[Mon Jan 23 10:18:20 2012] Detection parameters: Position = (400.4, 339.4) = 0 42 11.95 41 17 58.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 330.4 +/- 22.6 Background counts = 14.1 Rate = 0.03 +/- 0.002 [Mon Jan 23 10:18:22 2012] Off-axis axis estimate = 7.97' [Mon Jan 23 19:45:19 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 19:45:19 2012] Initial guess for spatial extent in simple fitting = 10.41" [Mon Jan 23 19:45:19 2012] source mask rpix=2.4, npix_max = 33, mask sum = 21, frac = 0.627 [Mon Jan 23 19:45:19 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.41" [Mon Jan 23 23:43:13 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src29.ximg exists [Mon Jan 23 23:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src29.csv [Mon Jan 23 23:43:13 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src29_1.ximg exists [Mon Jan 23 23:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src29.csv [Mon Jan 23 23:43:13 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Mon Jan 23 23:43:15 2012] fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Mon Jan 23 23:43:15 2012] Fit fullrun_mos2_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Mon Jan 23 23:44:09 2012] Warning, spatial fit 29 centroid is now closest to src. 13 [Mon Jan 23 23:44:09 2012] Spatial fit model total counts = 268.227000, observed total counts = 268.000000 [Mon Jan 23 23:44:09 2012] Offset between fit and detection position for source 18 = 0.911489 pixels [Mon Jan 23 23:44:09 2012] Warning, changing simple spatial fit ID from 29 to 67 [Mon Jan 23 23:44:09 2012] 272.266020 total counts/ 270.828000 bgd. counts: snr = 0.087381 Spatial fit parameters: Offset between fit and detection position for source 18 = 0.911489 pixels Position = (399.5, 339.4) = 0 42 12.30 41 17 59.1 Extent = 3.2 (2.5-14.1)", rotation angle = 0 Source counts = 1.4 +/- 16.5 Background counts = 270.8 Rate = 8e-05 +/- 0.0009 Deleting source due to low Poisson probability