[Mon Jan 23 10:17:34 2012] Detection parameters: Position = (296.3, 323.1) = 0 42 52.15 41 16 50.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 163.7 +/- 19.4 Background counts = 35.7 Rate = 0.01 +/- 0.001 [Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 1.79' [Mon Jan 23 16:04:54 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 16:04:54 2012] Initial guess for spatial extent in simple fitting = 7.32" [Mon Jan 23 16:04:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839 [Mon Jan 23 16:04:54 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 7.32" [Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src60.ximg exists [Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src60.csv [Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src60_1.ximg exists [Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src60.csv [Mon Jan 23 19:45:17 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src60_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 23 19:45:19 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src60.ximg exists [Mon Jan 23 19:45:19 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists [Mon Jan 23 19:45:19 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly [Mon Jan 23 23:43:53 2012] Source 71 is offset by -6.042302 and -0.563786 pixels which is larger than 2 X fitted extent = 2.863310 x 2.863310, not incorporating fit results [Mon Jan 23 23:43:53 2012] Spatial fit model total counts = 1151.490000, observed total counts = 1151.000000 [Mon Jan 23 23:43:53 2012] Offset between fit and detection position for source 71 = 0.349942 pixels [Mon Jan 23 23:43:53 2012] 1133.272200 total counts/ 1087.400000 bgd. counts: snr = 1.391089 Spatial fit parameters: Offset between fit and detection position for source 71 = 0.349942 pixels Position = (296.1, 323.4) = 0 42 52.22 41 16 49.7 Extent = 3.1 (1.8-4.4)", rotation angle = 0 Source counts = 45.9 +/- 33.7 Background counts = 1087.4 Rate = 0.002 +/- 0.002 Deleting source due to low Poisson probability