[Mon Jan 23 10:17:35 2012] Detection parameters:
  Position = (355.6, 492.2) = 0 42 29.18 41 29 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.8 +/- 12.1
  Background counts = 7.2
  Rate = 0.005 +/- 0.0007

[Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 14.65'
[Mon Jan 23 16:04:54 2012] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:04:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 16:04:54 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Mon Jan 23 16:04:54 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.914
[Mon Jan 23 16:04:54 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 13.75"
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src75.ximg exists
[Mon Jan 23 19:45:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src75.csv
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src75_1.ximg exists
[Mon Jan 23 19:45:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src75.csv
[Mon Jan 23 19:45:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:45:19 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Mon Jan 23 19:45:19 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Mon Jan 23 19:45:19 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Mon Jan 23 23:43:53 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 17.144171 pixels away
[Mon Jan 23 23:43:53 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:53 2012] Assessing source extent using major
[Mon Jan 23 23:43:53 2012] Source does appear to be extended
[Mon Jan 23 23:43:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 06:19:11 2012] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 06:19:11 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Tue Jan 24 06:19:11 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.914
[Tue Jan 24 06:19:11 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 13.75"
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src68.ximg exists
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src68_1.ximg exists
[Tue Jan 24 09:00:17 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src68 appears to have run properly
[Tue Jan 24 09:00:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Tue Jan 24 09:00:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Tue Jan 24 09:00:18 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Tue Jan 24 12:47:12 2012] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 17.637957 pixels away
[Tue Jan 24 12:47:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:12 2012] Assessing source extent using major
[Tue Jan 24 12:47:12 2012] Source does appear to be extended
[Tue Jan 24 12:47:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:28:05 2012] XMMSAS src. selection expression = ellipse(30891.164398, 42770.761108, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 05:28:05 2012] Writing source region out to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src87_src.reg
[Wed Jan 25 05:28:05 2012] Extracting stamp from image fullrun_mos1_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (318, 455) - (393, 530)
[Wed Jan 25 05:28:05 2012] XMMSAS bgd. selection expression = annulus(30891.164398, 42770.761108, 1087.500000, 2175.000000, X, Y)
[Wed Jan 25 05:28:05 2012] Writing fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src87.gif
[Wed Jan 25 05:55:15 2012] Mean detx,y = (16151.27, -1234.06) 
[Wed Jan 25 05:55:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:55:30 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:55:30 2012] Setting source spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed Jan 25 05:55:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Wed Jan 25 08:42:56 2012] Not generating rmf since there are only 88 counts
[Wed Jan 25 08:42:56 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:50 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:50 2012] Error reading totcts from fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed Jan 25 12:14:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:54 2012] Using photon index=1.80, rate=0.00481, arf fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src87.arf
[Wed Jan 25 12:14:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:54 2012] Updating source flux to 1.3e-13
[Wed Jan 25 12:15:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting