[Mon Jun 10 18:18:39 2013] Detection parameters:
  Position = (213.6, 179.9) = 0 6 39.35 20 4 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1151.5 +/- 44.7
  Background counts = 240.0
  Rate = 0.009 +/- 0.0003

[Mon Jun 10 18:18:41 2013] Off-axis axis estimate = 10.56'
[Mon Jun 10 18:26:21 2013] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:26:21 2013] Initial guess for spatial extent in simple fitting = 11.71"
[Mon Jun 10 18:26:21 2013] source mask rpix=2.7, npix_max = 40, mask sum = 39, frac = 0.957
[Mon Jun 10 18:26:21 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 11.71"
[Mon Jun 10 21:25:20 2013] fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jun 10 21:25:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_src13.csv
[Mon Jun 10 21:25:20 2013] fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jun 10 21:25:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_src13.csv
[Mon Jun 10 21:25:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 21:25:21 2013] fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jun 10 21:25:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon Jun 10 21:25:21 2013] fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jun 10 21:25:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon Jun 10 21:25:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:43:04 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 15.734654 pixels away
[Mon Jun 10 23:43:04 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 23:43:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 23:43:04 2013] Assessing source extent using major
[Mon Jun 10 23:43:04 2013] Source does appear to be extended
[Mon Jun 10 23:43:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 23:43:36 2013] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 23:43:36 2013] Initial guess for spatial extent in simple fitting = 11.71"
[Mon Jun 10 23:43:36 2013] source mask rpix=2.7, npix_max = 40, mask sum = 39, frac = 0.957
[Mon Jun 10 23:43:36 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 11.71"
[Tue Jun 11 02:25:15 2013] fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jun 11 02:25:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_src13.csv
[Tue Jun 11 02:25:15 2013] fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jun 11 02:25:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_src13.csv
[Tue Jun 11 02:25:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 02:25:16 2013] fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jun 11 02:25:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jun 11 02:25:17 2013] fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jun 11 02:25:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jun 11 02:25:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 04:56:39 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 15.734654 pixels away
[Tue Jun 11 04:56:39 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 04:56:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 04:56:39 2013] Assessing source extent using major
[Tue Jun 11 04:56:39 2013] Source does appear to be extended
[Tue Jun 11 04:56:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 04:57:12 2013] Counts = 1151.455078, rescaling region sizes by 2.000000
[Tue Jun 11 04:57:12 2013] XMMSAS src. selection expression = ellipse(18538.007370, 15605.202271, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 11 04:57:12 2013] Writing source region out to fullrun_pn_xmm0600540601_pi300-10000_pass1_cl_src14_src.reg
[Tue Jun 11 04:57:12 2013] Extracting stamp from image fullrun_pn_xmm0600540601_pi300-10000_cl_sm2.00.img.gz, (139, 105) - (289, 255)
[Tue Jun 11 04:57:12 2013] XMMSAS bgd. selection expression = annulus(18538.007370, 15605.202271, 4350.000000, 8700.000000, X, Y) && !ellipse(24176.297200, 24762.644000, 1551.544845, 1542.254444, 9.179600, X, Y) && !ellipse(22322.705170, 24095.797455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17042.497070, 23731.200867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18706.730499, 17436.394562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21292.948074, 12492.371582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22147.622940, 22546.585800, 439.135213, 352.559210, 10.762900, X, Y) && !ellipse(11147.966965, 17690.624237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.715500, 14769.597600, 522.728815, 365.721611, 328.852953, X, Y) && !ellipse(23272.491455, 8206.927292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18252.841200, 23932.237200, 424.289612, 321.594409, 121.035900, X, Y) && !ellipse(12810.631271, 11403.475037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23994.319580, 23412.671692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22839.240000, 23523.640000, 1266.648036, 904.920026, 353.832030, X, Y) && !ellipse(18670.226501, 23152.274384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12635.731216, 21178.246826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.093560, 20651.179700, 355.004010, 355.004010, 0.000000, X, Y) && !ellipse(18370.254654, 20470.482391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10133.244400, 20397.426000, 664.340019, 295.238408, 67.187688, X, Y) && !ellipse(24072.819600, 20066.435000, 359.048010, 359.048010, 0.000000, X, Y) && !ellipse(22744.527800, 18926.538400, 1190.320034, 234.587207, 291.823700, X, Y) && !ellipse(19636.780624, 18673.405899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21372.037415, 16952.466354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11829.161194, 16504.927979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22399.809875, 16467.219925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16093.557400, 11826.153048, 2165.920062, 1297.816037, 102.039021, X, Y) && !ellipse(10233.378403, 14990.799286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15636.478800, 14560.623600, 602.438417, 282.904808, 27.270842, X, Y) && !ellipse(18948.347458, 13484.889236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12195.995972, 12437.239899, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 11 04:57:12 2013] Writing fullrun_pn_xmm0600540601_pi300-10000_pass1_cl_src14.gif
[Tue Jun 11 05:41:17 2013] Mean detx,y = (2576.97, -10647.79) 
[Tue Jun 11 05:41:27 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 05:44:05 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 05:44:05 2013] Setting source spectrum file to fullrun_pn_xmm0600540601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jun 11 05:44:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0600540601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jun 11 08:12:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 08:12:40 2013] rmf not generated due to insufficient counts
[Tue Jun 11 11:31:57 2013] Updating aperture counts using extracted products
[Tue Jun 11 11:31:57 2013] Total counts from fullrun_pn_xmm0600540601_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 4866.00
[Tue Jun 11 11:31:57 2013] Total counts from fullrun_pn_xmm0600540601_pi300-10000_pass1_cl_src14_bgd.pi.gz = 90737.00
[Tue Jun 11 11:31:57 2013] Got source and background scale factors 4722658.000000, 99453657.000000
[Tue Jun 11 11:31:57 2013] User source parameters:
  Position = (213.6, 179.9) = 0 6 39.35 20 4 31.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 557.3 +/- 70.8
  Background aperture counts = 4308.7
  Rate = 0.005 +/- 0.0006

[Tue Jun 11 11:31:57 2013] Updating counts from extracted products
[Tue Jun 11 11:31:57 2013] Set source signif. to 557.26/65.64 = 8.49
[Tue Jun 11 11:32:13 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 11:32:13 2013] Using photon index=1.80, rate=0.0051, arf fullrun_pn_xmm0600540601_pi300-10000_pass1_cl_src14.arf
[Tue Jun 11 11:32:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 11:32:13 2013] Updating source flux to 2.5e-14
[Tue Jun 11 11:32:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 11:33:11 2013] xmm0600540601/analysis//spectral/fullrun_pn_xmm0600540601_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete