[Mon Jun 10 18:19:46 2013] Detection parameters:
  Position = (268.7, 290.3) = 0 6 22.37 20 12 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.1 +/- 31.9
  Background counts = 171.3
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 18:19:46 2013] Off-axis axis estimate = 2.24'
[Mon Jun 10 22:02:06 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:02:06 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Mon Jun 10 22:02:06 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.251
[Mon Jun 10 22:02:06 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 7.55"
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src26.csv
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src26.csv
[Mon Jun 10 23:42:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 10 23:42:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:43:19 2013] Source 38 is offset by 7.205638 and -4.868722 pixels which is larger than
2 X fitted extent = 6.940276 x 6.940276, not incorporating fit results
[Mon Jun 10 23:43:19 2013] Spatial fit model total counts = 5583.510000, observed total counts = 10001.000000
[Mon Jun 10 23:43:19 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 23:43:19 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 23:43:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 23:43:19 2013] Assessing source extent using major
[Mon Jun 10 23:43:19 2013] Source does appear to be extended
[Mon Jun 10 23:43:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 23:43:19 2013] Source is confused with source 39
[Tue Jun 11 03:15:52 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 03:15:52 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Tue Jun 11 03:15:52 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.251
[Tue Jun 11 03:15:52 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 7.55"
[Tue Jun 11 04:56:17 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src26.ximg exists
[Tue Jun 11 04:56:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src26.csv
[Tue Jun 11 04:56:17 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Jun 11 04:56:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src26.csv
[Tue Jun 11 04:56:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 04:56:18 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Jun 11 04:56:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jun 11 04:56:18 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Jun 11 04:56:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jun 11 04:56:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 04:56:54 2013] Warning, spatial fit 26 centroid is now closest to src. 39
[Tue Jun 11 04:56:54 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 04:56:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 04:56:54 2013] Assessing source extent using major
[Tue Jun 11 04:56:54 2013] Source does appear to be extended
[Tue Jun 11 04:56:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 10:23:22 2013] XMMSAS src. selection expression = ellipse(23324.272491, 25209.829163, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 11 10:23:22 2013] Writing source region out to fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src38_src.reg
[Tue Jun 11 10:23:22 2013] Extracting stamp from image fullrun_mos2_xmm0600540601_pi300-10000_cl_sm2.00.img.gz, (231, 253) - (306, 328)
[Tue Jun 11 10:23:22 2013] XMMSAS bgd. selection expression = annulus(23324.272491, 25209.829163, 1087.500000, 2175.000000, X, Y) && !ellipse(24181.323400, 24769.915200, 1394.512840, 1253.284836, 22.558400, X, Y) && !ellipse(23944.397064, 26050.291962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23315.887909, 23958.269592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22124.555023, 22553.273224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23380.373260, 24846.655670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25543.515900, 23294.698120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25899.980133, 24512.209595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25968.012604, 23737.973846, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 11 10:23:22 2013] Writing fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src38.gif
[Tue Jun 11 10:39:03 2013] Mean detx,y = (-825.78, -129.28) 
[Tue Jun 11 10:39:04 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 10:39:12 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 10:39:12 2013] Setting source spectrum file to fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Jun 11 10:39:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue Jun 11 11:22:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 11:22:10 2013] rmf not generated due to insufficient counts
[Tue Jun 11 11:32:27 2013] Updating aperture counts using extracted products
[Tue Jun 11 11:32:27 2013] Total counts from fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 3469.00
[Tue Jun 11 11:32:27 2013] Total counts from fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src38_bgd.pi.gz = 2926.00
[Tue Jun 11 11:32:27 2013] Got source and background scale factors 1198544.000000, 5867688.000000
[Tue Jun 11 11:32:27 2013] User source parameters:
  Position = (268.7, 290.3) = 0 6 22.37 20 12 36.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2871.3 +/- 59.9
  Background aperture counts = 597.7
  Rate = 0.02 +/- 0.0005

[Tue Jun 11 11:32:27 2013] Updating counts from extracted products
[Tue Jun 11 11:32:27 2013] Set source signif. to 2871.33/24.45 = 117.45
[Tue Jun 11 11:32:32 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 11:32:32 2013] Using photon index=1.80, rate=0.0239, arf fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src38.arf
[Tue Jun 11 11:32:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 11:32:32 2013] Updating source flux to 2.3e-13
[Tue Jun 11 11:32:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 11:32:49 2013] xmm0600540601/analysis//spectral/fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete