[Fri Feb 24 22:28:42 2012] Detection parameters:
  Position = (127.8, 146.4) = 9 16 8.74 18 9 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.4 +/- 11.2
  Background counts = 9.0
  Rate = 0.001 +/- 0.0002

[Fri Feb 24 22:28:42 2012] Off-axis axis estimate = 16.57'
[Sat Feb 25 01:17:23 2012] Using EEF radius (= 14.71 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:17:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 01:17:23 2012] Initial guess for spatial extent in simple fitting = 14.71"
[Sat Feb 25 01:17:23 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.061
[Sat Feb 25 01:17:23 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 14.71"
[Sat Feb 25 02:34:12 2012] fullrun_mos2_xmm0600460801_pi300-10000_cl_pass0_src19.ximg exists
[Sat Feb 25 02:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600460801_pi300-10000_cl_pass0_src19.csv
[Sat Feb 25 02:34:12 2012] fullrun_mos2_xmm0600460801_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Feb 25 02:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600460801_pi300-10000_cl_pass0_src19.csv
[Sat Feb 25 02:34:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600460801_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600460801_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 02:34:13 2012] fullrun_mos2_xmm0600460801_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Feb 25 02:34:13 2012] fullrun_mos2_xmm0600460801_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Feb 25 02:34:13 2012] Fit fullrun_mos2_xmm0600460801_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Feb 25 02:34:44 2012] Warning, spatial fit 19 centroid is now closest to src. 33
[Sat Feb 25 02:34:44 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 15.779548 pixels away
[Sat Feb 25 02:34:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 02:34:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 02:34:44 2012] Assessing source extent using major
[Sat Feb 25 02:34:44 2012] Source does appear to be extended
[Sat Feb 25 02:34:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 05:08:37 2012] Using EEF radius (= 14.71 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:08:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 05:08:37 2012] Initial guess for spatial extent in simple fitting = 14.71"
[Sat Feb 25 05:08:37 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.061
[Sat Feb 25 05:08:37 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 14.71"
[Sat Feb 25 06:23:13 2012] fullrun_mos2_xmm0600460801_pi300-10000_cl_pass1_src19.ximg exists
[Sat Feb 25 06:23:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600460801_pi300-10000_cl_pass1_src19.csv
[Sat Feb 25 06:23:13 2012] fullrun_mos2_xmm0600460801_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Feb 25 06:23:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600460801_pi300-10000_cl_pass1_src19.csv
[Sat Feb 25 06:23:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600460801_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600460801_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 06:23:13 2012] fullrun_mos2_xmm0600460801_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Feb 25 06:23:13 2012] fullrun_mos2_xmm0600460801_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Feb 25 06:23:13 2012] Fit fullrun_mos2_xmm0600460801_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Feb 25 06:23:46 2012] Spatial fit model total counts = 208.637000, observed total counts = 189.000000
[Sat Feb 25 06:23:46 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Feb 25 06:23:46 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 15.929045 pixels away
[Sat Feb 25 06:23:46 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 06:23:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 06:23:46 2012] Assessing source extent using major
[Sat Feb 25 06:23:46 2012] Source does appear to be extended
[Sat Feb 25 06:23:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 09:43:28 2012] XMMSAS src. selection expression = ellipse(11068.873642, 12686.589630, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Feb 25 09:43:28 2012] Writing source region out to fullrun_mos2_xmm0600460801_pi300-10000_pass1_cl_src31_src.reg
[Sat Feb 25 09:43:28 2012] Extracting stamp from image fullrun_mos2_xmm0600460801_pi300-10000_cl_sm2.00.img.gz, (90, 109) - (165, 184)
[Sat Feb 25 09:43:28 2012] XMMSAS bgd. selection expression = annulus(11068.873642, 12686.589630, 1087.500000, 2175.000000, X, Y) && !ellipse(8686.794632, 14494.506607, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 25 09:43:28 2012] Writing fullrun_mos2_xmm0600460801_pi300-10000_pass1_cl_src31.gif
[Sat Feb 25 09:52:31 2012] Mean detx,y = (-10516.84, 7353.72) 
[Sat Feb 25 09:52:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 09:52:56 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 09:52:56 2012] Setting source spectrum file to fullrun_mos2_xmm0600460801_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Feb 25 09:52:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600460801_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Feb 25 10:28:05 2012] Not generating rmf since there are only 72 counts
[Sat Feb 25 10:28:05 2012] rmf not generated due to insufficient counts
[Sat Feb 25 10:33:26 2012] Updating aperture counts using extracted products
[Sat Feb 25 10:33:26 2012] Error reading totcts from fullrun_mos2_xmm0600460801_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Feb 25 10:33:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 10:33:28 2012] Using photon index=1.80, rate=0.00098, arf fullrun_mos2_xmm0600460801_pi300-10000_pass1_cl_src31.arf
[Sat Feb 25 10:33:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 25 10:33:28 2012] Getting flux using calc_pl_flux failed
[Sat Feb 25 10:34:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting