[Mon Jun 10 18:19:08 2013] Detection parameters:
  Position = (89.9, 299.9) = 0 7 17.61 20 13 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.2 +/- 19.1
  Background counts = 99.5
  Rate = 0.001 +/- 0.0001

[Mon Jun 10 18:19:08 2013] Off-axis axis estimate = 15.12'
[Mon Jun 10 21:25:23 2013] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 21:25:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 21:25:23 2013] Initial guess for spatial extent in simple fitting = 13.99"
[Mon Jun 10 21:25:23 2013] source mask rpix=3.2, npix_max = 55, mask sum = 45, frac = 0.815
[Mon Jun 10 21:25:23 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 13.99"
[Mon Jun 10 22:02:05 2013] fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_src29.ximg exists
[Mon Jun 10 22:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_src29.csv
[Mon Jun 10 22:02:05 2013] fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Jun 10 22:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_src29.csv
[Mon Jun 10 22:02:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:02:05 2013] fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Jun 10 22:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Jun 10 22:02:05 2013] fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jun 10 22:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Jun 10 22:02:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600540601_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:43:10 2013] Warning, spatial fit 29 centroid is now closest to src. 11
[Mon Jun 10 23:43:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 23:43:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 23:43:10 2013] Assessing source extent using major
[Mon Jun 10 23:43:10 2013] Source does appear to be extended
[Mon Jun 10 23:43:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 02:25:18 2013] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 02:25:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 11 02:25:18 2013] Initial guess for spatial extent in simple fitting = 13.99"
[Tue Jun 11 02:25:18 2013] source mask rpix=3.2, npix_max = 55, mask sum = 45, frac = 0.815
[Tue Jun 11 02:25:18 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 13.99"
[Tue Jun 11 03:15:51 2013] fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_src28.ximg exists
[Tue Jun 11 03:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_src28.csv
[Tue Jun 11 03:15:51 2013] fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Jun 11 03:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_src28.csv
[Tue Jun 11 03:15:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 03:15:52 2013] fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Jun 11 03:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue Jun 11 03:15:52 2013] fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Jun 11 03:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue Jun 11 03:15:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600540601_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 04:56:45 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 17.093239 pixels away
[Tue Jun 11 04:56:45 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 04:56:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 04:56:45 2013] Assessing source extent using major
[Tue Jun 11 04:56:45 2013] Source does appear to be extended
[Tue Jun 11 04:56:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 09:39:31 2013] XMMSAS src. selection expression = ellipse(7774.715073, 26039.146149, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 11 09:39:31 2013] Writing source region out to fullrun_mos1_xmm0600540601_pi300-10000_pass1_cl_src12_src.reg
[Tue Jun 11 09:39:31 2013] Extracting stamp from image fullrun_mos1_xmm0600540601_pi300-10000_cl_sm2.00.img.gz, (52, 262) - (127, 337)
[Tue Jun 11 09:39:31 2013] XMMSAS bgd. selection expression = annulus(7774.715073, 26039.146149, 1087.500000, 2175.000000, X, Y) && !ellipse(9794.134000, 26792.700000, 798.815223, 260.071207, 92.046780, X, Y) && !ellipse(10222.668000, 27507.194000, 444.976813, 263.191208, 89.858000, X, Y) && !ellipse(9514.724580, 28033.895200, 567.634416, 248.468007, 105.242900, X, Y) && !ellipse(7856.862343, 24207.518433, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 11 09:39:31 2013] Writing fullrun_mos1_xmm0600540601_pi300-10000_pass1_cl_src12.gif
[Tue Jun 11 09:52:33 2013] Mean detx,y = (4325.58, 15736.72) 
[Tue Jun 11 09:52:34 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 09:52:56 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 09:52:56 2013] Setting source spectrum file to fullrun_mos1_xmm0600540601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jun 11 09:52:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0600540601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jun 11 10:22:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 11 10:22:43 2013] rmf not generated due to insufficient counts
[Tue Jun 11 11:32:20 2013] Updating aperture counts using extracted products
[Tue Jun 11 11:32:20 2013] Total counts from fullrun_mos1_xmm0600540601_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 262.00
[Tue Jun 11 11:32:20 2013] Total counts from fullrun_mos1_xmm0600540601_pi300-10000_pass1_cl_src12_bgd.pi.gz = 1314.00
[Tue Jun 11 11:32:20 2013] Got source and background scale factors 537204.000000, 1737371.000000
[Tue Jun 11 11:32:20 2013] User source parameters:
  Position = (89.9, 299.9) = 0 7 17.61 20 13 12.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -144.3 +/- 17.2
  Background aperture counts = 406.3
  Rate = -0.001 +/- 0.0001

[Tue Jun 11 11:32:20 2013] Updating counts from extracted products
[Tue Jun 11 11:32:20 2013] Set source signif. to -144.30/20.16 = -7.16
[Tue Jun 11 11:32:22 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 11:32:22 2013] Using photon index=1.80, rate=-0.00123, arf fullrun_mos1_xmm0600540601_pi300-10000_pass1_cl_src12.arf
[Tue Jun 11 11:32:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 11:32:22 2013] Updated flux is not positive, keeping original flux
[Tue Jun 11 11:32:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 11 11:32:41 2013] xmm0600540601/analysis//spectral/fullrun_mos1_xmm0600540601_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete