[Fri May 18 10:46:14 2012] Detection parameters:
  Position = (274.7, 298.5) = 1 35 29.95 37 54 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.9 +/- 24.6
  Background counts = 95.6
  Rate = 0.02 +/- 0.002

[Fri May 18 10:46:14 2012] Off-axis axis estimate = 1.72'
[Fri May 18 11:35:40 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri May 18 11:35:40 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri May 18 11:35:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.686
[Fri May 18 11:35:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri May 18 11:48:03 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 18 11:48:03 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 18 11:48:03 2012] Fit fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri May 18 11:48:03 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 18 11:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 18 11:48:03 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 18 11:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 18 11:48:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600450501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 11:48:13 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.734046 pixels away
[Fri May 18 11:48:13 2012] Vigneting correction estimate = 1.000000
[Fri May 18 11:48:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 11:48:13 2012] Assessing source extent using major
[Fri May 18 11:48:13 2012] Source does appear to be extended
[Fri May 18 11:48:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 12:28:36 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri May 18 12:28:36 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri May 18 12:28:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.686
[Fri May 18 12:28:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Fri May 18 12:41:56 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 18 12:41:56 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 18 12:41:56 2012] Fit fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri May 18 12:41:56 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 18 12:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 18 12:41:56 2012] fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 18 12:41:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 18 12:41:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0600450501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 12:42:05 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.973029 pixels away
[Fri May 18 12:42:05 2012] Vigneting correction estimate = 1.000000
[Fri May 18 12:42:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 12:42:05 2012] Assessing source extent using major
[Fri May 18 12:42:05 2012] Source does appear to be extended
[Fri May 18 12:42:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 13:24:17 2012] XMMSAS src. selection expression = ellipse(23848.162872, 25917.036041, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 13:24:17 2012] Writing source region out to fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src5_src.reg
[Fri May 18 13:24:17 2012] Extracting stamp from image fullrun_mos2_xmm0600450501_pi300-10000_cl_sm2.00.img.gz, (237, 261) - (312, 336)
[Fri May 18 13:24:17 2012] XMMSAS bgd. selection expression = annulus(23848.162872, 25917.036041, 1087.500000, 2175.000000, X, Y)
[Fri May 18 13:24:17 2012] Writing fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src5.gif
[Fri May 18 13:24:20 2012] Mean detx,y = (-713.93, -698.82) 
[Fri May 18 13:24:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 13:24:41 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 13:24:41 2012] Setting source spectrum file to fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May 18 13:24:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May 18 13:27:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 18 13:27:26 2012] rmf not generated due to insufficient counts
[Fri May 18 13:29:05 2012] Updating aperture counts using extracted products
[Fri May 18 13:29:05 2012] Error reading totcts from fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May 18 13:29:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 13:29:06 2012] Using photon index=1.80, rate=0.0238, arf fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src5.arf
[Fri May 18 13:29:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 13:29:06 2012] Updating source flux to 2.9e-13
[Fri May 18 13:29:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 18 13:29:26 2012] xmm0600450501/analysis//spectral/fullrun_mos2_xmm0600450501_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete