[Mon Jan 23 10:17:34 2012] Detection parameters:
  Position = (265.3, 311.8) = 0 43 4.12 41 16 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.4 +/- 12.9
  Background counts = 27.1
  Rate = 0.004 +/- 0.0009

[Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 2.59'
[Mon Jan 23 16:04:54 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:04:54 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Mon Jan 23 16:04:54 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.207
[Mon Jan 23 16:04:54 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 7.72"
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src79.ximg exists
[Mon Jan 23 19:45:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src79.csv
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src79_1.ximg exists
[Mon Jan 23 19:45:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src79.csv
[Mon Jan 23 19:45:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:45:19 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Mon Jan 23 19:45:19 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Mon Jan 23 19:45:19 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Mon Jan 23 23:43:53 2012] Source 73 is offset by -3.951582 and 4.539598 pixels which is larger than
2 X fitted extent = 2.277835 x 2.277835, not incorporating fit results
[Mon Jan 23 23:43:53 2012] Source 73 is offset by -2.863651 and 5.860518 pixels which is larger than
2 X fitted extent = 2.396593 x 2.396593, not incorporating fit results
[Mon Jan 23 23:43:53 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:53 2012] Assessing source extent using major
[Mon Jan 23 23:43:53 2012] Source does appear to be extended
[Mon Jan 23 23:43:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 06:19:11 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 06:19:11 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Tue Jan 24 06:19:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.207
[Tue Jan 24 06:19:11 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 7.72"
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src70.ximg exists
[Tue Jan 24 09:00:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src70.csv
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src70_1.ximg exists
[Tue Jan 24 09:00:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src70.csv
[Tue Jan 24 09:00:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:00:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Tue Jan 24 09:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Tue Jan 24 09:00:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Tue Jan 24 09:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Tue Jan 24 09:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 12:47:12 2012] Source 73 is offset by -2.778823 and 5.860518 pixels which is larger than
2 X fitted extent = 1.595931 x 1.595931, not incorporating fit results
[Tue Jan 24 12:47:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:12 2012] Assessing source extent using major
[Tue Jan 24 12:47:12 2012] Source does appear to be extended
[Tue Jan 24 12:47:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:28:05 2012] XMMSAS src. selection expression = ellipse(23029.686371, 27074.419067, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 05:28:05 2012] Writing source region out to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src73_src.reg
[Wed Jan 25 05:28:05 2012] Extracting stamp from image fullrun_mos1_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (228, 274) - (303, 349)
[Wed Jan 25 05:28:05 2012] XMMSAS bgd. selection expression = annulus(23029.686371, 27074.419067, 1087.500000, 2175.000000, X, Y) && !ellipse(25532.304380, 25143.160400, 1416.360041, 1416.360041, 0.000000, X, Y) && !ellipse(21598.645775, 25718.045144, 472.256058, 398.438669, 76.703644, X, Y) && !ellipse(23294.753000, 26403.811200, 424.852812, 424.852812, 0.000000, X, Y) && !ellipse(25162.902000, 27150.744000, 345.231210, 345.231210, 0.000000, X, Y) && !ellipse(23145.334137, 29594.644562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25685.214813, 26670.498840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24032.285360, 27207.755600, 367.811211, 367.811211, 0.000000, X, Y) && !ellipse(24374.440125, 26476.198486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.142000, 23892.468400, 1525.360044, 253.728807, 320.875895, X, Y)
[Wed Jan 25 05:28:05 2012] Writing fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src73.gif
[Wed Jan 25 05:56:14 2012] Mean detx,y = (-1331.24, -4253.31) 
[Wed Jan 25 05:56:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:56:25 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:56:25 2012] Setting source spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Jan 25 05:56:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed Jan 25 08:46:32 2012] Not generating rmf since there are only 57 counts
[Wed Jan 25 08:46:32 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:51 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:51 2012] Error reading totcts from fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Jan 25 12:14:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:54 2012] Using photon index=1.80, rate=0.00389, arf fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src73.arf
[Wed Jan 25 12:14:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:54 2012] Updating source flux to 4.5e-14
[Wed Jan 25 12:15:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting