[Mon Jan 23 10:17:34 2012] Detection parameters:
  Position = (288.6, 448.9) = 0 42 55.12 41 25 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.5 +/- 14.1
  Background counts = 9.2
  Rate = 0.006 +/- 0.0008

[Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 10.93'
[Mon Jan 23 16:04:54 2012] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:04:54 2012] Initial guess for spatial extent in simple fitting = 11.89"
[Mon Jan 23 16:04:54 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.004
[Mon Jan 23 16:04:54 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 11.89"
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src67.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src67.csv
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src67_1.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src67.csv
[Mon Jan 23 19:45:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:45:19 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Mon Jan 23 19:45:19 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Mon Jan 23 19:45:19 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Mon Jan 23 23:43:53 2012] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 13.532245 pixels away
[Mon Jan 23 23:43:53 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:53 2012] Assessing source extent using major
[Mon Jan 23 23:43:53 2012] Source does appear to be extended
[Mon Jan 23 23:43:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 06:19:11 2012] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 06:19:11 2012] Initial guess for spatial extent in simple fitting = 11.89"
[Tue Jan 24 06:19:11 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.004
[Tue Jan 24 06:19:11 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 11.89"
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src62.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src62.csv
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src62_1.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src62.csv
[Tue Jan 24 09:00:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:00:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Tue Jan 24 09:00:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Tue Jan 24 09:00:18 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Tue Jan 24 12:47:12 2012] Spatial fit model total counts = 277.856000, observed total counts = 278.000000
[Tue Jan 24 12:47:12 2012] Offset between fit and detection position for source 52 = 1.441517 pixels
[Tue Jan 24 12:47:12 2012] 281.820000 total counts/ 154.757000 bgd. counts: snr = 10.213955
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 1.441517 pixels
  Position = (290.0, 448.5) = 0 42 54.58 41 25 54.2
  Extent = 8.9 (7.5-10.7)", rotation angle = 0
  Source counts = 127.1 +/- 16.8
  Background counts = 154.8
  Rate = 0.007 +/- 0.0009
[Tue Jan 24 12:47:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 12:47:12 2012] Source does appear to be extended
[Tue Jan 24 12:47:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:28:05 2012] XMMSAS src. selection expression = ellipse(25181.864800, 38973.547400, 536.749327, 536.749327, 0.000000, X, Y)
[Wed Jan 25 05:28:05 2012] Writing source region out to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src52_src.reg
[Wed Jan 25 05:28:05 2012] Extracting stamp from image fullrun_mos1_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (259, 418) - (321, 479)
[Wed Jan 25 05:28:05 2012] XMMSAS bgd. selection expression = annulus(25181.864800, 38973.547400, 894.582211, 1789.164423, X, Y) && !ellipse(26607.004800, 38315.370000, 497.935886, 497.935886, 0.000000, X, Y)
[Wed Jan 25 05:28:05 2012] Writing fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src52.gif
[Wed Jan 25 05:53:24 2012] Mean detx,y = (10947.47, -5651.89) 
[Wed Jan 25 05:53:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:53:39 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:53:39 2012] Setting source spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Wed Jan 25 05:53:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Wed Jan 25 12:14:50 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:50 2012] Error reading totcts from fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Wed Jan 25 12:14:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:53 2012] Using photon index=1.80, rate=0.00689, arf fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src52.arf
[Wed Jan 25 12:14:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:53 2012] Updating source flux to 1.4e-13