[Mon Jan 23 10:18:20 2012] Detection parameters:
  Position = (332.0, 312.8) = 0 42 38.38 41 16 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8407.0 +/- 108.9
  Background counts = 35.9
  Rate = 0.5 +/- 0.006

[Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 2.65'
[Mon Jan 23 19:45:19 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Mon Jan 23 19:45:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.75"
[Mon Jan 23 23:43:13 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jan 23 23:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src2.csv
[Mon Jan 23 23:43:13 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jan 23 23:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src2.csv
[Mon Jan 23 23:43:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jan 23 23:43:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jan 23 23:43:14 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jan 23 23:44:09 2012] Warning, spatial fit 2 centroid is now closest to src. 69
[Mon Jan 23 23:44:09 2012] Source 4 is offset by 1.173273 and 1.040283 pixels which is larger than
2 X fitted extent = 1.154685 x 1.154685, not incorporating fit results
[Mon Jan 23 23:44:09 2012] Spatial fit model total counts = 1011.830000, observed total counts = 1010.000000
[Mon Jan 23 23:44:09 2012] Offset between fit and detection position for source 4 = 5.769155 pixels
[Mon Jan 23 23:44:09 2012] Warning, changing simple spatial fit ID from 2 to 77
[Mon Jan 23 23:44:09 2012] 1007.142000 total counts/ 715.324000 bgd. counts: snr = 10.910903
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 5.769155 pixels
  Position = (330.9, 318.5) = 0 42 38.78 41 16 28.6
  Extent = 16.3 (16.3-32.5)", rotation angle = 0
  Source counts = 291.8 +/- 31.7
  Background counts = 715.3
  Rate = 0.02 +/- 0.002
[Mon Jan 23 23:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:44:09 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:44:09 2012] Source does appear to be extended
[Mon Jan 23 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:44:09 2012] Source is confused with source 69
[Tue Jan 24 09:00:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:00:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 09:00:18 2012] Initial guess for spatial extent in simple fitting = 16.27"
[Tue Jan 24 09:00:18 2012] source mask rpix=3.7, npix_max = 71, mask sum = 66, frac = 0.918
[Tue Jan 24 09:00:18 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 16.27"
[Tue Jan 24 12:46:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jan 24 12:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src2.csv
[Tue Jan 24 12:46:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jan 24 12:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src2.csv
[Tue Jan 24 12:46:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:46:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jan 24 12:46:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jan 24 12:46:16 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jan 24 12:47:35 2012] Source 4 is offset by -0.890563 and 5.767103 pixels which is larger than
2 X fitted extent = 2.377030 x 2.377030, not incorporating fit results
[Tue Jan 24 12:47:36 2012] Source 4 is offset by 0.195149 and 6.715149 pixels which is larger than
2 X fitted extent = 1.666133 x 5.415908, not incorporating fit results
[Tue Jan 24 12:47:36 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.465870 pixels away
[Tue Jan 24 12:47:36 2012] Spatial fit model total counts = 1011.390000, observed total counts = 1010.000000
[Tue Jan 24 12:47:36 2012] Offset between fit and detection position for source 4 = 1.056950 pixels
[Tue Jan 24 12:47:36 2012] Warning, changing simple spatial fit ID from 2 to 71
[Tue Jan 24 12:47:36 2012] 933.489000 total counts/ 732.860000 bgd. counts: snr = 7.411109
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.056950 pixels
  Position = (332.0, 318.6) = 0 42 38.38 41 16 29.0
  Extent = 16.3 (16.3-32.5)", rotation angle = 0
  Source counts = 200.6 +/- 30.6
  Background counts = 732.9
  Rate = 0.01 +/- 0.002
[Tue Jan 24 12:47:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:36 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 12:47:36 2012] Source does appear to be extended
[Tue Jan 24 12:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:46:37 2012] XMMSAS src. selection expression = ellipse(28833.408000, 27670.262000, 976.224028, 976.224028, 0.000000, X, Y)
[Wed Jan 25 08:46:37 2012] Writing source region out to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src4_src.reg
[Wed Jan 25 08:46:37 2012] Extracting stamp from image fullrun_mos2_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (276, 263) - (388, 375)
[Wed Jan 25 08:46:37 2012] XMMSAS bgd. selection expression = annulus(28833.408000, 27670.262000, 1627.040047, 3254.080094, X, Y) && !ellipse(25510.936480, 25142.339000, 1736.584850, 1736.584850, 0.000000, X, Y) && !ellipse(32350.808200, 26590.474000, 382.536011, 382.536011, 0.000000, X, Y) && !ellipse(26617.121680, 26367.188289, 637.251306, 371.897969, 123.369917, X, Y) && !ellipse(26950.211000, 27556.557200, 830.368024, 483.413614, 54.456109, X, Y) && !ellipse(27376.498000, 27413.732600, 1169.656034, 1169.656034, 0.000000, X, Y) && !ellipse(30498.258176, 27516.860419, 434.194702, 382.310649, 15.716830, X, Y) && !ellipse(25686.029700, 30573.437200, 394.125611, 394.125611, 0.000000, X, Y) && !ellipse(25841.830000, 26703.434000, 629.366418, 629.366418, 0.000000, X, Y) && !ellipse(31648.257800, 30976.454800, 385.792011, 385.792011, 0.000000, X, Y) && !ellipse(32699.510162, 27088.628784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26447.410004, 27103.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28194.403351, 26403.148010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.703200, 25577.447800, 377.632811, 291.529608, 60.804154, X, Y) && !ellipse(30493.589691, 31458.090149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28625.570200, 25242.550000, 330.686410, 330.686410, 0.000000, X, Y) && !ellipse(28457.258400, 30391.831000, 364.481610, 364.481610, 0.000000, X, Y) && !ellipse(27341.337200, 28726.973000, 219.270406, 219.270406, 0.000000, X, Y) && !ellipse(29861.655160, 27475.681000, 396.196811, 396.196811, 0.000000, X, Y) && !ellipse(26454.080200, 29132.072200, 303.989609, 303.989609, 0.000000, X, Y) && !ellipse(25713.730960, 28077.116200, 278.093608, 278.093608, 0.000000, X, Y) && !ellipse(26426.459167, 29687.411285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25087.804016, 30235.749176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26942.957947, 25707.155975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31891.460000, 24301.054000, 360.086410, 360.086410, 0.000000, X, Y) && !ellipse(31187.146000, 23759.730000, 1440.344041, 1440.344041, 0.000000, X, Y) && !ellipse(26469.433472, 23942.865112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29302.132019, 28219.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30229.170000, 25413.114000, 1276.768037, 1276.768037, 0.000000, X, Y) && !ellipse(28498.002000, 29457.738000, 1266.752036, 1266.752036, 0.000000, X, Y)
[Wed Jan 25 08:46:37 2012] Writing fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src4.gif
[Wed Jan 25 08:50:47 2012] Mean detx,y = (-1198.83, 449.64) 
[Wed Jan 25 08:50:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 08:51:00 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 08:51:00 2012] Setting source spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jan 25 08:51:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jan 25 12:14:54 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:54 2012] Error reading totcts from fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jan 25 12:15:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:15:00 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src4.arf
[Wed Jan 25 12:15:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:15:00 2012] Updating source flux to 1e-13
[Wed Jan 25 12:22:43 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Wed Jan 25 12:22:43 2012] Flag c found in src. 4 procflags, skipping spectral fitting