 54.2
  Background counts = 35.8
  Rate = 0.1 +/- 0.003

[Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 1.22'
[Mon Jan 23 19:45:19 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Mon Jan 23 19:45:19 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.114
[Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.04"
[Mon Jan 23 23:43:13 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jan 23 23:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src9.csv
[Mon Jan 23 23:43:13 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jan 23 23:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src9.csv
[Mon Jan 23 23:43:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jan 23 23:43:15 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Jan 23 23:44:09 2012] Spatial fit model total counts = 3125.360000, observed total counts = 3123.000000
[Mon Jan 23 23:44:09 2012] Offset between fit and detection position for source 5 = 0.181839 pixels
[Mon Jan 23 23:44:09 2012] 3087.440000 total counts/ 1989.770000 bgd. counts: snr = 24.607662
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.181839 pixels
  Position = (289.5, 312.7) = 0 42 54.79 41 16 3.6
  Extent = 4.3 (4.1-4.5)", rotation angle = 0
  Source counts = 1097.7 +/- 55.6
  Background counts = 1989.8
  Rate = 0.06 +/- 0.003
[Mon Jan 23 23:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:44:09 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:44:09 2012] Source does appear to be extended
[Mon Jan 23 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:00:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:00:18 2012] Initial guess for spatial extent in simple fitting = 4.33"
[Tue Jan 24 09:00:18 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.005
[Tue Jan 24 09:00:18 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 4.33"
[Tue Jan 24 12:46:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jan 24 12:46:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jan 24 12:46:14 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src9 appears to have run properly
[Tue Jan 24 12:46:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jan 24 12:46:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jan 24 12:46:16 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jan 24 12:47:36 2012] Spatial fit model total counts = 3122.490000, observed total counts = 3123.000000
[Tue Jan 24 12:47:36 2012] Offset between fit and detection position for source 5 = 0.002415 pixels
[Tue Jan 24 12:47:36 2012] 3126.980000 total counts/ 2035.440000 bgd. counts: snr = 24.194157
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.002415 pixels
  Position = (289.5, 312.7) = 0 42 54.78 41 16 3.6
  Extent = 4.3 (4.1-4.5)", rotation angle = 0
  Source counts = 1091.5 +/- 55.9
  Background counts = 2035.4
  Rate = 0.06 +/- 0.003
[Tue Jan 24 12:47:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:36 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 12:47:36 2012] Source does appear to be extended
[Tue Jan 24 12:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:46:38 2012] Counts = 1091.540000, rescaling region sizes by 2.000000
[Wed Jan 25 08:46:38 2012] XMMSAS src. selection expression = ellipse(25134.295600, 27160.664000, 516.447615, 516.447615, 0.000000, X, Y)
[Wed Jan 25 08:46:38 2012] Writing source region out to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src5_src.reg
[Wed Jan 25 08:46:38 2012] Extracting stamp from image fullrun_mos2_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (260, 283) - (319, 342)
[Wed Jan 25 08:46:38 2012] XMMSAS bgd. selection expression = annulus(25134.295600, 27160.664000, 1721.492050, 3442.984099, X, Y) && !ellipse(25510.936480, 25142.339000, 1736.584850, 1736.584850, 0.000000, X, Y) && !ellipse(28833.408000, 27670.262000, 1301.632037, 1301.632037, 0.000000, X, Y) && !ellipse(26617.121680, 26367.188289, 637.251306, 371.897969, 123.369917, X, Y) && !ellipse(26950.211000, 27556.557200, 830.368024, 483.413614, 54.456109, X, Y) && !ellipse(21598.241460, 25722.110200, 400.569612, 400.569612, 0.000000, X, Y) && !ellipse(23291.702404, 26402.246974, 496.970329, 376.042079, 229.733111, X, Y) && !ellipse(27376.498000, 27413.732600, 1169.656034, 1169.656034, 0.000000, X, Y) && !ellipse(25686.029700, 30573.437200, 394.125611, 394.125611, 0.000000, X, Y) && !ellipse(23131.732800, 29593.417000, 383.932011, 383.932011, 0.000000, X, Y) && !ellipse(24024.026816, 27209.900405, 370.196407, 344.835509, 342.006138, X, Y) && !ellipse(25841.830000, 26703.434000, 629.366418, 629.366418, 0.000000, X, Y) && !ellipse(26447.410004, 27103.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28194.403351, 26403.148010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.703200, 25577.447800, 377.632811, 291.529608, 60.804154, X, Y) && !ellipse(28625.570200, 25242.550000, 330.686410, 330.686410, 0.000000, X, Y) && !ellipse(28457.258400, 30391.831000, 364.481610, 364.481610, 0.000000, X, Y) && !ellipse(27341.337200, 28726.973000, 219.270406, 219.270406, 0.000000, X, Y) && !ellipse(26454.080200, 29132.072200, 303.989609, 303.989609, 0.000000, X, Y) && !ellipse(25713.730960, 28077.116200, 278.093608, 278.093608, 0.000000, X, Y) && !ellipse(26426.459167, 29687.411285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25087.804016, 30235.749176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24366.100677, 26479.742950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28365.297200, 24025.032200, 314.758409, 314.758409, 0.000000, X, Y) && !ellipse(26942.957947, 25707.155975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26469.433472, 23942.865112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29302.132019, 28219.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23645.655823, 24561.064789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.002000, 29457.738000, 1266.752036, 1266.752036, 0.000000, X, Y)
[Wed Jan 25 08:46:38 2012] Writing fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src5.gif
[Wed Jan 25 09:01:45 2012] Mean detx,y = (2278.02, -665.55) 
[Wed Jan 25 09:01:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 09:01:55 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 09:01:55 2012] Setting source spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jan 25 09:01:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jan 25 12:14:54 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:54 2012] Error reading totcts from fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jan 25 12:15:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:15:00 2012] Using photon index=1.80, rate=0.0593, arf fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src5.arf
[Wed Jan 25 12:15:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:15:00 2012] Updating source flux to 6.2e-13