[Mon Jan 23 10:18:20 2012] Detection parameters:
  Position = (376.4, 311.9) = 0 42 21.23 41 16 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 530.1 +/- 30.3
  Background counts = 22.0
  Rate = 0.03 +/- 0.002

[Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 5.74'
[Mon Jan 23 19:45:19 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Mon Jan 23 19:45:19 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.078
[Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.30"
[Mon Jan 23 23:43:13 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src27.ximg exists
[Mon Jan 23 23:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src27.csv
[Mon Jan 23 23:43:13 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Jan 23 23:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src27.csv
[Mon Jan 23 23:43:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Jan 23 23:43:15 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Jan 23 23:44:09 2012] Warning, spatial fit 27 centroid is now closest to src. 3
[Mon Jan 23 23:44:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:44:09 2012] Assessing source extent using major
[Mon Jan 23 23:44:09 2012] Source does appear to be extended
[Mon Jan 23 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:44:09 2012] Source is confused with source 3
[Tue Jan 24 09:00:18 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:00:18 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Tue Jan 24 09:00:18 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.078
[Tue Jan 24 09:00:18 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 9.30"
[Tue Jan 24 12:46:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src27.ximg exists
[Tue Jan 24 12:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src27.csv
[Tue Jan 24 12:46:14 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Jan 24 12:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src27.csv
[Tue Jan 24 12:46:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:46:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Jan 24 12:46:16 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Jan 24 12:46:16 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Jan 24 12:47:36 2012] Source 22 is offset by 4.000094 and 5.654400 pixels which is larger than
2 X fitted extent = 1.952317 x 1.952317, not incorporating fit results
[Tue Jan 24 12:47:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:36 2012] Assessing source extent using major
[Tue Jan 24 12:47:36 2012] Source does appear to be extended
[Tue Jan 24 12:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 08:46:38 2012] XMMSAS src. selection expression = ellipse(32699.510162, 27088.628784, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 08:46:38 2012] Writing source region out to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src22_src.reg
[Wed Jan 25 08:46:38 2012] Extracting stamp from image fullrun_mos2_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (339, 274) - (414, 349)
[Wed Jan 25 08:46:38 2012] XMMSAS bgd. selection expression = annulus(32699.510162, 27088.628784, 1087.500000, 2175.000000, X, Y) && !ellipse(32350.808200, 26590.474000, 382.536011, 382.536011, 0.000000, X, Y) && !ellipse(30498.258176, 27516.860419, 434.194702, 382.310649, 15.716830, X, Y) && !ellipse(33321.363526, 24716.285606, 386.732074, 312.167311, 79.150843, X, Y) && !ellipse(35407.791382, 29189.497711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31187.146000, 23759.730000, 1440.344041, 1440.344041, 0.000000, X, Y) && !ellipse(34822.556549, 28050.219330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30229.170000, 25413.114000, 1276.768037, 1276.768037, 0.000000, X, Y)
[Wed Jan 25 08:46:38 2012] Writing fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src22.gif
[Wed Jan 25 09:07:22 2012] Mean detx,y = (-4853.60, 1030.90) 
[Wed Jan 25 09:07:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 09:07:37 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 09:07:37 2012] Setting source spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jan 25 09:07:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Jan 25 11:05:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 11:05:24 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:56 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:56 2012] Error reading totcts from fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jan 25 12:15:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:15:01 2012] Using photon index=1.80, rate=0.0348, arf fullrun_mos2_xmm0600660201_pi300-10000_pass1_cl_src22.arf
[Wed Jan 25 12:15:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:15:01 2012] Updating source flux to 4.4e-13
[Wed Jan 25 12:22:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting