[Sun May 27 09:02:50 2012] Detection parameters:
  Position = (253.7, 234.7) = 4 56 51.41 22 45 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.2 +/- 16.6
  Background counts = 27.1
  Rate = 0.02 +/- 0.002

[Sun May 27 09:02:50 2012] Off-axis axis estimate = 5.65'
[Sun May 27 09:09:25 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Sun May 27 09:09:25 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Sun May 27 09:09:25 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.906
[Sun May 27 09:09:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.25"
[Sun May 27 09:12:21 2012] fullrun_mos2_xmm0600451201_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 09:12:21 2012] fullrun_mos2_xmm0600451201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 09:12:21 2012] Fit fullrun_mos2_xmm0600451201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun May 27 09:12:21 2012] fullrun_mos2_xmm0600451201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 09:12:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600451201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 27 09:12:21 2012] fullrun_mos2_xmm0600451201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 09:12:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600451201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 27 09:12:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600451201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600451201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 09:12:25 2012] Spatial fit model total counts = 205.934000, observed total counts = 192.000000
[Sun May 27 09:12:25 2012] Offset between fit and detection position for source 3 = 0.126624 pixels
[Sun May 27 09:12:25 2012] 205.636800 total counts/ 138.717000 bgd. counts: snr = 5.681850
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.126624 pixels
  Position = (253.8, 234.7) = 4 56 51.37 22 45 53.9
  Extent = 4.3" x 4.1", rotation angle = 250
  Source counts = 66.9 +/- 14.3
  Background counts = 138.7
  Rate = 0.007 +/- 0.002
[Sun May 27 09:12:25 2012] Vigneting correction estimate = 1.000000
[Sun May 27 09:12:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 09:12:25 2012] Assessing source extent using major
[Sun May 27 09:12:25 2012] Source does appear to be extended
[Sun May 27 09:12:25 2012] Computing asymmetry using major and minor axis, asym = 1.05
[Sun May 27 09:18:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 09:18:19 2012] Initial guess for spatial extent in simple fitting = 4.20"
[Sun May 27 09:18:19 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.047
[Sun May 27 09:18:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.20"
[Sun May 27 09:21:12 2012] fullrun_mos2_xmm0600451201_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 09:21:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600451201_pi300-10000_cl_pass1_src1.csv
[Sun May 27 09:21:12 2012] fullrun_mos2_xmm0600451201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 09:21:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600451201_pi300-10000_cl_pass1_src1.csv
[Sun May 27 09:21:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600451201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600451201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 09:21:12 2012] fullrun_mos2_xmm0600451201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 09:21:12 2012] fullrun_mos2_xmm0600451201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 09:21:12 2012] Fit fullrun_mos2_xmm0600451201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 27 09:21:15 2012] Spatial fit model total counts = 189.448000, observed total counts = 185.000000
[Sun May 27 09:21:15 2012] Offset between fit and detection position for source 3 = 0.012707 pixels
[Sun May 27 09:21:15 2012] 190.319100 total counts/ 124.850000 bgd. counts: snr = 5.859251
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.012707 pixels
  Position = (253.8, 234.7) = 4 56 51.37 22 45 54.0
  Extent = 4.1 (3.1-5.5)", rotation angle = 0
  Source counts = 65.5 +/- 13.8
  Background counts = 124.8
  Rate = 0.007 +/- 0.001
[Sun May 27 09:21:15 2012] Vigneting correction estimate = 1.000000
[Sun May 27 09:21:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 09:21:15 2012] Assessing source extent using major axis lower bound
[Sun May 27 09:21:15 2012] Source does appear to be extended
[Sun May 27 09:21:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 09:25:49 2012] XMMSAS src. selection expression = ellipse(22036.004800, 20367.446600, 246.708607, 246.708607, 0.000000, X, Y)
[Sun May 27 09:25:49 2012] Writing source region out to fullrun_mos2_xmm0600451201_pi300-10000_pass1_cl_src3_src.reg
[Sun May 27 09:25:49 2012] Extracting stamp from image fullrun_mos2_xmm0600451201_pi300-10000_cl_sm2.00.img.gz, (240, 220) - (268, 249)
[Sun May 27 09:25:49 2012] XMMSAS bgd. selection expression = annulus(22036.004800, 20367.446600, 411.181012, 822.362024, X, Y)
[Sun May 27 09:25:49 2012] Writing fullrun_mos2_xmm0600451201_pi300-10000_pass1_cl_src3.gif
[Sun May 27 09:25:51 2012] Mean detx,y = (-1270.61, 4682.58) 
[Sun May 27 09:25:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 09:25:57 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 09:25:57 2012] Setting source spectrum file to fullrun_mos2_xmm0600451201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 27 09:25:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600451201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 27 09:26:16 2012] Not generating rmf since there are only 65 counts
[Sun May 27 09:26:16 2012] rmf not generated due to insufficient counts
[Sun May 27 09:26:49 2012] Updating aperture counts using extracted products
[Sun May 27 09:26:50 2012] Error reading totcts from fullrun_mos2_xmm0600451201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 27 09:26:50 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 09:26:50 2012] Using photon index=1.80, rate=0.00712, arf fullrun_mos2_xmm0600451201_pi300-10000_pass1_cl_src3.arf
[Sun May 27 09:26:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 09:26:50 2012] Updating source flux to 1.3e-13
[Sun May 27 09:26:51 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 27 09:26:52 2012] xmm0600451201/analysis//spectral/fullrun_mos2_xmm0600451201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete