[Fri Feb 24 22:27:52 2012] Detection parameters:
  Position = (283.9, 102.1) = 9 15 21.10 18 6 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.2 +/- 20.2
  Background counts = 18.0
  Rate = 0.003 +/- 0.0003

[Fri Feb 24 22:27:52 2012] Off-axis axis estimate = 14.27'
[Sat Feb 25 00:25:08 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 00:25:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 00:25:08 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Sat Feb 25 00:25:08 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.069
[Sat Feb 25 00:25:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.57"
[Sat Feb 25 01:17:23 2012] fullrun_mos1_xmm0600460801_pi300-10000_cl_pass0_src1.ximg exists
[Sat Feb 25 01:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600460801_pi300-10000_cl_pass0_src1.csv
[Sat Feb 25 01:17:23 2012] fullrun_mos1_xmm0600460801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Feb 25 01:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600460801_pi300-10000_cl_pass0_src1.csv
[Sat Feb 25 01:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600460801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600460801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 01:17:23 2012] fullrun_mos1_xmm0600460801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 25 01:17:23 2012] fullrun_mos1_xmm0600460801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 25 01:17:23 2012] Fit fullrun_mos1_xmm0600460801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Feb 25 02:34:36 2012] Spatial fit model total counts = 673.795000, observed total counts = 673.000000
[Sat Feb 25 02:34:36 2012] Offset between fit and detection position for source 25 = 0.195300 pixels
[Sat Feb 25 02:34:36 2012] 674.179000 total counts/ 511.643000 bgd. counts: snr = 7.185650
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.195300 pixels
  Position = (283.7, 102.1) = 9 15 21.16 18 6 19.8
  Extent = 6.0 (5.1-7.2)", rotation angle = 0
  Source counts = 162.5 +/- 26.0
  Background counts = 511.6
  Rate = 0.002 +/- 0.0004
[Sat Feb 25 02:34:36 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 02:34:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 02:34:36 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 02:34:36 2012] Source does appear to be extended
[Sat Feb 25 02:34:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 04:17:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 04:17:35 2012] Initial guess for spatial extent in simple fitting = 6.03"
[Sat Feb 25 04:17:35 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.125
[Sat Feb 25 04:17:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.03"
[Sat Feb 25 05:08:37 2012] fullrun_mos1_xmm0600460801_pi300-10000_cl_pass1_src1.ximg exists
[Sat Feb 25 05:08:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600460801_pi300-10000_cl_pass1_src1.csv
[Sat Feb 25 05:08:37 2012] fullrun_mos1_xmm0600460801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Feb 25 05:08:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0600460801_pi300-10000_cl_pass1_src1.csv
[Sat Feb 25 05:08:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0600460801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0600460801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:08:37 2012] fullrun_mos1_xmm0600460801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Feb 25 05:08:37 2012] fullrun_mos1_xmm0600460801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Feb 25 05:08:37 2012] Fit fullrun_mos1_xmm0600460801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Feb 25 06:23:37 2012] Warning, spatial fit 1 centroid is now closest to src. 19
[Sat Feb 25 06:23:37 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 06:23:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 06:23:37 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 06:23:37 2012] Source does appear to be extended
[Sat Feb 25 06:23:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 09:19:24 2012] XMMSAS src. selection expression = ellipse(24631.623760, 8836.096200, 361.728610, 361.728610, 0.000000, X, Y)
[Sat Feb 25 09:19:24 2012] Writing source region out to fullrun_mos1_xmm0600460801_pi300-10000_pass1_cl_src25_src.reg
[Sat Feb 25 09:19:24 2012] Extracting stamp from image fullrun_mos1_xmm0600460801_pi300-10000_cl_sm2.00.img.gz, (263, 81) - (304, 123)
[Sat Feb 25 09:19:24 2012] XMMSAS bgd. selection expression = annulus(24631.623760, 8836.096200, 602.881017, 1205.762035, X, Y)
[Sat Feb 25 09:19:24 2012] Writing fullrun_mos1_xmm0600460801_pi300-10000_pass1_cl_src25.gif
[Sat Feb 25 09:19:29 2012] Mean detx,y = (15103.71, 1447.18) 
[Sat Feb 25 09:19:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 09:19:47 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 09:19:48 2012] Setting source spectrum file to fullrun_mos1_xmm0600460801_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Feb 25 09:19:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0600460801_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Feb 25 10:33:21 2012] Updating aperture counts using extracted products
[Sat Feb 25 10:33:21 2012] Error reading totcts from fullrun_mos1_xmm0600460801_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Feb 25 10:33:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 10:33:23 2012] Using photon index=1.80, rate=0.0022, arf fullrun_mos1_xmm0600460801_pi300-10000_pass1_cl_src25.arf
[Sat Feb 25 10:33:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 25 10:33:23 2012] Updating source flux to 7.5e-14
[Sat Feb 25 10:34:29 2012] Reading fit data from xmm0600460801/analysis//spectral/fullrun_mos1_xmm0600460801_pi300-10000_pass1_cl_src25_pl.csv
[Sat Feb 25 10:34:29 2012] Spectral fit parameter nH value = 7.64442e+20
[Sat Feb 25 10:34:29 2012] Spectral fit parameter PhoIndex value = 2.17017
[Sat Feb 25 10:34:29 2012] Failed to get F(0.3-8.0) from xmm0600460801/analysis//spectral/fullrun_mos1_xmm0600460801_pi300-10000_pass1_cl_src25_pl.csv, possibly due to different flux energy range selected
[Sat Feb 25 10:34:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 10:34:29 2012] Using Nh = 7.6e+20, photon index=2.17, rate=0.0022, arf fullrun_mos1_xmm0600460801_pi300-10000_pass1_cl_src25.arf
[Sat Feb 25 10:34:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 25 10:34:29 2012] Updating source flux to 6.7e-14