[Mon Jan 23 10:17:33 2012] Detection parameters: Position = (372.5, 306.1) = 0 42 22.76 41 15 34.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 3126.4 +/- 67.2 Background counts = 24.7 Rate = 0.2 +/- 0.004 [Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 5.40' [Mon Jan 23 16:04:54 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 16:04:54 2012] Initial guess for spatial extent in simple fitting = 9.13" [Mon Jan 23 16:04:54 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.926 [Mon Jan 23 16:04:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.13" [Mon Jan 23 19:45:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src3.ximg exists [Mon Jan 23 19:45:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src3.csv [Mon Jan 23 19:45:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src3_1.ximg exists [Mon Jan 23 19:45:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src3.csv [Mon Jan 23 19:45:16 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Mon Jan 23 19:45:18 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Mon Jan 23 23:43:53 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.919677 pixels away [Mon Jan 23 23:43:53 2012] Spatial fit model total counts = 3071.490000, observed total counts = 3074.000000 [Mon Jan 23 23:43:53 2012] Offset between fit and detection position for source 3 = 0.182006 pixels [Mon Jan 23 23:43:53 2012] Warning, changing simple spatial fit ID from 3 to 26 [Mon Jan 23 23:43:53 2012] 2985.400000 total counts/ 1221.580000 bgd. counts: snr = 50.465352 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.182006 pixels Position = (372.4, 306.3) = 0 42 22.78 41 15 35.3 Extent = 4.2 (4.0-4.3)", rotation angle = 0 Source counts = 1763.8 +/- 54.6 Background counts = 1221.6 Rate = 0.1 +/- 0.003 [Mon Jan 23 23:43:53 2012] Vigneting correction estimate = 1.000000 [Mon Jan 23 23:43:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 23 23:43:53 2012] Assessing source extent using major axis lower bound [Mon Jan 23 23:43:53 2012] Source does appear to be extended [Mon Jan 23 23:43:53 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 23 23:43:53 2012] Source is confused with source 28 [Tue Jan 24 06:19:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Jan 24 06:19:11 2012] Initial guess for spatial extent in simple fitting = 4.18" [Tue Jan 24 06:19:11 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.055 [Tue Jan 24 06:19:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.18" [Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src3.ximg exists [Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src3_1.ximg exists [Tue Jan 24 09:00:16 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src3 appears to have run properly [Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Tue Jan 24 09:00:17 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Tue Jan 24 12:47:12 2012] Spatial fit model total counts = 3474.440000, observed total counts = 3479.000000 [Tue Jan 24 12:47:12 2012] Offset between fit and detection position for source 3 = 0.118440 pixels [Tue Jan 24 12:47:12 2012] 3558.630000 total counts/ 1534.740000 bgd. counts: snr = 51.661796 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.118440 pixels Position = (372.4, 306.2) = 0 42 22.79 41 15 34.8 Extent = 5.0" x 4.5", rotation angle = 86 Source counts = 2023.9 +/- 59.7 Background counts = 1534.7 Rate = 0.1 +/- 0.003 [Tue Jan 24 12:47:12 2012] Vigneting correction estimate = 1.000000 [Tue Jan 24 12:47:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jan 24 12:47:12 2012] Assessing source extent using major [Tue Jan 24 12:47:12 2012] Source does appear to be extended [Tue Jan 24 12:47:12 2012] Computing asymmetry using major and minor axis, asym = 1.11 [Wed Jan 25 05:28:03 2012] Counts = 2023.890000, rescaling region sizes by 2.000000 [Wed Jan 25 05:28:03 2012] XMMSAS src. selection expression = ellipse(32348.498470, 26589.691749, 601.481274, 541.886099, 86.486749, X, Y) [Wed Jan 25 05:28:03 2012] Writing source region out to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src3_src.reg [Wed Jan 25 05:28:03 2012] Extracting stamp from image fullrun_mos1_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (338, 272) - (407, 341) [Wed Jan 25 05:28:03 2012] XMMSAS bgd. selection expression = annulus(32348.498470, 26589.691749, 2004.937579, 4009.875159, X, Y) && !ellipse(28821.182860, 27157.143400, 406.109612, 406.109612, 0.000000, X, Y) && !ellipse(30499.987020, 27522.410400, 404.149612, 404.149612, 0.000000, X, Y) && !ellipse(34557.811236, 30217.759239, 491.352090, 390.341946, 218.035975, X, Y) && !ellipse(30271.468159, 23759.330395, 436.513248, 384.701942, 333.932200, X, Y) && !ellipse(33418.142678, 22751.049991, 513.241866, 313.032554, 110.869471, X, Y) && !ellipse(33320.185200, 24728.431000, 382.945611, 333.704010, 303.511215, X, Y) && !ellipse(27923.308929, 26927.322479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35779.258345, 29816.806931, 496.503040, 365.006621, 54.390203, X, Y) && !ellipse(34118.949890, 22993.155823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32707.589417, 27079.755676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31156.297800, 22742.908600, 409.522412, 409.522412, 0.000000, X, Y) && !ellipse(28147.442000, 26527.344000, 1178.400034, 1178.400034, 0.000000, X, Y) && !ellipse(32497.713940, 24178.560000, 278.912008, 278.912008, 0.000000, X, Y) && !ellipse(34770.956055, 29670.535919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28619.890200, 25242.300400, 291.696808, 291.696808, 0.000000, X, Y) && !ellipse(28447.058447, 30389.692032, 478.301434, 314.314265, 170.903297, X, Y) && !ellipse(32308.206540, 24821.951200, 254.115207, 254.115207, 0.000000, X, Y) && !ellipse(35396.727875, 29257.607178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29223.832000, 27232.722000, 1311.336038, 1311.336038, 0.000000, X, Y) && !ellipse(28347.340800, 24031.238800, 428.138156, 428.138156, 0.000000, X, Y) && !ellipse(30955.147949, 24318.827881, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jan 25 05:28:03 2012] Writing fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src3.gif [Wed Jan 25 05:31:51 2012] Mean detx,y = (1021.38, 4638.78) [Wed Jan 25 05:31:52 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jan 25 05:32:12 2012] Binned source spectrum to 10 counts/bin [Wed Jan 25 05:32:12 2012] Setting source spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Jan 25 05:32:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src3_bgd.pi.gz [Wed Jan 25 12:14:47 2012] Updating aperture counts using extracted products [Wed Jan 25 12:14:47 2012] Error reading totcts from fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Jan 25 12:14:51 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 25 12:14:51 2012] Using photon index=1.80, rate=0.11, arf fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src3.arf [Wed Jan 25 12:14:51 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 25 12:14:51 2012] Updating source flux to 1.3e-12 [Wed Jan 25 12:15:08 2012] Flag c found in src. 3 procflags, skipping spectral fitting