[Mon Jan 23 10:17:33 2012] Detection parameters:
  Position = (268.3, 304.0) = 0 43 2.94 41 15 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1908.4 +/- 53.7
  Background counts = 28.1
  Rate = 0.1 +/- 0.004

[Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 2.22'
[Mon Jan 23 16:04:54 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:04:54 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Mon Jan 23 16:04:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Mon Jan 23 16:04:54 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.54"
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src7.csv
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src7.csv
[Mon Jan 23 19:45:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jan 23 19:45:18 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jan 23 23:43:53 2012] Spatial fit model total counts = 2097.730000, observed total counts = 2094.000000
[Mon Jan 23 23:43:53 2012] Offset between fit and detection position for source 8 = 0.015641 pixels
[Mon Jan 23 23:43:53 2012] 2126.287000 total counts/ 830.277000 bgd. counts: snr = 44.977659
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.015641 pixels
  Position = (268.3, 304.0) = 0 43 2.94 41 15 25.7
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 1296.0 +/- 46.1
  Background counts = 830.3
  Rate = 0.07 +/- 0.003
[Mon Jan 23 23:43:53 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:53 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:43:53 2012] Source does appear to be extended
[Mon Jan 23 23:43:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 06:19:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 06:19:11 2012] Initial guess for spatial extent in simple fitting = 5.31"
[Tue Jan 24 06:19:11 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.012
[Tue Jan 24 06:19:11 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.31"
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src7.csv
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src7.csv
[Tue Jan 24 09:00:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jan 24 09:00:17 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jan 24 12:47:12 2012] Spatial fit model total counts = 2098.810000, observed total counts = 2094.000000
[Tue Jan 24 12:47:12 2012] Offset between fit and detection position for source 8 = 0.001342 pixels
[Tue Jan 24 12:47:12 2012] 2127.417000 total counts/ 831.887000 bgd. counts: snr = 44.917472
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.001342 pixels
  Position = (268.3, 304.0) = 0 43 2.94 41 15 25.7
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 1295.5 +/- 46.1
  Background counts = 831.9
  Rate = 0.07 +/- 0.003
[Tue Jan 24 12:47:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 12:47:12 2012] Source does appear to be extended
[Tue Jan 24 12:47:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:28:03 2012] Counts = 1295.530000, rescaling region sizes by 2.000000
[Wed Jan 25 05:28:03 2012] XMMSAS src. selection expression = ellipse(23294.753000, 26403.811200, 637.279218, 637.279218, 0.000000, X, Y)
[Wed Jan 25 05:28:03 2012] Writing source region out to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src8_src.reg
[Wed Jan 25 05:28:03 2012] Extracting stamp from image fullrun_mos1_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (232, 267) - (305, 341)
[Wed Jan 25 05:28:03 2012] XMMSAS bgd. selection expression = annulus(23294.753000, 26403.811200, 2124.264061, 4248.528122, X, Y) && !ellipse(25532.304380, 25143.160400, 1416.360041, 1416.360041, 0.000000, X, Y) && !ellipse(26612.693200, 26352.584200, 610.347218, 364.487210, 119.468000, X, Y) && !ellipse(21598.645775, 25718.045144, 472.256058, 398.438669, 76.703644, X, Y) && !ellipse(26915.302200, 27570.141200, 717.491221, 368.834411, 60.258800, X, Y) && !ellipse(27525.224000, 27255.678000, 369.733611, 369.733611, 0.000000, X, Y) && !ellipse(25162.902000, 27150.744000, 345.231210, 345.231210, 0.000000, X, Y) && !ellipse(25754.744000, 30512.094000, 363.524810, 363.524810, 0.000000, X, Y) && !ellipse(23145.334137, 29594.644562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25685.214813, 26670.498840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24032.285360, 27207.755600, 367.811211, 367.811211, 0.000000, X, Y) && !ellipse(27923.308929, 26927.322479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27410.531600, 21848.377000, 379.025742, 379.025742, 0.000000, X, Y) && !ellipse(26406.981873, 27096.078796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28147.442000, 26527.344000, 1178.400034, 1178.400034, 0.000000, X, Y) && !ellipse(26427.152130, 29796.004639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27329.031600, 28706.170000, 348.623210, 348.623210, 0.000000, X, Y) && !ellipse(26441.157410, 28933.069672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22039.841180, 23256.762600, 286.271208, 286.271208, 0.000000, X, Y) && !ellipse(24374.440125, 26476.198486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25077.845001, 30221.871338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23029.686371, 27074.419067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.142000, 23892.468400, 1525.360044, 253.728807, 320.875895, X, Y)
[Wed Jan 25 05:28:03 2012] Writing fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src8.gif
[Wed Jan 25 05:35:09 2012] Mean detx,y = (-1646.50, -4014.00) 
[Wed Jan 25 05:35:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:35:29 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:35:29 2012] Setting source spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jan 25 05:35:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jan 25 12:14:47 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:47 2012] Error reading totcts from fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jan 25 12:14:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:51 2012] Using photon index=1.80, rate=0.0703, arf fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src8.arf
[Wed Jan 25 12:14:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:51 2012] Updating source flux to 8.1e-13