[Mon Jan 23 10:17:33 2012] Detection parameters:
  Position = (324.1, 304.3) = 0 42 41.44 41 15 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 418.5 +/- 30.2
  Background counts = 39.5
  Rate = 0.02 +/- 0.002

[Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 1.91'
[Mon Jan 23 16:04:54 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:04:54 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Mon Jan 23 16:04:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Mon Jan 23 16:04:54 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 7.38"
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src34.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src34.csv
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src34_1.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src34.csv
[Mon Jan 23 19:45:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Mon Jan 23 19:45:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src34.csv
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Mon Jan 23 19:45:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src34.csv
[Mon Jan 23 19:45:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:43:53 2012] Spatial fit model total counts = 5839.340000, observed total counts = 5792.000000
[Mon Jan 23 23:43:53 2012] Offset between fit and detection position for source 33 = 1.171569 pixels
[Mon Jan 23 23:43:53 2012] Warning, changing simple spatial fit ID from 34 to 21
[Mon Jan 23 23:43:53 2012] 5593.310000 total counts/ 4528.010000 bgd. counts: snr = 15.831360
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 1.171569 pixels
  Position = (324.1, 305.5) = 0 42 41.42 41 15 31.9
  Extent = 14.7 (14.7-14.7)", rotation angle = 0
  Source counts = 1065.3 +/- 74.8
  Background counts = 4528.0
  Rate = 0.06 +/- 0.004
[Mon Jan 23 23:43:53 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:53 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:43:53 2012] Source does appear to be extended
[Mon Jan 23 23:43:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:43:53 2012] Source is confused with source 32
[Tue Jan 24 06:19:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 06:19:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 06:19:11 2012] Initial guess for spatial extent in simple fitting = 14.73"
[Tue Jan 24 06:19:11 2012] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.927
[Tue Jan 24 06:19:11 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 14.73"
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src34.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src34.csv
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src34.csv
[Tue Jan 24 09:00:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue Jan 24 09:00:17 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Tue Jan 24 12:47:12 2012] Warning, spatial fit 34 centroid is now closest to src. 32
[Tue Jan 24 12:47:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 12:47:12 2012] Source does appear to be extended
[Tue Jan 24 12:47:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:28:04 2012] Counts = 1065.300000, rescaling region sizes by 2.000000
[Wed Jan 25 05:28:04 2012] XMMSAS src. selection expression = ellipse(28147.442000, 26527.344000, 1767.600051, 1767.600051, 0.000000, X, Y)
[Wed Jan 25 05:28:04 2012] Writing source region out to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src33_src.reg
[Wed Jan 25 05:28:04 2012] Extracting stamp from image fullrun_mos1_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (223, 204) - (426, 407)
[Wed Jan 25 05:28:04 2012] XMMSAS bgd. selection expression = annulus(28147.442000, 26527.344000, 5892.000170, 11784.000339, X, Y) && !ellipse(25532.304380, 25143.160400, 1416.360041, 1416.360041, 0.000000, X, Y) && !ellipse(28821.182860, 27157.143400, 406.109612, 406.109612, 0.000000, X, Y) && !ellipse(32348.498470, 26589.691749, 400.987516, 361.257400, 86.486749, X, Y) && !ellipse(26612.693200, 26352.584200, 610.347218, 364.487210, 119.468000, X, Y) && !ellipse(21598.645775, 25718.045144, 472.256058, 398.438669, 76.703644, X, Y) && !ellipse(26915.302200, 27570.141200, 717.491221, 368.834411, 60.258800, X, Y) && !ellipse(23294.753000, 26403.811200, 424.852812, 424.852812, 0.000000, X, Y) && !ellipse(27525.224000, 27255.678000, 369.733611, 369.733611, 0.000000, X, Y) && !ellipse(25162.902000, 27150.744000, 345.231210, 345.231210, 0.000000, X, Y) && !ellipse(25754.744000, 30512.094000, 363.524810, 363.524810, 0.000000, X, Y) && !ellipse(30499.987020, 27522.410400, 404.149612, 404.149612, 0.000000, X, Y) && !ellipse(34557.811236, 30217.759239, 491.352090, 390.341946, 218.035975, X, Y) && !ellipse(30271.468159, 23759.330395, 436.513248, 384.701942, 333.932200, X, Y) && !ellipse(33418.142678, 22751.049991, 513.241866, 313.032554, 110.869471, X, Y) && !ellipse(23145.334137, 29594.644562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33320.185200, 24728.431000, 382.945611, 333.704010, 303.511215, X, Y) && !ellipse(25685.214813, 26670.498840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.283691, 21256.181229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.919800, 31076.656800, 392.820011, 392.820011, 0.000000, X, Y) && !ellipse(24032.285360, 27207.755600, 367.811211, 367.811211, 0.000000, X, Y) && !ellipse(27923.308929, 26927.322479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35779.258345, 29816.806931, 496.503040, 365.006621, 54.390203, X, Y) && !ellipse(26607.004800, 38315.370000, 497.935886, 497.935886, 0.000000, X, Y) && !ellipse(27410.531600, 21848.377000, 379.025742, 379.025742, 0.000000, X, Y) && !ellipse(34118.949890, 22993.155823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32707.589417, 27079.755676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15560.297760, 25545.796570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31645.243000, 30989.198000, 389.580811, 389.580811, 0.000000, X, Y) && !ellipse(19744.663757, 32233.709167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26406.981873, 27096.078796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31156.297800, 22742.908600, 409.522412, 409.522412, 0.000000, X, Y) && !ellipse(16232.889560, 23941.282600, 544.746416, 544.746416, 0.000000, X, Y) && !ellipse(27156.589041, 20623.342681, 409.410890, 328.744384, 54.452036, X, Y) && !ellipse(32497.713940, 24178.560000, 278.912008, 278.912008, 0.000000, X, Y) && !ellipse(30481.622885, 31452.342147, 375.204232, 345.115832, 328.894581, X, Y) && !ellipse(27927.390000, 25578.528000, 142.722404, 142.722404, 0.000000, X, Y) && !ellipse(17396.461800, 17247.514400, 513.305615, 513.305615, 0.000000, X, Y) && !ellipse(16656.707578, 20723.647600, 505.219215, 505.219215, 0.000000, X, Y) && !ellipse(23247.008642, 33523.002765, 478.366285, 319.105074, 329.261624, X, Y) && !ellipse(31123.919066, 19866.812793, 528.226428, 373.386343, 329.106030, X, Y) && !ellipse(34770.956055, 29670.535919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26427.152130, 29796.004639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28619.890200, 25242.300400, 291.696808, 291.696808, 0.000000, X, Y) && !ellipse(27329.031600, 28706.170000, 348.623210, 348.623210, 0.000000, X, Y) && !ellipse(26441.157410, 28933.069672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28447.058447, 30389.692032, 478.301434, 314.314265, 170.903297, X, Y) && !ellipse(32308.206540, 24821.951200, 254.115207, 254.115207, 0.000000, X, Y) && !ellipse(35396.727875, 29257.607178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29223.832000, 27232.722000, 1311.336038, 1311.336038, 0.000000, X, Y) && !ellipse(22039.841180, 23256.762600, 286.271208, 286.271208, 0.000000, X, Y) && !ellipse(24374.440125, 26476.198486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37775.723800, 14749.954600, 574.879217, 574.879217, 0.000000, X, Y) && !ellipse(25077.845001, 30221.871338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35496.713623, 32874.171265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29586.446200, 32003.538400, 332.416010, 332.416010, 0.000000, X, Y) && !ellipse(34917.156725, 20909.771276, 504.850325, 226.394824, 111.246124, X, Y) && !ellipse(28347.340800, 24031.238800, 428.138156, 428.138156, 0.000000, X, Y) && !ellipse(25181.864800, 38973.547400, 715.665769, 715.665769, 0.000000, X, Y) && !ellipse(30955.147949, 24318.827881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17693.839200, 30129.135800, 488.860014, 488.860014, 0.000000, X, Y) && !ellipse(39722.450287, 24220.944916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28116.127777, 33209.551910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36453.498000, 13615.357400, 2091.488060, 2091.488060, 0.000000, X, Y) && !ellipse(23029.686371, 27074.419067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.142000, 23892.468400, 1525.360044, 253.728807, 320.875895, X, Y)
[Wed Jan 25 05:28:04 2012] Writing fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src33.gif
[Wed Jan 25 05:42:00 2012] Mean detx,y = (137.71, 355.39) 
[Wed Jan 25 05:42:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:47:16 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:47:16 2012] Setting source spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Jan 25 05:47:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Jan 25 12:14:48 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:48 2012] Error reading totcts from fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Jan 25 12:14:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:53 2012] Using photon index=1.80, rate=0.0578, arf fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src33.arf
[Wed Jan 25 12:14:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:53 2012] Updating source flux to 5.1e-13
[Wed Jan 25 12:15:08 2012] Flag c found in src. 33 procflags, skipping spectral fitting