[Thu Aug  9 16:27:46 2012] Detection parameters:
  Position = (346.9, 193.3) = 16 27 49.88 27 32 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.3 +/- 11.5
  Background counts = 17.3
  Rate = 0.004 +/- 0.0007

[Thu Aug  9 16:27:46 2012] Off-axis axis estimate = 8.40'
[Thu Aug  9 16:30:14 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 16:30:14 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Thu Aug  9 16:30:14 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.039
[Thu Aug  9 16:30:14 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.63"
[Thu Aug  9 17:30:33 2012] fullrun_pn_xmm0600450601_pi300-10000_cl_pass0_src29.ximg exists
[Thu Aug  9 17:30:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450601_pi300-10000_cl_pass0_src29.csv
[Thu Aug  9 17:30:33 2012] fullrun_pn_xmm0600450601_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Aug  9 17:30:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450601_pi300-10000_cl_pass0_src29.csv
[Thu Aug  9 17:30:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600450601_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600450601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 17:30:33 2012] fullrun_pn_xmm0600450601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Aug  9 17:30:33 2012] fullrun_pn_xmm0600450601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Aug  9 17:30:33 2012] Fit fullrun_pn_xmm0600450601_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Aug  9 18:16:45 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 14.628881 pixels away
[Thu Aug  9 18:16:45 2012] Spatial fit model total counts = 343.026000, observed total counts = 342.000000
[Thu Aug  9 18:16:45 2012] Offset between fit and detection position for source 31 = 0.064340 pixels
[Thu Aug  9 18:16:45 2012] 346.319900 total counts/ 297.706000 bgd. counts: snr = 2.817518
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.064340 pixels
  Position = (347.0, 193.3) = 16 27 49.87 27 32 20.8
  Extent = 6.9 (4.6-11.5)", rotation angle = 0
  Source counts = 48.6 +/- 18.6
  Background counts = 297.7
  Rate = 0.003 +/- 0.001
[Thu Aug  9 18:16:45 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 18:16:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 18:16:45 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 18:16:45 2012] Source does appear to be extended
[Thu Aug  9 18:16:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 18:16:45 2012] Source is confused with source 30
[Thu Aug  9 18:17:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 18:17:07 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Thu Aug  9 18:17:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.918
[Thu Aug  9 18:17:07 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 6.91"
[Thu Aug  9 19:14:36 2012] fullrun_pn_xmm0600450601_pi300-10000_cl_pass1_src29.ximg exists
[Thu Aug  9 19:14:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450601_pi300-10000_cl_pass1_src29.csv
[Thu Aug  9 19:14:36 2012] fullrun_pn_xmm0600450601_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Aug  9 19:14:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450601_pi300-10000_cl_pass1_src29.csv
[Thu Aug  9 19:14:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600450601_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600450601_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:14:37 2012] fullrun_pn_xmm0600450601_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Aug  9 19:14:37 2012] fullrun_pn_xmm0600450601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Aug  9 19:14:37 2012] Fit fullrun_pn_xmm0600450601_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Thu Aug  9 19:57:21 2012] Warning, spatial fit 29 centroid is now closest to src. 30
[Thu Aug  9 19:57:21 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 19:57:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 19:57:21 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 19:57:21 2012] Source does appear to be extended
[Thu Aug  9 19:57:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 19:57:33 2012] XMMSAS src. selection expression = ellipse(30139.805538, 16769.991600, 414.382212, 414.382212, 0.000000, X, Y)
[Thu Aug  9 19:57:33 2012] Writing source region out to fullrun_pn_xmm0600450601_pi300-10000_pass1_cl_src31_src.reg
[Thu Aug  9 19:57:33 2012] Extracting stamp from image fullrun_pn_xmm0600450601_pi300-10000_cl_sm2.00.img.gz, (323, 170) - (371, 217)
[Thu Aug  9 19:57:33 2012] XMMSAS bgd. selection expression = annulus(30139.805538, 16769.991600, 690.637020, 1381.274040, X, Y) && !ellipse(30543.331665, 17030.736618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32091.378357, 14634.899246, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 19:57:33 2012] Writing fullrun_pn_xmm0600450601_pi300-10000_pass1_cl_src31.gif
[Thu Aug  9 20:19:15 2012] Mean detx,y = (-482.06, 11520.65) 
[Thu Aug  9 20:19:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 20:19:33 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 20:19:33 2012] Setting source spectrum file to fullrun_pn_xmm0600450601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Aug  9 20:19:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600450601_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Aug  9 20:36:14 2012] Not generating rmf since there are only 48 counts
[Thu Aug  9 20:36:14 2012] rmf not generated due to insufficient counts
[Thu Aug  9 20:52:55 2012] Updating aperture counts using extracted products
[Thu Aug  9 20:52:55 2012] Error reading totcts from fullrun_pn_xmm0600450601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Aug  9 20:52:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 20:52:56 2012] Using photon index=1.80, rate=0.0032, arf fullrun_pn_xmm0600450601_pi300-10000_pass1_cl_src31.arf
[Thu Aug  9 20:52:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 20:52:56 2012] Updating source flux to 1.8e-14
[Thu Aug  9 20:53:07 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Thu Aug  9 20:53:07 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting