[Mon Jun 10 18:19:45 2013] Detection parameters:
  Position = (249.8, 368.9) = 0 6 28.21 20 18 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.1 +/- 20.6
  Background counts = 143.6
  Rate = 0.001 +/- 0.0002

[Mon Jun 10 18:19:46 2013] Off-axis axis estimate = 6.21'
[Mon Jun 10 22:02:06 2013] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:02:06 2013] Initial guess for spatial extent in simple fitting = 9.53"
[Mon Jun 10 22:02:06 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Mon Jun 10 22:02:06 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 9.53"
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src28.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src28.csv
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src28.csv
[Mon Jun 10 23:42:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon Jun 10 23:42:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:43:19 2013] Warning, spatial fit 28 centroid is now closest to src. 25
[Mon Jun 10 23:43:19 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 23:43:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 23:43:19 2013] Assessing source extent using major
[Mon Jun 10 23:43:19 2013] Source does appear to be extended
[Mon Jun 10 23:43:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 03:15:52 2013] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 03:15:52 2013] Initial guess for spatial extent in simple fitting = 9.53"
[Tue Jun 11 03:15:52 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Tue Jun 11 03:15:52 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 9.53"
[Tue Jun 11 04:56:17 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src28.ximg exists
[Tue Jun 11 04:56:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src28.csv
[Tue Jun 11 04:56:17 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Jun 11 04:56:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src28.csv
[Tue Jun 11 04:56:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 04:56:18 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Jun 11 04:56:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue Jun 11 04:56:18 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Jun 11 04:56:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue Jun 11 04:56:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 04:56:54 2013] Warning, spatial fit 28 centroid is now closest to src. 25
[Tue Jun 11 04:56:54 2013] Spatial fit model total counts = 745.259000, observed total counts = 662.000000
[Tue Jun 11 04:56:54 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 11 04:56:54 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 04:56:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 04:56:54 2013] Assessing source extent using major
[Tue Jun 11 04:56:54 2013] Source does appear to be extended
[Tue Jun 11 04:56:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 10:23:22 2013] XMMSAS src. selection expression = ellipse(21682.188644, 32043.070099, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 11 10:23:22 2013] Writing source region out to fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src24_src.reg
[Tue Jun 11 10:23:22 2013] Extracting stamp from image fullrun_mos2_xmm0600540601_pi300-10000_cl_sm2.00.img.gz, (212, 331) - (287, 406)
[Tue Jun 11 10:23:22 2013] XMMSAS bgd. selection expression = annulus(21682.188644, 32043.070099, 1087.500000, 2175.000000, X, Y) && !ellipse(24064.762817, 34238.402313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22327.500153, 31807.614136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20565.385086, 32378.410919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20375.334106, 32779.256622, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 11 10:23:22 2013] Writing fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src24.gif
[Tue Jun 11 10:39:44 2013] Mean detx,y = (-4795.08, -5999.39) 
[Tue Jun 11 10:39:45 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 10:40:01 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 10:40:01 2013] Setting source spectrum file to fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Jun 11 10:40:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue Jun 11 11:22:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 11:22:39 2013] rmf not generated due to insufficient counts
[Tue Jun 11 11:32:27 2013] Updating aperture counts using extracted products
[Tue Jun 11 11:32:27 2013] Total counts from fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 454.00
[Tue Jun 11 11:32:27 2013] Total counts from fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src24_bgd.pi.gz = 2559.00
[Tue Jun 11 11:32:27 2013] Got source and background scale factors 1277086.000000, 7957001.000000
[Tue Jun 11 11:32:27 2013] User source parameters:
  Position = (249.8, 368.9) = 0 6 28.21 20 18 13.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 43.3 +/- 22.3
  Background aperture counts = 410.7
  Rate = 0.0004 +/- 0.0002

[Tue Jun 11 11:32:27 2013] Updating counts from extracted products
[Tue Jun 11 11:32:27 2013] Set source signif. to 43.28/20.27 = 2.14
[Tue Jun 11 11:32:32 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 11:32:32 2013] Using photon index=1.80, rate=0.000361, arf fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src24.arf
[Tue Jun 11 11:32:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 11:32:32 2013] Updating source flux to 4.9e-15
[Tue Jun 11 11:32:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 11:32:49 2013] xmm0600540601/analysis//spectral/fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete