[Mon Jun 10 18:19:45 2013] Detection parameters:
  Position = (346.9, 469.6) = 0 5 58.17 20 25 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.0 +/- 18.5
  Background counts = 101.4
  Rate = 0.0007 +/- 0.0001

[Mon Jun 10 18:19:46 2013] Off-axis axis estimate = 12.90'
[Mon Jun 10 22:02:06 2013] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:02:06 2013] Initial guess for spatial extent in simple fitting = 12.88"
[Mon Jun 10 22:02:06 2013] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.877
[Mon Jun 10 22:02:06 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 12.88"
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src49.csv
[Mon Jun 10 23:42:48 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jun 10 23:42:48 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src49.csv
[Mon Jun 10 23:42:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:42:49 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jun 10 23:42:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 10 23:42:49 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jun 10 23:42:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 10 23:42:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:43:19 2013] Spatial fit model total counts = -122.210000, observed total counts = 468.000000
[Mon Jun 10 23:43:19 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 23:43:19 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 23:43:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 23:43:19 2013] Assessing source extent using major
[Mon Jun 10 23:43:19 2013] Source does appear to be extended
[Mon Jun 10 23:43:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 03:15:52 2013] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 03:15:52 2013] Initial guess for spatial extent in simple fitting = 12.88"
[Tue Jun 11 03:15:52 2013] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.877
[Tue Jun 11 03:15:52 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 12.88"
[Tue Jun 11 04:56:17 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src46.ximg exists
[Tue Jun 11 04:56:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src46.csv
[Tue Jun 11 04:56:17 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src46_1.ximg exists
[Tue Jun 11 04:56:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src46.csv
[Tue Jun 11 04:56:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 04:56:18 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Tue Jun 11 04:56:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue Jun 11 04:56:18 2013] fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Tue Jun 11 04:56:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue Jun 11 04:56:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 04:56:54 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.941799 pixels away
[Tue Jun 11 04:56:54 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 04:56:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 04:56:54 2013] Assessing source extent using major
[Tue Jun 11 04:56:54 2013] Source does appear to be extended
[Tue Jun 11 04:56:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 10:23:22 2013] XMMSAS src. selection expression = ellipse(30131.520691, 40808.957306, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 11 10:23:22 2013] Writing source region out to fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src14_src.reg
[Tue Jun 11 10:23:22 2013] Extracting stamp from image fullrun_mos2_xmm0600540601_pi300-10000_cl_sm2.00.img.gz, (309, 432) - (384, 507)
[Tue Jun 11 10:23:22 2013] XMMSAS bgd. selection expression = annulus(30131.520691, 40808.957306, 1087.500000, 2175.000000, X, Y) && !ellipse(30905.164368, 39279.068359, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 11 10:23:22 2013] Writing fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src14.gif
[Tue Jun 11 10:46:11 2013] Mean detx,y = (352.84, -16957.67) 
[Tue Jun 11 10:46:12 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 10:46:29 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 10:46:29 2013] Setting source spectrum file to fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jun 11 10:46:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jun 11 11:28:15 2013] Not generating rmf since there are only 96 counts
[Tue Jun 11 11:28:15 2013] rmf not generated due to insufficient counts
[Tue Jun 11 11:32:30 2013] Updating aperture counts using extracted products
[Tue Jun 11 11:32:30 2013] Total counts from fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 279.00
[Tue Jun 11 11:32:31 2013] Total counts from fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src14_bgd.pi.gz = 1174.00
[Tue Jun 11 11:32:31 2013] Got source and background scale factors 890676.000000, 3847471.000000
[Tue Jun 11 11:32:31 2013] User source parameters:
  Position = (346.9, 469.6) = 0 5 58.17 20 25 32.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 7.2 +/- 17.7
  Background aperture counts = 271.8
  Rate = 6e-05 +/- 0.0001

[Tue Jun 11 11:32:31 2013] Updating counts from extracted products
[Tue Jun 11 11:32:31 2013] Set source signif. to 7.22/16.49 = 0.44
[Tue Jun 11 11:32:32 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 11:32:32 2013] Using photon index=1.80, rate=6.02e-05, arf fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src14.arf
[Tue Jun 11 11:32:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 11:32:32 2013] Updating source flux to 1.8e-15
[Tue Jun 11 11:32:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 11:32:49 2013] xmm0600540601/analysis//spectral/fullrun_mos2_xmm0600540601_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete