[Fri Feb 24 22:26:57 2012] Detection parameters:
  Position = (189.6, 340.7) = 9 15 49.93 18 23 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.1 +/- 12.2
  Background counts = 37.9
  Rate = 0.0008 +/- 0.0002

[Fri Feb 24 22:26:59 2012] Off-axis axis estimate = 8.47'
[Fri Feb 24 22:34:19 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 22:34:19 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Fri Feb 24 22:34:19 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.034
[Fri Feb 24 22:34:19 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.66"
[Sat Feb 25 00:25:07 2012] fullrun_pn_xmm0600460801_pi300-10000_cl_pass0_src9.ximg exists
[Sat Feb 25 00:25:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600460801_pi300-10000_cl_pass0_src9.csv
[Sat Feb 25 00:25:07 2012] fullrun_pn_xmm0600460801_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Feb 25 00:25:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600460801_pi300-10000_cl_pass0_src9.csv
[Sat Feb 25 00:25:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600460801_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600460801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 00:25:08 2012] fullrun_pn_xmm0600460801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Feb 25 00:25:08 2012] fullrun_pn_xmm0600460801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Feb 25 00:25:08 2012] Fit fullrun_pn_xmm0600460801_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Feb 25 02:34:29 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.529589 pixels away
[Sat Feb 25 02:34:29 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 02:34:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 02:34:29 2012] Assessing source extent using major
[Sat Feb 25 02:34:29 2012] Source does appear to be extended
[Sat Feb 25 02:34:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 02:35:04 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 02:35:04 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Sat Feb 25 02:35:04 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.034
[Sat Feb 25 02:35:04 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.66"
[Sat Feb 25 04:17:34 2012] fullrun_pn_xmm0600460801_pi300-10000_cl_pass1_src9.ximg exists
[Sat Feb 25 04:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600460801_pi300-10000_cl_pass1_src9.csv
[Sat Feb 25 04:17:34 2012] fullrun_pn_xmm0600460801_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Feb 25 04:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600460801_pi300-10000_cl_pass1_src9.csv
[Sat Feb 25 04:17:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600460801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600460801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 04:17:34 2012] fullrun_pn_xmm0600460801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Feb 25 04:17:34 2012] fullrun_pn_xmm0600460801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Feb 25 04:17:34 2012] Fit fullrun_pn_xmm0600460801_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Feb 25 06:23:30 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.896812 pixels away
[Sat Feb 25 06:23:30 2012] Spatial fit model total counts = 375.163000, observed total counts = 409.000000
[Sat Feb 25 06:23:30 2012] Offset between fit and detection position for source 9 = 1.937968 pixels
[Sat Feb 25 06:23:30 2012] 334.766400 total counts/ 239.816000 bgd. counts: snr = 6.131373
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.937968 pixels
  Position = (190.7, 339.1) = 9 15 49.57 18 23 30.6
  Extent = 9.6 (6.6-15.4)", rotation angle = 0
  Source counts = 95.0 +/- 18.3
  Background counts = 239.8
  Rate = 0.001 +/- 0.0003
[Sat Feb 25 06:23:30 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 06:23:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 06:23:30 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 06:23:30 2012] Source does appear to be extended
[Sat Feb 25 06:23:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:24:04 2012] XMMSAS src. selection expression = ellipse(16545.367200, 29454.614000, 577.909217, 577.909217, 0.000000, X, Y)
[Sat Feb 25 06:24:04 2012] Writing source region out to fullrun_pn_xmm0600460801_pi300-10000_pass1_cl_src9_src.reg
[Sat Feb 25 06:24:04 2012] Extracting stamp from image fullrun_pn_xmm0600460801_pi300-10000_cl_sm2.00.img.gz, (158, 306) - (224, 372)
[Sat Feb 25 06:24:04 2012] XMMSAS bgd. selection expression = annulus(16545.367200, 29454.614000, 963.182028, 1926.364055, X, Y) && !ellipse(17222.400600, 29627.884400, 740.991221, 740.991221, 0.000000, X, Y)
[Sat Feb 25 06:24:04 2012] Writing fullrun_pn_xmm0600460801_pi300-10000_pass1_cl_src9.gif
[Sat Feb 25 06:45:53 2012] Mean detx,y = (7445.27, 6669.48) 
[Sat Feb 25 06:46:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 06:47:03 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 06:47:03 2012] Setting source spectrum file to fullrun_pn_xmm0600460801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Feb 25 06:47:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600460801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Feb 25 08:27:46 2012] Not generating rmf since there are only 94 counts
[Sat Feb 25 08:27:46 2012] rmf not generated due to insufficient counts
[Sat Feb 25 10:33:16 2012] Updating aperture counts using extracted products
[Sat Feb 25 10:33:16 2012] Error reading totcts from fullrun_pn_xmm0600460801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Feb 25 10:33:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 10:33:19 2012] Using photon index=1.80, rate=0.00132, arf fullrun_pn_xmm0600460801_pi300-10000_pass1_cl_src9.arf
[Sat Feb 25 10:33:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 25 10:33:19 2012] Updating source flux to 1.5e-14
[Sat Feb 25 10:35:11 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting