[Mon Jan 23 10:17:33 2012] Detection parameters:
  Position = (266.6, 340.7) = 0 43 3.61 41 18 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 962.7 +/- 38.3
  Background counts = 24.4
  Rate = 0.07 +/- 0.003

[Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 3.84'
[Mon Jan 23 16:04:54 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 16:04:54 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Mon Jan 23 16:04:54 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.068
[Mon Jan 23 16:04:54 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.35"
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src15.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src15.csv
[Mon Jan 23 19:45:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Jan 23 19:45:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src15.csv
[Mon Jan 23 19:45:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Jan 23 19:45:18 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jan 23 19:45:18 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Jan 23 23:43:53 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.242653 pixels away
[Mon Jan 23 23:43:53 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:43:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:43:53 2012] Assessing source extent using major
[Mon Jan 23 23:43:53 2012] Source does appear to be extended
[Mon Jan 23 23:43:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 06:19:11 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 06:19:11 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Tue Jan 24 06:19:11 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.068
[Tue Jan 24 06:19:11 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.35"
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src15.csv
[Tue Jan 24 09:00:16 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jan 24 09:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src15.csv
[Tue Jan 24 09:00:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jan 24 09:00:17 2012] fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jan 24 09:00:17 2012] Fit fullrun_mos1_xmm0600660201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jan 24 12:47:12 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.242653 pixels away
[Tue Jan 24 12:47:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 12:47:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 12:47:12 2012] Assessing source extent using major
[Tue Jan 24 12:47:12 2012] Source does appear to be extended
[Tue Jan 24 12:47:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 05:28:03 2012] XMMSAS src. selection expression = ellipse(23145.334137, 29594.644562, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 05:28:03 2012] Writing source region out to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src13_src.reg
[Wed Jan 25 05:28:03 2012] Extracting stamp from image fullrun_mos1_xmm0600660201_pi300-10000_cl_sm2.00.img.gz, (229, 303) - (304, 378)
[Wed Jan 25 05:28:03 2012] XMMSAS bgd. selection expression = annulus(23145.334137, 29594.644562, 1087.500000, 2175.000000, X, Y) && !ellipse(25162.902000, 27150.744000, 345.231210, 345.231210, 0.000000, X, Y) && !ellipse(25685.214813, 26670.498840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.919800, 31076.656800, 392.820011, 392.820011, 0.000000, X, Y) && !ellipse(24032.285360, 27207.755600, 367.811211, 367.811211, 0.000000, X, Y) && !ellipse(25077.845001, 30221.871338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23029.686371, 27074.419067, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 05:28:03 2012] Writing fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src13.gif
[Wed Jan 25 05:37:39 2012] Mean detx,y = (1356.91, -5039.08) 
[Wed Jan 25 05:37:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 05:37:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 05:37:58 2012] Setting source spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jan 25 05:37:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Jan 25 06:54:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 06:54:32 2012] rmf not generated due to insufficient counts
[Wed Jan 25 12:14:47 2012] Updating aperture counts using extracted products
[Wed Jan 25 12:14:47 2012] Error reading totcts from fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jan 25 12:14:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 12:14:52 2012] Using photon index=1.80, rate=0.068, arf fullrun_mos1_xmm0600660201_pi300-10000_pass1_cl_src13.arf
[Wed Jan 25 12:14:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 12:14:52 2012] Updating source flux to 8.2e-13
[Wed Jan 25 12:15:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting