[Fri May 18 10:45:06 2012] Detection parameters:
  Position = (304.6, 182.4) = 1 35 18.94 37 46 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.7 +/- 22.4
  Background counts = 16.3
  Rate = 0.02 +/- 0.001

[Fri May 18 10:45:06 2012] Off-axis axis estimate = 8.42'
[Fri May 18 10:49:09 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri May 18 10:49:09 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Fri May 18 10:49:09 2012] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.893
[Fri May 18 10:49:09 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.64"
[Fri May 18 11:19:41 2012] fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_src13.ximg exists
[Fri May 18 11:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_src13.csv
[Fri May 18 11:19:41 2012] fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri May 18 11:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_src13.csv
[Fri May 18 11:19:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 11:19:41 2012] fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri May 18 11:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri May 18 11:19:41 2012] fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 18 11:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri May 18 11:19:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 11:48:09 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.816758 pixels away
[Fri May 18 11:48:09 2012] Vigneting correction estimate = 1.000000
[Fri May 18 11:48:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 11:48:09 2012] Assessing source extent using major
[Fri May 18 11:48:09 2012] Source does appear to be extended
[Fri May 18 11:48:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 11:48:21 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri May 18 11:48:21 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Fri May 18 11:48:21 2012] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.893
[Fri May 18 11:48:21 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 10.64"
[Fri May 18 12:16:02 2012] fullrun_pn_xmm0600450501_pi300-10000_cl_pass1_src12.ximg exists
[Fri May 18 12:16:02 2012] fullrun_pn_xmm0600450501_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri May 18 12:16:02 2012] Fit fullrun_pn_xmm0600450501_pi300-10000_cl_pass1_src12 appears to have run properly
[Fri May 18 12:16:02 2012] fullrun_pn_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri May 18 12:16:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May 18 12:16:02 2012] fullrun_pn_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May 18 12:16:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May 18 12:16:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 12:42:01 2012] Spatial fit model total counts = 473.530000, observed total counts = 439.000000
[Fri May 18 12:42:01 2012] Offset between fit and detection position for source 13 = 0.162781 pixels
[Fri May 18 12:42:01 2012] 474.997000 total counts/ 234.566000 bgd. counts: snr = 15.698492
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.162781 pixels
  Position = (304.5, 182.5) = 1 35 19.00 37 46 36.3
  Extent = 6.7 (5.6-8.0)" x 5.2 (4.3-6.1)", rotation angle = 336 (310-0) degrees
  Source counts = 240.4 +/- 21.8
  Background counts = 234.6
  Rate = 0.04 +/- 0.003
[Fri May 18 12:42:01 2012] Vigneting correction estimate = 1.000000
[Fri May 18 12:42:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 12:42:01 2012] Assessing source extent using major axis lower bound
[Fri May 18 12:42:01 2012] Source does appear to be extended
[Fri May 18 12:42:01 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92
[Fri May 18 12:42:14 2012] XMMSAS src. selection expression = ellipse(26441.441200, 15826.614200, 400.465212, 309.476409, 335.570569, X, Y)
[Fri May 18 12:42:14 2012] Writing source region out to fullrun_pn_xmm0600450501_pi300-10000_pass1_cl_src13_src.reg
[Fri May 18 12:42:14 2012] Extracting stamp from image fullrun_pn_xmm0600450501_pi300-10000_cl_sm2.00.img.gz, (281, 159) - (327, 205)
[Fri May 18 12:42:14 2012] XMMSAS bgd. selection expression = annulus(26441.441200, 15826.614200, 667.442019, 1334.884038, X, Y)
[Fri May 18 12:42:14 2012] Writing fullrun_pn_xmm0600450501_pi300-10000_pass1_cl_src13.gif
[Fri May 18 12:51:53 2012] Mean detx,y = (-5709.86, -7487.14) 
[Fri May 18 12:51:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 12:52:22 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 12:52:23 2012] Setting source spectrum file to fullrun_pn_xmm0600450501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 18 12:52:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0600450501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri May 18 13:29:03 2012] Updating aperture counts using extracted products
[Fri May 18 13:29:04 2012] Error reading totcts from fullrun_pn_xmm0600450501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 18 13:29:04 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 13:29:04 2012] Using photon index=1.80, rate=0.0383, arf fullrun_pn_xmm0600450501_pi300-10000_pass1_cl_src13.arf
[Fri May 18 13:29:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 13:29:04 2012] Updating source flux to 2.4e-13