[Mon Jan 23 10:17:33 2012] Detection parameters:
  Position = (321.5, 310.1) = 0 42 42.41 41 15 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 951.1 +/- 42.6
  Background counts = 39.5
  Rate = 0.05 +/- 0.002

[Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 1.87'
[Mon Jan 23 16:04:54 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:04:54 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Mon Jan 23 16:04:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.039
[Mon Jan 23 16:04:54 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.37"
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src21.csv
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src21.csv
[Mon Jan 23 19:45:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jan 23 19:45:18 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Jan 23 23:43:53 2012] Warning, spatial fit 21 centroid is now closest to src. 33
[Mon Jan 23 23:43:53 2012] Source 32 is offset by -9.272196 and -1.691006 pixels which is larger than
2 X fitted extent = 0.947940 x 0.947940, not incorporating fit results
[Mon Jan 23 23:43:53 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:53 2012] Assessing source extent using major
[Mon Jan 23 23:43:53 2012] Source does appear to be extended
[Mon Jan 23 23:43:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:43:53 2012] Source is confused with source 6
[Tue Jan 24 06:19:11 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 06:19:11 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Tue Jan 24 06:19:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.039
[Tue Jan 24 06:19:11 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.37"
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src21.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src21.csv
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src21.csv
[Tue Jan 24 09:00:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Jan 24 09:00:17 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Jan 24 12:47:12 2012] Warning, spatial fit 21 centroid is now closest to src. 6
[Tue Jan 24 12:47:12 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 10.617165 pixels away
[Tue Jan 24 12:47:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:12 2012] Assessing source extent using major
[Tue Jan 24 12:47:12 2012] Source does appear to be extended
[Tue Jan 24 12:47:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:28:04 2012] XMMSAS src. selection expression = ellipse(27923.308929, 26927.322479, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 05:28:04 2012] Writing source region out to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src32_src.reg
[Wed Jan 25 05:28:04 2012] Extracting stamp from image fullrun_mos1_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (284, 273) - (359, 348)
[Wed Jan 25 05:28:04 2012] XMMSAS bgd. selection expression = annulus(27923.308929, 26927.322479, 1087.500000, 2175.000000, X, Y) && !ellipse(25532.304380, 25143.160400, 1416.360041, 1416.360041, 0.000000, X, Y) && !ellipse(28821.182860, 27157.143400, 406.109612, 406.109612, 0.000000, X, Y) && !ellipse(26612.693200, 26352.584200, 610.347218, 364.487210, 119.468000, X, Y) && !ellipse(26915.302200, 27570.141200, 717.491221, 368.834411, 60.258800, X, Y) && !ellipse(27525.224000, 27255.678000, 369.733611, 369.733611, 0.000000, X, Y) && !ellipse(30499.987020, 27522.410400, 404.149612, 404.149612, 0.000000, X, Y) && !ellipse(25685.214813, 26670.498840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26406.981873, 27096.078796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28147.442000, 26527.344000, 1178.400034, 1178.400034, 0.000000, X, Y) && !ellipse(27927.390000, 25578.528000, 142.722404, 142.722404, 0.000000, X, Y) && !ellipse(26427.152130, 29796.004639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28619.890200, 25242.300400, 291.696808, 291.696808, 0.000000, X, Y) && !ellipse(27329.031600, 28706.170000, 348.623210, 348.623210, 0.000000, X, Y) && !ellipse(26441.157410, 28933.069672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29223.832000, 27232.722000, 1311.336038, 1311.336038, 0.000000, X, Y) && !ellipse(30955.147949, 24318.827881, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:28:04 2012] Writing fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src32.gif
[Wed Jan 25 05:39:06 2012] Mean detx,y = (168.13, 246.46) 
[Wed Jan 25 05:39:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:39:13 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:39:13 2012] Setting source spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Jan 25 05:39:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Jan 25 07:05:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 07:05:22 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:48 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:48 2012] Error reading totcts from fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Jan 25 12:14:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:52 2012] Using photon index=1.80, rate=0.0524, arf fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src32.arf
[Wed Jan 25 12:14:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:52 2012] Updating source flux to 5.2e-13
[Wed Jan 25 12:15:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting